GlacialLight GL-SP15-WW User manual
User Manual
GL-SP15 Series
1. The “Warranty Period” is two (2) years. We will warrant free repair or replacement services if
the product fails or becomes defective during normal use within the prescribed warrantee
period. Please send back the product to our company or contact your local distributors for
further directions.
2. Do not change or tamper with any internal electric circuits or add in any wires or cables for
any reason.
3. Do not change the mechanical design, circuit specifications, or components; do not add any
other devices as this may cause the product to short circuit or may create other unforeseen
risks.
4. Keep the lamp set in a dry environment in order to avoid any electricity leakage.
5. To avoid electrical shocks and possible malfunction, please do not insert objects of any
nature into the LED product.
6. For further information, please contact us.
CAUTION
Best Position
CAUTION
CLASS 2 LED LIGHT
DO NOT STARE INTO THE BEAM
GL-SP15
100V-240V~ 50-60Hz
Thanks for your choice of LED
SP15 series products. Please
ensure that you install and use the
product according to the below
directions to enable the correct
implementation and normal
functioning of the LED product.
Should you not follow these directions,
you will not be compensated in
accordance with the warrantee. We will not
take any responsibility from the improper
use and implementation of the product, and
for any associated damage caused by such
irresponsible and negligent actions.
1. Before installation,
please turn off the
power switch for the
existing bulb.
2. Please make sure that the specifications
of the power connector and the output
voltage are compatible to the LED
fixture used.
• Pick a vantage point based on the directions of human and car traffic
• Install the sensor at a location within 10 ~ 15 meter radius of the vantage point, 2.5 ~ 3 meter high and at an angel of adjustable
sensor is up / down 10° ~ 30° (best at 90 degree)
• Make sure the sensor is firmly screwed
Worst sensing effects
(Straightline moving forward)
Insufficent range due to low sensing angle
Short sensing range and prone to false detections
due to high sensing angle
4. Screw the LED fixture tight onto a wall
or a stand and adjust the angle in
accordance with individual needs.
5. Please plug the unit into an appropriate
power socket and turn the power on. If the
lamp does not work, please repeat steps
1-4 until it does work.
Installation process
Please get professional installation personnel to set up the fixture.
Indicators on the bottom of
the sensors
1. SENS: The intensity of sensing. + indicates strong sensing.
- indicates weak sensing.
2. LUX: The brightness of the environment. Moon mark (3lux)
indicates night sensing; effective when human
entering the sensing area in low illuminations. Please
avoid strong light resource because it may lead
sensor to false detections. Sun Mark (5lux) indicates
24-hour sensing regardless day or night. It is effective
whenever human entering the sensing area.
3. TIME: The light up time of sensing. From 7 seconds to 12
minutes.
SENS LUX TIME
10 m
15 m
(Lateral Moving)
Best sensing effects , Longest sensing range
2.5 m
3 m
3 m
Installation height and sensing angle are proper
~
~
10 m ~ 15 m
3 ~ 5 m 90° ~ 100°
30° ~ 35°
Ground wire
green
AC wire (N)
white or blue
AC wire (L)
black or brown
AC wire (L)
black or brown
AC wire (N)
white or blue
Ground wire
green
3. At the rear side of the LED fixture, please connect the Live (L)
and Neutral (N) terminal are used for connecting to power
output. Please follow the standard process to connect them
accordingly and do insulation on both terminal respectively.
Optical
Mechanical and Dimension
Electrical
Temperature Condition
Model No.
CCT (Typical)
GL-SP15-WW
(Warm White) GL-SP15CW
(Cool White)
GL-SP15S-WW /
GL-SP15C-WW
(Warm White)
GL-SP15S-CW /
GL-SP15C-CW
(Cool White)
Luminous Flux (lm)
Typical Luminous Efficacy
CRI (Ra)
Beam Angle
Net. Weight
Power Factor
Cover
3000 K
650 lm
33 lm / W 31 lm / W
> 80
30° / 60° (Optional)
6000 K
950 lm
48 lm / W 46 lm / W
> 75
Outline Dim. Ψ185 × 175 × 130 (mm) Ψ185 × 260 × 140 (mm) Ψ185 × 175 × 130 (mm) Ψ185 × 260 × 140 (mm)
Specifications GL-SP15 Series Outlook
All rights reserved. All brand names and trademarks are the properties of their respective owners.
The specifications are subject to change without notice.
17-SP15S000001
» GL-SP15
Sensor Style
Sensing Coverage
Detection Range
Light Up Time
Operating Hours
Protection Device
Image Pick-up Device Sony 1/3" color CCD
Gamma Characteristic
Lens Furnished
Video Output
S/N Ratio
Automatic infrared heat detector
4-15 meters. Center-horizontal moving
90° – 110°
7 seconds to 12 minutes
24 hrs
Inlaid with 220 V / 10A 5 x 20 mm fuse
Gain Control
Signal
Horizontal Resolution
0.45
Board lens 3.6 mm / 6 mm / 8 mm / f2.0
1 vp-p composite video / 75 ohms
More than 48 dB
Automatically
24H 1Vp-p video signal output
380TVL (optional 480TVL / 540TVL)
Sensor (optional)
CCD (optional)
Lux at 1 M (60°)
Lux at 1 M (30°)
373 450
1025
1.2 (Kgs)
20 W
> 0.9 for 115V AC; > 0.8 for 230V AC
100-240V AC
21 W 20 W 21 W
1.3 (Kgs) 1.2 (Kgs) 1.3 (Kgs)
1265
-20 °C －+40 °C
-40 °C －+85 °C
185.0 mm 130.0 mm
175.0 mm
185.0 mm 140.0 mm
260.0 mm
» Sensor - GL-SP15S
185.0 mm
260.0 mm
140.0 mm
» CCD (Optional) - GL-SP15C
Clear
Typical Power consumption
Input Voltage
Operating Temperature
Storage Temperature
Ø
m
SP-15W-CW 60°
m
1 m
2 m
3 m
4 m
5 m
0.58 m
1.16 m
1.73 m
2.3 m
2.89 m
450
lux
112.5
56.2
28.1
18
Ø
m
m
1 m
2 m
3 m
4 m
5 m
0.58 m
1.16 m
1.73 m
2.3 m
2.89 m
373
lux
93.3
46.4
23.3
14.9
Ø
m
m
1 m
2 m
3 m
4 m
5 m
1265
lux
316.3
164.7
79.1
50.6
0.27 m
0.54 m
0.8 m
1.07 m
1.34 m
Ø
m
m
1 m
2 m
3 m
4 m
5 m
1025
lux
256.3
130
64.1
41
0.27 m
0.54 m
0.8 m
1.07 m
1.34 m
SP-15W-WW 60° SP-15W-WW 30°
SP-15W-CW 30°
5050 (LUX)0
15°
30°
45°
60°
75°
90°
75°
60°
45°
30°
15°
0°
4030201010203040 150150 (LUX)0
15°
30°
45°
60°
75°
90°
75°
60°
45°
30°
15°
0°
120906030306090120
200200 (LUX)0
15°
30°
45°
60°
75°
90°
75°
60°
45°
30°
15°
0°
15010050501001506060 (LUX)0
15°
30°
45°
60°
75°
90°
75°
60°
45°
30°
15°
0°
40202040 503010103050
Candle Power Distribution Curve ( 15 W / 3 M)
IP55 IP65 (without sensor type)
This manual suits for next models
5
Other GlacialLight Lighting Equipment manuals
Popular Lighting Equipment manuals by other brands
Qazqa
Qazqa Suplux SL 3 Black 103062 instruction manual
Commercial Electric
Commercial Electric 54568141 Use and care guide
CREE LIGHTING
CREE LIGHTING 304 Series installation instructions
Goobay
Goobay 49867 user manual
ECOMAN ITALIA
ECOMAN ITALIA LED T8 instruction manual
Alkalite
Alkalite Krypton KT-81 user manual
