Gigabyte GS27F User manual
GAMING MONITOR
GS SERIES USER GUIDE
GS27F / GS27Q / GS32Q
Copyright
© 2023 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved.
The trademarks mentioned in this manual are legally registered to their respective
owners.
Disclaimer
Information in this manual is protected by copyright laws and is the property of
GIGABYTE.
Changes to the specifications and features in this manual may be made by
GIGABYTE without prior notice.
No part of this manual may be reproduced, copied, translated, transmitted,
or published in any form or by any means without GIGABYTE’s prior written
permission.
• In order to assist in the use of this monitor, carefully read the User Guide
• For more information, check on our website at:
https://www.gigabyte.com
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade Dress
and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing
Administrator, Inc.
CONTENTS
INTRODUCTION..................................................4
Package Contents ...............................................4
Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
GETTINGSTARTED6
Installing the Stand Base ........................................6
Cable Management .............................................7
Adjusting the Viewing Angle.....................................8
Installing a Wall-Mount Bracket (Optional) ........................9
USINGTHEDEVICE 10
Turning the Power On/O ..................................... 10
Selecting the Input Source..................................... 11
OPERATIONS 11
Quick Menu ................................................... 11
Function Key Guide ........................................... 13
APPENDICES................................................... 22
Specications ................................................. 22
Supported Timing List ......................................... 23
Troubleshooting .............................................. 24
Basic Care..................................................... 24
GIGABYTE Service Information ................................. 24
SAFETYINFORMATION 25
Safety Precautions ............................................ 25
Stability Hazard Precautions ................................... 26
User Comfort Recommendations............................... 26
REGULATORYINFORMATION.................................... 27
- 4 -
INTRODUCTION
PackageContents
The following items come with your packaging box. If any of them is missing,
please contact your local dealer.
Note: Please keep the packaging box and packing materials for possible
transportation of the monitor.
Monitor
Quick Start Guide
Stand
Monitor Base
Warranty Card
DP Cable
(GS27Q/GS32Q)
HDMI Cable
(GS27F)
Power Cable
- 5 -
ProductOverview
FrontView
RearView
1Power LED 2Control button
1HDMI ports (x2) 3Headphone jack
2DisplayPort 4AC IN jack
1
2
DPHDMI-1 HDMI-2
43
12
HDMI-1 HDMI-2 DP AC
1
2
DPHDMI-1 HDMI-2
43
12
HDMI-1 HDMI-2 DP AC
- 6 -
GETTING STARTED
InstallingtheStandBase
1. Position the monitor face down on a flat surface with its protective foam
underneath and with its Styrofoam bag covered.
2. Fit the stand riser and stand base together with a coin, a screwdriver, or the
pull ring attached on the stand base.
3. Tear apart the Styrofoam bag. Fit the stand riser to the groove on the back of
the monitor. Push the stand until it snaps into place.
4. Take the monitor from the protective foam by holding its stand riser. Place it
upright on a table.
- 7 -
CableManagement
1. Take out the cable clip from the EPS.
2. Snap the cable clip into the stand, then pass the power cord and the cable
through the cable clip in the stand to connect them to the monitor.
- 8 -
AdjustingtheViewingAngle
1. Place one hand on the base to prevent the monitor from tipping over during
the adjustment.
2. Place the other hand on the top-center of the screen and apply forward or
backward pressure to adjust the angle to the desired viewing angle (-5° to 20°).
20°
5°
- 9 -
InstallingaWall-MountBracket(Optional)
Use only 100 x 100 mm compliant wall mount kit. Install the wall mount according
to the manufacturer’s instructions.
1. Position the monitor face down with its protective foam or with a nonabrasive
cloth underneath.
2. Align the wall-mount bracket installation holes with the screw holes on the
back of the monitor.
3. Use the screws to secure the bracket in place.
Note: To mount the monitor on the wall, refer to the installation guide that is
included in the wall-mount bracket kit.
100 mm
100 mm
HDMI-1HDMI-2 DP AC
100 mm
100 mm
HDMI-1HDMI-2 DP AC
- 10 -
USING THE DEVICE
TurningthePowerOn/Off
Make sure the power switch next to the AC power input jack is switched to ON.
PowerOn
1. Connect one end of the power cable to the AC IN jack at the rear of the monitor.
2. Connect other end of the power cable to a power outlet.
3. Press the Control button to turn on the monitor. The Power LED will light in
white, indicating the monitor is ready to use.
PowerOff
Press the Control button for 2 seconds to turn off the monitor.
Note: When the Main menu appears on the screen, you can also turn off the monitor
by moving the Control button down ( ). Refer to page 13.
Table of contents
Other Gigabyte Monitor manuals
Gigabyte
Gigabyte AORUS FI32Q X User manual
Gigabyte
Gigabyte G32QC User manual
Gigabyte
Gigabyte Aorus FI27Q User manual
Gigabyte
Gigabyte AORUS FI25F User manual
Gigabyte
Gigabyte M28U Arm Edition User manual
Gigabyte
Gigabyte G34WQC User manual
Gigabyte
Gigabyte AORUS FI32Q X User manual
Gigabyte
Gigabyte G27QC A User manual
Gigabyte
Gigabyte AORUS CV27Q User manual
Gigabyte
Gigabyte Aorus FI32U User manual
Gigabyte
Gigabyte Aorus FI32U User manual
Gigabyte
Gigabyte Aorus FI27Q-P User manual
Gigabyte
Gigabyte G27F2 User manual
Gigabyte
Gigabyte GS27Q X User manual
Gigabyte
Gigabyte GD-2018BP User manual
Gigabyte
Gigabyte G34WQC User manual
Gigabyte
Gigabyte M27QP User manual
Gigabyte
Gigabyte G24F2 User manual
Gigabyte
Gigabyte Aorus FI32U Installation instructions
Gigabyte
Gigabyte Aorus FI27Q User manual
