Globalcom BV1000CL User manual
This document contains the proprietary information of Globalcom Engineering. Its receipt or possession does not convey any rights to
reproduce or disclose its contents or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific
written authorization of Globalcom Engineering is strictly forbidden.
User Manual
Revision R01-13
P/N: MAEU010
BV1000CL
Contactless Unattended Reader
DRAFT V01
Globalcom Engineering
This document contains the proprietary information of Globalcom Engineering. Its receipt or possession does not convey any rights to
reproduce or disclose its contents or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific
written authorization of Globalcom Engineering is strictly forbidden. Mod.N:Q060R04
2
INDEX
BV1000CL......................................................................................................................................................... 1
INDEX .......................................................................................................................................................... 2
FIGURE INDEX .............................................................................................................................................. 2
1 DECLARATION OF CONFORMITY .................................................................................................................... 3
1.2 WARNINGS............................................................................................................................................. 5
1.3 BV1000CL ENVIRONMENT CONFORMITY..................................................................................................... 6
1.4 BV1000CL REAR INDICATIONS..................................................................................................................... 6
2 SAFETY INFORMATIONS AND INSTRUCTIONS ................................................................................................. 7
2.1 GENERAL SAFETY INFORMATION ............................................................................................................ 7
2.2 BASIC RULES .......................................................................................................................................... 7
2.3 IMPORTANT SAFETY INSTRUCTIONS ....................................................................................................... 7
3 WARRANTY CONDITIONS ............................................................................................................................... 8
4 VIEW AND ORDER CODES .............................................................................................................................. 9
4.1 OVERVIEW ........................................................................................................................................... 10
4.2 PACKING LIST ....................................................................................................................................... 11
5 TECHNICAL SPECIFICATIONS ........................................................................................................................ 12
5.1 BV1000CL TECHNICAL SPECIFICATIONS................................................................................................. 12
5.2 BV1000CL SPECIFICATIONS................................................................................................................... 13
6 BV1000CL CONNECTORS VIEW..................................................................................................................... 14
6.1 BV1000CL FRONT VIEW ........................................................................................................................ 14
6.2 BV1000CL BACK VIEW .......................................................................................................................... 15
7 CABLE.......................................................................................................................................................... 18
7.1 CAC0096 POWER CABLE ....................................................................................................................... 18
7.2 CAC0136 BV1000CL GBC SERIAL CABLE................................................................................................. 18
7.3 CAC0138 CABLE BV1000R-BV1000CL .................................................................................................... 19
8 MECHANICAL DIMENSIONS.......................................................................................................................... 20
8.1 BV1000CL MECHANICAL DIMENSIONS .................................................................................................. 20
8.2 BV1000CL PANEL DRILLING .................................................................................................................. 22
9 HOW TO CONTACT US ................................................................................................................................. 23
FIGURE INDEX
FIGURE 1 –Connector View of the BV1000CL ...................................................................................................................................... 15
FIGURE 2 –Mechanical dimension of the BV1000CL............................................................................................................................ 20
FIGURE 3 –BV1000CL Fixing Screws..................................................................................................................................................... 21
FIGURE 4 - Panel drilling BV1000CL ...................................................................................................................................................... 22
DRAFT V01
Globalcom Engineering
This document contains the proprietary information of Globalcom Engineering. Its receipt or possession does not convey any rights to
reproduce or disclose its contents or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific
written authorization of Globalcom Engineering is strictly forbidden. Mod.N:Q060R03
3
1 DECLARATION OF CONFORMITY
Globalcom Engineering declares that the payment system BV1000CL, whose characteristics are
described in this manual, is conform to all relevant essential requirements on radio equipment and
telecommunications terminal equipment RED Directive 2014/53/EU, EMC Directive 2014/30/EU
and ROHS directive 2011/65/EU.
The following standards and essential test suites published in the “Official Journal” of the
European communities, have been used to demonstrate the conformity of the product:
ETSI EN 300-330-1 - Electromagnetic compatibility and Radio spectrum Matters (ERM); Short
Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive
loop systems in the frequency range 9 kHz to 30 MHz - Part 1: Technical characteristics and test
methods.
ETSI EN 300-330-2 - Electromagnetic compatibility and Radio spectrum Matters (ERM); Short
Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive
loop systems in the frequency range 9 kHz to 30 MHz - Part 2: Harmonized EN covering the
essential requirements of article 3.2 of the R&TTE Directive.
ETSI EN 301-489-1 - Electromagnetic compatibility and Radio spectrum Matters (ERM);
Electromagnetic Compatibility (EMC) standard for radio equipment and services - Part 1:
Common technical requirements.
ETSI EN 301-489-3 - Electromagnetic compatibility and Radio spectrum Matters (ERM);
Electromagnetic Compatibility (EMC) standard for radio equipment and services - Part 3: Specific
conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 40 GHz.
EN60950-1 + A11 + A1 + A12+A2 –Information technology equipment –Safety –Part 1: General
requirements
Compliance with these requirements shall be evidenced by the affixing of the CE on the product.
The company responsible for placing the product on the market:
Globalcom Engineering S.p.A.
Via Volta 39 21010 Cardano Al Campo (VA) Italy
DRAFT V01
Globalcom Engineering
This document contains the proprietary information of Globalcom Engineering. Its receipt or possession does not convey any rights to
reproduce or disclose its contents or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific
written authorization of Globalcom Engineering is strictly forbidden. Mod.N:Q060R04
4
USA Radio Approval Federal Communications Commission (FCC)
PRODUCT NAME: BV1000CL
FCC ID: 2AKMTBV1000CL184A
FCC Rules: Code of Federal Regulations (CFR) no.47 Part 15 - Radio Frequency Devices
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Note: this equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction, may cause harmful interference to radio communications. However, there is no
guarantee that the interference will not occur in a particular installation. If this equipment causes
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measure:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that of the receiver.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications made to the equipment not expressly approved by Globalcom
Engineering SPA may void the FCC authorization to operate this equipment.
CANADA Radio Approval (IC)
ISED Certification Number: TO BE INSERTED
Innovation, Science and Economic Development Canada ICES-003 Compliance Label:
CAN ICES-3 (A)/NMB-3(A)
Changes or modifications made to the equipment not expressly approved by Globalcom
Engineering SPA may void the IC authorization to operate this equipment.
DRAFT V01
Globalcom Engineering
This document contains the proprietary information of Globalcom Engineering. Its receipt or possession does not convey any rights to
reproduce or disclose its contents or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific
written authorization of Globalcom Engineering is strictly forbidden. Mod.N:Q060R04
5
1.2 WARNINGS
This appliance is marked according to the European directive 2012/19/EU on waste electrical and
electronic equipment (WEEE Directive).
The symbol of crossed out wheeled bin on the product indicates that this WEEE must
not be treated as unsorted municipal waste and must be collected separately.
To assure the correct disposal and recycle of this product contact your supplier.
The abandonment or inappropriate disposal of waste can cause harm to environment and harm to
the human health.
By ensuring the correct disposal of this product you will help prevent negative consequences for
the environment and human health, also you will contribute to the preservation of the natural
resources. The device contains lithium manganese dioxide coin cells. The battery must be
disposed at the appropriate collection point.
BV1000CL is compliance with the Directive 2011/65/EU of the European Parliament of the Council
of 8 June 2011 on the restriction of certain hazardous substances in electrical and electronic
equipment (also known as RoHS Recast or RoHS2).
Specifically, BV1000CL do not contain the substances listed in the table below in concentration
greater than listed maximum value.
DRAFT V01
Globalcom Engineering
This document contains the proprietary information of Globalcom Engineering. Its receipt or possession does not convey any rights to
reproduce or disclose its contents or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific
written authorization of Globalcom Engineering is strictly forbidden. Mod.N:Q060R04
6
1.3 BV1000CL ENVIRONMENT CONFORMITY
Climatic and Vibration tests:
CEI EN 60068-2-1 - Environmental Testing Part 2-1: Tests: - Test A: Cold
CEI EN 60068-2-2 - Environmental Testing Part 2-2: Tests: - Test B: Dry heat
CEI EN 60068-2-14 - Environmental Testing Part 2-14: Tests: - Test N: Change of temperature
CEI EN 60068-2-30 - Environmental Testing Part 2-30: Tests: - Test Db: Damp heat, cyclic (12h +
12h cycle)
CEI EN 60068-2-78 - Environmental Testing Part 2-78: Tests: - Test Cab: Damp heat, steady state
CEI EN 60068-2-6 - Environmental Testing Part 2-6: Tests: - Test Fc: Vibration (sinusoidal)
Salt Mist test:
CEI EN 60068-2-11 - Environmental Testing Part 2-11: Tests: - Test Ka: Salt mist
External Mechanical Impact test (IK10) and Drop test:
CEI EN 62262 - Degrees of protection by enclosures for equipments against external mechanical
impact (IK10)
CEI EN 60068-2-31 - Environmental Testing Part 2-31: Tests: Test Eh: Hammer test
Verification of Internal Protection Code (IP65):
EN 60529+A1+A2 - Degrees of protection provided by enclosures (IP65)
1.4 BV1000CL REAR INDICATIONS
DRAFT V01
Globalcom Engineering
This document contains the proprietary information of Globalcom Engineering. Its receipt or possession does not convey any rights to
reproduce or disclose its contents or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific
written authorization of Globalcom Engineering is strictly forbidden. Mod.N:Q060R04
7
2 SAFETY INFORMATIONS AND INSTRUCTIONS
BV1000CL is conform to the standard EN60950-1+A11+A1+A12+A2 Electrical Safety of Data
Processing Equipment including Electrical Office Equipment.
2.1 GENERAL SAFETY INFORMATION
BV1000CL has been designed and manufactured to meet international safety standard but, like
any electrical apparatus, due care must still be taken.
-Read and understand the instructions before using the equipment
-Not remove any screws to enter into area for non operators
-Not allow liquid to spill into the internal cabinet side
-Not allow anything to rest on the power cord or telecomm cords and ensure a properly
routing of all the cable to prevent damage or accidental contact
-Not continue to operate with the equipment if you are in doubt about its normal working
or if the equipment has been damaged.
2.2 BASIC RULES
1) The responsibility of the safety for the sockets in the power circuits is of the customer
2) Verify that the power supply cable and the sockets are in good conditions
3) Don’t work in dangerous conditions when alone
4) If possible, connect and disconnect the signal cable at power off to avoid risk of shock
caused by possible contact of two equipment at different electrical potential.
5) The client must install a lighting protection if the zone is subject to thunderstorm or
overvoltage.
2.3 IMPORTANT SAFETY INSTRUCTIONS
At the receipt of the equipment is strongly advised to check them to see that there is no evidence
of tampering.
DRAFT V01
Globalcom Engineering
This document contains the proprietary information of Globalcom Engineering. Its receipt or possession does not convey any rights to
reproduce or disclose its contents or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific
written authorization of Globalcom Engineering is strictly forbidden. Mod.N:Q060R04
8
3 WARRANTY CONDITIONS
Globalcom Engineering warranties its products for a period of twelve months from the date of
delivery.
The warranty covers only defects in materials, defects in manufacturing and doesn’t cover
damages caused to the device by wrong or improper use, from accidental causes or from natural
use.
In addition, the warranty is not applicable in the following cases:
1. The model or the serial number of the device has been altered, erased, removed or made
unreadable.
2. The device has been repaired by unauthorized personnel.
3. The device has been damaged by external causes such as lightning, water, fire, connection
to wrong power supply voltages or sudden overvoltage in the electric system caused by
negligence in the use of the device (not observation of the instructions of use) or by
reasons not attributable to manufacturing defects.
4. The device has been modified to be used in a country different from the countries for
which has been designed or, where applicable, homologated; or has been damaged by
those modifications.
5. The warranty doesn’t cover wearing parts such as batteries, cables, connectors, external
parts or plastic supports that don’t show manufacturing defects.
6. The warranty doesn’t include periodic checks, software updates, settings and maintenance
operations.
The warranty doesn’t provide a spare device to substitute the damaged device during the period
of time necessary for the device reparation.
Shipping costs of the damaged devices is charged to the customer.
The damaged device\devices must be returned with the RMA (Return Authorization number) form
filled and a note indicating the damage or the problem found on the device\devices.
Please contact Globalcom Engineering distribution to obtain a RMA form.
After the end of warranty period, for any repair or assistance operation, will be applied the current
rates for the change of parts, for the labor cost and for the shipping cost.
DRAFT V01
Globalcom Engineering
This document contains the proprietary information of Globalcom Engineering. Its receipt or possession does not convey any rights to
reproduce or disclose its contents or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific
written authorization of Globalcom Engineering is strictly forbidden. Mod.N:Q060R04
9
4 VIEW AND ORDER CODES
PRODUCT CODE
ORDER CODE
DESCRIPTION
1ASA184H02
BV1000CL Compact Unattended Contactless Reader Ethernet Interface
DRAFT V01
Globalcom Engineering
This document contains the proprietary information of Globalcom Engineering. Its receipt or possession does not convey any rights to
reproduce or disclose its contents or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific
written authorization of Globalcom Engineering is strictly forbidden. Mod.N:Q060R04
10
4.1 OVERVIEW
BV1000CL is a low power unattended Contactless Reader for transaction in parking, buses,
vending machines or ticketing kiosks.
BV1000CL can be used alone or with BV1000R contact reader.
BV1000CL is compliant with EMVco Contactless Specification.
BV1000CL is available with the following interfaces:
Serial Port
USB OTG
Ethernet
GPRS (dongle on cable)
BV1000CL is available with the following Protocols interface:
Retailer Protocol
Mux Protocol
DRAFT V01
Table of contents
Other Globalcom Card Reader manuals
