Giant NeosGPS User manual
NeosGPS
Operation Manual
Table of Contents
2 Table of Contents
Getting Started................... 3
NeosGPS Button
Introduction..................................... 3
Restart NeosGPS............................. 3
Accessories ....................................... 4
Status Icon ........................................ 4
Step 1: Charging your
NeosGPS............................................ 5
Step 2: Turn On NeosGPS............ 5
Step 3: Initial Settings................... 5
Step 4: Connecting to
Satellite Signal ................................ 6
Step 5: Start Riding With
NeosGPS............................................ 6
Step 6: Share Your Records ........ 6
Sync Records to the Giant
NeosTrack App................................ 7
Setup...................................... 10
Units of Measurement.................. 10
Time Display .................................... 10
Altitude Calibration....................... 11
Start Biking ....................................... 11
Enable GPS........................................ 12
Sensor Pairing ................................. 12
Delete Records................................ 13
Adjust Odometer ........................... 13
Giant NeosTrack App
Advanced Settings............ 14
Stopwatch Information ............... 14
Altitude Calibration....................... 15
Smart Notications ................ 16
Appendix.................................... 17
Specications ........................................17
Install NeosGPS.....................................18
Install Smart Speed/Cadence
Sensor (optional)..................................19
Install Smart Heart Rate Monitor
Belt (optional) ....................................... 20
Wheel Diameter and
Circumference....................................... 21
NeosGPS Basic Maintenance ...........22
Digital Information..............................23
Declaration of the Presence
Condition of the Restricted
Substances Marking ........................... 24
Warning
Consult your physician before starting any training.
Please read the "Warranty and Safety Information" guidelines included with your product.
3 Getting Started
Getting Started
This section explains the basic setup procedure before using your NeosGPS.
NeosGPS Button Introduction
Restart NeosGPS
Press and hold the ( / / ) keys to restart NeosGPS.
Power/OK ( )
• Press to turn on the device.
• Press and hold to turn the device off.
• Press to enter/leave the "Menu" page.
Change Page ( )
• Press this button to start recording in the
free biking mode.
• Press to stop recording when in the
exercise data logging mode.
• Press DOWN key to enter or validate
options in the "Menu" page.
Backlight/Page ( )
• Press and hold to turn the backlight
on/off.
• Press DOWN key to scroll down the
menu options in the "Menu" page.
• Press DOWN key to switch in
between the stopwatch pages in the
"Stopwatch" mode.
• Page Up/Down: Press to view biking
pages in the information mode.
4 Getting Started
Accessories
NeosGPS comes with the following accessories:
•
USB charging cable
Optional accessories include:
• GIANT HEART RATE SENSOR(410000075)
• RideSync/Garmin & Gopro Mount
for 31.8mm Round Bars (410000072)
• RideSync/Garmin & Gopro Mount for
Contact SLR Aero Handlebars (410000073)
• Bicycle mount
Status Icon
/
AM
PM
S
C
REC
Icon Instructions Icon Instructions Icon Instructions
Bike in Use Now
GPS Signal Status
Battery Charge Status
No Signal
(not positioned)
Poor Signal
Good Signal
Fully Charged
Battery Charge OK
Battery Charge Low
Bike 1
Bike 2
Daylight Saving
Time
Backlight
Slope
Total Ascending
Height
Total Descending
Height
Ride Time
Trip Time
Heart Rate Sensor
Paired
Speed Sensor Paired
Cadence Sensor
Paired
Riding Data
Recording
Bluetooth
Connected
Odometer
Maximum Value
Average Value
AM
PM
Choose 12 or 24
Hour Clock
Setup
Stopwatch Information
Accessory Pairing
Note:
• Accessory icons will display on the status bar when paired.
5 Getting Started
Step 1: Charging your NeosGPS
Remove the USB cable from the packaging and connect your NeosGPS to your computer for auto
charging. Please charge it for at least 4 hours. Remove the USB cable once it is fully charged.
fully charged.
• Charge your battery in a temperature range of 0°C-40°C (32°F - 105°F) or the charging will stop
and the device will consume battery power.
Step 2: Turn On NeosGPS
Press the button to power on your device.
Step 3: Initial Settings
complete the setup. (Please refer to page 10 for detailed settings)
1.Press to choose measurement units.
Charge NeosGPS
at least 4 Hours
6 Getting Started
Step 4: Connecting to Satellite Signal
Once the NeosGPS is powered on it will start searching for satellite signals automatically. It may take
30 to 60 seconds to receive satellite signals. Please acquire GPS positioning before using it for the
rst time.
The GPS signal icon ( / ) will display after the GPS is positioned successfully.
• If GPS positioning fails, the icon will display.
• DO NOT search for a GPS signal in the following environment as the latter may interfere with
signal reception.
Step 5: Start Riding With NeosGPS
• Easy Ride:
NeosGPS will detect the motion of your bike starting and stopping automatically.
• Start Riding and Record Data:
Press to start recording and press again to stop.
In Tunnels Indoor/Within
building/
Underground
Underwater High Voltage
Cables or TV
Tower
Construction
Site or in Trac
Jams
Step 6: Share Your Records
Share Your Records to the NeosTrack website
1.Register or log in.
a. Visit https://www.NeosTrack.com.
b. Register a new account.
2.Connect the device to a computer.
Power on the NeosGPS and connect it to your computer with a USB cable.
3.Share your records.
a. Click the "+" symbol in the upper right corner to add new activity entries.
b. Drag and drop FIT, BDX, or GPX les or click "Select le" to upload.
c. Click "Activity Log" to view just uploaded records.
7 Getting Started
Share Your Records to Strava.com
1. Register or log in to Strava.com.
a. Visit https://www.strava.com.
b. Register a new account or log in with your active Strava account.
2. Connect the device to a computer.
Power on the NeosGPS and connect it to your computer with a USB cable.
3. Share your records.
a. Click the "+" symbol in the upper right corner and click "File".
b. Click "Select File", then select the desired FIT les from the GIANT folder to upload them.
c. Input relevant riding information, click the "Save and View" key to upload them.
Sync Records to the Giant NeosTrack App
Start Using the Giant Mobile App
1. Download the Giant Mobile App.
Scan the QR Code at the bottom of the page to download the Giant NeosTrack APP or search for
and download it in the Google Play/App Store.
2. Register with the Giant NeosTrack APP.
a. Open the Giant NeosTrack APP.
b. Register a new account.
Note: Sync the Giant NeosTrack APP with NeosTrack.com. Please log in NeosTrack.com with
your existing account, otherwise create a new one.
Bluetooth Sync
8 Getting Started
Bluetooth Pairing With the Giant NeosTrack App
NeosGPS can sync wirelessly with a Bluetooth connection. Please pair NeosGPS with the NeosTrack
App before any sync to enable correct records synchronization.
One-click Record Upload
After the device is successfully paired with the Giant NeosTrack App and the Bluetooth connection
remains active, you may click to auto upload all records to the Giant NeosTrack App.
a. Enable the "Bluetooth" function
of your cell phone.
b. Press the Power key to enable
NeosGPS.
c. Click "Bluetooth Sync" to
maintain the networking function.
d. Select MySetup > Device
Manager >and Press the "+" key.
e. Select Bluetooth 4.0. f-1. Select the NeosGPS for pairing +.
f-2. Press "OK".
f-3. Your device has successfully
paired with the Giant NeosTrack
App, tap to complete.
g. Start uploading records from
the paired device.
h. All records uploaded. i. Go to the "Activity Log" to see
uploaded records.
9 Getting Started
Software Updates
Note: NeosGPS software features regular updates for quicker GPS positioning and optimization. It is
recommenced that you check for new updates every two to four weeks.
1. Check this website to see if there is a newer version.
www.giant-bicycles.com/download
2. Connect to the USB port of a computer, save les in NeosGPS folder.
3. Unplug the USB cable once the operation is completed and the NeosGPS will start updating
automatically.
Identify Whether Your NeosGPS is the Latest
Version
1. Connect the NeosGPS to computer with a USB cable.
2. Click System -> Device to view the edition of the current model and release.
You may customize the following functions with the "Setup" function: unit of measure, daylight
saving time, current altitude, bike, wheel diameter, sensor pairing and odometer.
Unit of Measure
You may choose KM/H or MI/H for UOM display.
1. Press to enter the UNIT setup page.
2. Press -> and
3. Press to validate the selection made.
4. Press to exit setup.
1. Press to enter the setup page.
2. Press to select HOUR, press and the HOUR
setup page will display.
3. Press to select 12h or 24h, press to validate the
selection made.
4. The daylight saving time page of the NeosGPS
display, press to select the desired number, press
to validate the selection made and proceed to the
next one. Repeat the above steps to complete the
setting. Press to return to the main setup page if
no changes are required and press again to exit.
5. Once all settings have been made, press to
validate the selections made and exit back to
the main setup page and press to exit.
Setup
10 Setup
- or 0
1 or 2
00 or 30
Select
Number
Time Display
You may select 12 or 24 hour time format and set up daylight saving time here.
Table of contents
Other Giant GPS manuals
