GMI PS1100 Operating instructions
Charge Battery
1
Start Instrument
Start OK
Approximate charging time = 4 hours
Automatic Self Test
Check LED’s and Buzzer
Unpack
PS1100
QUICK OPERATING INSTRUCTIONS
2
3
4
5
To CALb if calibration is required
CALb Background
Re-start Instrument
OFF
Switch OFF
Fit for use
7
6
Press the button until the
last LED is turned OFF
8
8
A
B
Fresh air 400ppm
C
Gas Measurement Instruments Ltd
www.gmiuk.com
GMI Document Part Number: 63331 Issue 1
When the instrument is in CALb
mode, the first Background
Calibration is done after ve (5)
hours. If the instrument is left in
CALb mode, it continues to do a
Background Calibration every four
(4) hours until the instrument is
restarted or switched OFF.
NOTE
If the status indicator is shown, the readings are not reliable!
The actions to take are as follows:
1) Charge the battery
2) Re-calibrate the carbon dioxide sensor zero point
(put the unit in CALb mode)
3) If the status indicator is still shown – contact your distributor
For logging of data and more detailed information, refer to the User
Manual (GMI Part No. 63330).
NOTE
(or enter CALb mode)
Table of contents
Other GMI Gas Detector manuals
GMI
GMI Oxygas P-500 Instruction Manual
GMI
GMI Gasurveyor 11-500 Instruction Manual
GMI
GMI PS500 Instruction Manual
GMI
GMI Gasurveyor 500 Series Instruction Manual
GMI
GMI OXYGAS 500 TRAINING User manual
GMI
GMI Gasurveyor 3-500 Instruction Manual
GMI
GMI GS700 User manual
GMI
GMI Gasurveyor 700 User manual
GMI
GMI PPM Gasurveyor 500 Instruction Manual
GMI
GMI PS500 Instruction Manual
Popular Gas Detector manuals by other brands
Macurco
Macurco GD-6 Operation manual
Evikon
Evikon E2632 user manual
Critical Environment Technologies
Critical Environment Technologies CGAS-A Series Installation & operation manual
MSA
MSA altair 5 operating manual
DOD Technologies
DOD Technologies ChemLogic CL96 operating manual
DEGA
DEGA NS III LCD Series instruction manual
