4. EARLY WARNING FEATURE
•Modes 1,6 have an “early warning” whereby one of the LEDs illuminates before the end of the
countdown. To activate this feature, press all 3 buttons simultaneously and wait for the time to flash.
(should take 5 seconds)
•When flashing, program the desired early warning time. (if setting seconds then you will hold down the
front button and the UP button simultaneously)
•When you have the desired “early warning” time, let the buttons go and wait for 3 seconds. The display
will flash to lets you know you have exited the “early warning” setting mode.
•Time is now ready to set the cycle time, or run a cycle.
5. OTHER NOTES
•Pressing both blue buttons resets display to zero time.
•Holding down blue buttons for a few seconds advances the time quickly.
•Modes 3,8,910, 11 do not apply to the battery version T4 as they involve relay output which is not
installed on the T4.
•The enclosure is completely waterproof and it is OK to hose it down.
2257 County Rd. 4, building #3, Stanley, NY 14561 585-301-0970
