GeoVision SQP110 Series User manual
SQP110 Series
User’s Manual V1.0.3
i
WARRANTY
The products are warranted against defects in workmanship and material for a period of one
(1) year from the date of purchase provided no modifications are made to it and it is operated
under normal conditions and in compliance with the instruction manual.
The warranty does not apply to:
· Product that has been installed incorrectly, this specifically includes but is not limited to
cases where electrical short circuit is caused.
· Product that has been altered or repaired except by the manufacturer (or with the
manufacturer’s consent).
· Product that has subjected to misuse, accidents, abuse, negligence or unusual stress
whether physical or electrical.
· Ordinary wear and tear.
Except for the above express warranties, the manufacturer disclaims all warranties on
products furnished hereunder, including all implied warranties of merchantability and fitness
for a particular application or purpose. The stated express warranties are in lieu of all
obligations or liabilities on the part of the manufacturer for damages, including but not limited
to special, indirect consequential damages arising out of or in connection with the use of or
performance of the products.
CAUTION
Whilst care has been taken to provide as much detail as possible for use of this product it
cannot be relied upon as an exhaustive source of information. This product is for use by
suitably qualified persons who understand the nature of the work they are doing and are able
to take suitable precautions and design and produce a product that is safe and meets
regulatory requirements.
SAFETY INSTRUCTION
Do not use this product near water, for example, near a bathtub, wash bowl, kitchen sink,
laundry tub, in a wet basement or near a swimming pool.
ii
LIMITATION OF LIABILITY
The manufacturer’s liability for damages to customer or others resulting from the use of any
product supplied
hereunder shall in no event exceed the purchase price of said product.
TRADEMARKS
The following are trademarks of GeoVision, Inc.:
· SQP Series
· PN300
CompactFlash is a registered trademark of SanDisk Corporation.
Other brands and products are trademarks of their respective holder/s.
CONTACT DETAILS
GeoVision, Inc.
9F, No. 246, Sec. 1, Neihu Rd.,
Neihu District, Taipei, Taiwan
Tel: +886-2-8797-8377
Fax: +886-2-8797-8335
http://www.geovision.com.tw
Specifications are subject to change without notice
iii
Contents
Note.......................................................................................................... v
Chapter 1 Introduction ...........................................................................1
1.1 Features..................................................................................................................1
1.2 Packing List ............................................................................................................2
1.3 Optional Accessory .................................................................................................2
1.4 Overview .................................................................................................................3
1.4.1 The Right Panel.............................................................................................3
1.4.2 The Left Panel ...............................................................................................4
1.5 The IR Remote Control ...........................................................................................5
Chapter 2 Getting Started ......................................................................7
2.1 Turning on the Power..............................................................................................7
2.2 The Main Screen of the Touch Screen Model.........................................................8
2.3 Playing the Slideshow.............................................................................................9
Chapter 3 System Setup......................................................................10
3.1 Setting the System Preferences ........................................................................... 11
3.2 Setting the Display Effect......................................................................................12
3.3 Setting the Network...............................................................................................13
3.4 Setting the Clock and the Display Schedule .........................................................14
3.5 Copying Files from the USB Storage Device ........................................................15
3.6 Upgrading the Firmware .......................................................................................16
3.7 Customizing the Initial Screen ..............................................................................17
Chapter 4 Clip Design..........................................................................18
4.1 Installing the Clip Design ......................................................................................19
4.2 The Main Screen...................................................................................................20
4.3 Creating an Interactive Slideshow ........................................................................22
4.3.1 Creating a New Page ..................................................................................22
4.3.2 Jumping from One Page to a Specific Page................................................24
4.3.3 Generating an Inset Window on a Page......................................................28
4.3.4 Inserting a Video on a Page ........................................................................30
4.3.5 Generating a QR Code on a Page ..............................................................32
4.3.6 Creating a Ticker on a Page........................................................................34
4.3.7 Verifying the Slideshow with the Flowchart .................................................36
4.4 Playing the Interactive Slideshow on SQP110 Series ..........................................37
iv
4.5 Customizing the Screen Saver for SQP110 Series ..............................................38
Chapter 5 Content Schedule ...............................................................40
5.1 Installing the Schedule..........................................................................................40
5.2 Setting the Content Schedule ...............................................................................41
Chapter 6 CMS Lite .............................................................................48
6.1 Additional System Requirements..........................................................................49
6.2 Installing the CMS Lite ..........................................................................................51
6.3 Connecting SQP110 Series to the CMS ...............................................................52
6.4 The Main Screen...................................................................................................54
6.5 Uploading Video and Image Files .........................................................................56
6.6 Uploading Interactive Slideshows .........................................................................57
6.7 Uploading the Schedule........................................................................................58
6.8 Uploading the Firmware........................................................................................59
6.9 Changing the Device Name ..................................................................................60
Specifications .........................................................................................61
Appendix ................................................................................................62
A. Playing the Demonstration Examples in Software CD......................................62
B. Definitions of Folder Names.............................................................................64
v
Note
The demonstration examples included in the Software CD are created by the Clip Design
software. You can store and play these examples on the SQP110 series before you start to
create your own slideshows. For details, see Appendix A. Playing the Demonstration
Examples in Software CD.
1
Chapter 1 Introduction
SQP110 series (Square Plastic 110 series) is a dynamic digital signage with an 11-inch
monitor. It is designed to display slideshows made of images and videos. SQP110 series can
be used for any application that requires showing information and messages, such as
advertising.
SQP110 series comes in two models, SQP110T with a touch screen and SQP110P with a
non-touch screen. With the touch screen, users can interactively access the information
displayed on the screen. The device is available in black or white color.
SQP110 series is built in a SD card slot and a USB port. The SD card slot is for connection to
the SD card that stores the slideshow files, and the USB port is for connection to the USB
storage device, which is used for firmware upgrade or files transfer to the SD card.
SQP110 series support content management system CMS Lite for remote slideshows and
firmware upgrade. An additional USB to RJ-45 cable is required to allow the SQP 110 series
connect to the network.
1.1 Features
•11-inch touch / non-touch panel (800 × 480 ;16 :10)
•Multimedia support
•SD card and USB storage
•Content Schedule
•Content Management System
•Automatic slideshow display with multiple transition effects
•IR remote control
•Built-in speakers
2
1.2 Packing List
1. SQP110 device × 1
2. AC/DC adapter × 1
3. IR remote control × 1
4. Software CD × 1
5. Magnetic rear rack × 1
1.3 Optional Accessory
USB to RJ-45 Cable
Introduction
3
1
1.4 Overview
This section identifies the components of the SQP110 series.
1.4.1 The Right Panel
Figure 1-1
No. Name Function
1 UP Navigate the OSD menu to go up.
2 RIGHT Navigate the OSD menu to go right.
3 ENTER Enter the OSD menu or select a desired item from the menu.
4 LEFT Navigate the OSD menu to go left.
5 DOWN Navigate the OSD menu to go down.
6 MENU
Display the initial screen, or display the first page of the
slideshow when the storage device that contains the
Scenario folder is connected.
7 STAND BY
Turn into the Standby mode. In the standby mode, the screen
turns off to save the power consumption. Press the key again
to return to the ON mode.
8 OFF-ON Turn on and off the device.
9 DC 12V Connect the supplied power adaptor.
4
1.4.2 The Left Panel
Figure 1-2
No. Name Function
1 IR Built-in IR receiver to receive the IR signals from the IR
remote control.
2 LED Indicators
The green LED indicates the power is supplied.
The red LED indicates the USB port or the SD card slot is
used.
3 USB
1. Connect the USB storage device for firmware upgrade
and file transfer. See 3.1 Setting the System
Preferences, and 3.6 Upgrading the Firmware.
2. Optionally connect a USB to RJ-45 cable to have
network access.
4 SD Connect the SD memory card for local storage.
See 2.3 Playing the Slideshow.
5 USB 1 (Reserved)
Other manuals for SQP110 Series
1
Table of contents
Other GeoVision Monitor manuals
