Gill Regatta Race Timer W014 User manual
Regatta Race Timer_W014
Instruction Manual
This Regatta Race Timer comes with a 2 year warranty.
For warranty issues please contact your nearest stockist.
Proof of purchase required.
1.0 Introduction
Thank you for purchasing this timer.
The timer includes real time, daily alarm and a
regatta timer which times the starting of a race.
The timer is carefully designed and produced
for sailing use. In order to utilise the features on
your timer, it is advisable to read the following
notes before using for the first time:
- Avoid exposing the timer to extreme conditions
over extended periods.
- Avoid rough use and severe impacts.
- Occasionally clean your watch with a soft
moistened cloth to help maintain its lifespan.
- Store your watch in a dry place when not in use
for extended periods.
[S] [M]
[S/L/S]
[S/R]
ST./LAP/SYNC
SET MODE STP.
2.0 Buttons Operation Summary
Mode Button [M]
- In function modes: Press to enter the
next mode
- In any setting display: Press to choose
among different settings
ST./LAP/SYNC. Button [S/L/S]
- In Alarm Time Mode: Hold to test alarm
sound.
- In Chronograph Mode: Press to start or
select a lap time.
- In Timer Mode : Press to start or
syncronise.
- In setting displays: Press to increase the
value or hold to increase faster.
STP./RESET Button [S/R]
- In Alarm Time Mode: Press to select the
Alarm Time ON/OFF.
- In Chronograph Mode: Press to stop or
hold to reset the chronograph.
- In Timer Mode: Press to stop or hold to
reset the timer.
- In setting displays: Press to decrease the
settings or hold to decrease faster.
Set Button [S]
- In Real Time Mode, press and hold for about
2 seconds to enter the time setting display.
- In Function Mode, press and hold for about 2
seconds to enter the function setting display.
- In the function setting display, press to exit
and return to the function mode.
Note: The button operations are summarised
as above, for detailed operating instructions,
please continue reading.
[M]
[M]
[M]
3.0 Major Function Modes
Real Time Mode
Daily Alarm Mode Chronograph Mode
Timer Mode
[S]
[M]
[S/L/S]
[S/R]
4.0 Real Time Mode
Day of Week
Real Time
Date
How to set the Real Time
- To set the Real time, date, and other settings
press and hold the [S] button for about 2
seconds to enter the setting display (The
minutes digits will start flashing).
The Setting Sequence
- When the minute digit starts flashing, press
the [M] button to move the flashing digits
following the setting sequence of the diagram
in the next page.
- When the Minute, Hour, Year, Month, Day or
LCD level are flashing, press the [S/L/S] or
[S/R] buttons to adjust the value.
- When the Format is flashing, press the
[S/L/S] or [S/R] buttons to select the 12/24Hr
format or Date format.
- When the Chime/Keytone ON/OFF options are flashing, press the [S/L/S] or [S/R] buttons to
toggle it ON/OFF.
- When the setting is completed, press the [S] button once to exit the setting sequence. The
setting display will return to Real Time Mode automatically if there is NO key-stroke for about 1
minute.
[M]
[M]
[M]
[M]
[M]
[M]
[M]
[M]
[M]
[S]
4.1 Real Time Mode - Setting Sequence
ON / OFF
HOLD [S]
Minute
Hours
Format
Day
Keytone
LCD Level
MonthYear
[M]
[M]
[M]
[M]
[M]
[S]
[S]
[M]
[S/L/S]
[S/R]
How to set the Timer
- In Timer Mode, press and hold [S] button for 2s, the hour will be flashing, press the [S/L/S]
or [S/R] buttons to adjust the time you want. Press the [M] button to change the setting
items.
- When the Minute, Second digits are flashing, press the [S/L/S] or [S/R] buttons to adjust the
time.
- In SYNC setting, press the [S/L/S] or [S/R] buttons
to select between the SYNC Round and SYNC
Down. (Please refer to chapter 5.1 Timer Mode -
Countdown Timer for more details)
- When the Alert option is flashing, press the [S/L/S]
or [S/R] buttons to toggle it ON/OFF. (Please refer
to chapter 5.1 Timer Mode - Countdown Timer for
more details)
HOLD [S]
The time which the timer will countdown
from (Hour, minute and second).
5.0 Timer Mode
[S/R] [S/R]
[S/R] [S/R]
[S/R]
User Defined
5.1 Timer Mode - Countdown Timer
Countdown Timer
(Four Pre-set Values & One User-defined Value)
- This race timer has four pre-set values: 5.4.1.0, 5-Min, 3-Min and 1-Min and one user
defined value, Press the [S/R] button to change the display among them.
*Remark: Timer is stopped
User Defined
5.1 Timer Mode - Countdown Timer
Countdown Timer
(Four Pre-set Values & One User-defined Value)
- This race timer has four pre-set values: 5.4.1.0, 5-Min, 3-Min and 1-Min and one user
defined value, Press the [S/R] button to change the display among them.
*Remark: Timer is stopped
[S]
Multiples of Present Value
- After you have chosen one of the pre-set values, you also can mutliply those values by
pressing the [S] button.
For example: If pre-set timer is 3 Min, press [S] button once to double it to 6 Min, press [S]
button twice to triple it to 9 Min... and so on.
Key Lock Function (suspend buttons operation during counting)
- Whilst in Timer mode, press and hold [M]+[S] buttons at the same time to toggle the key lock
function ON/OFF. When key lock function is ON the symbol will be shown. Only the operation
of the [S/L/S] and [S/R] buttons will be locked in this mode.
Press [S/L/S] button to start, the countdown icon will start flashing.
5.2 Timer Mode - Countdown Timer
Table of contents
Other Gill Timer manuals
