Genius LOOK 310S User manual

English

-1-

Symbol for Separate Collection in European Countries

This symbol indicates that this product is to be

collected separately.

The following apply only to users in European

countries:

zThis product is designated for separate collection

at an appropriate collection point. Do not dispose

of as household waste.

zFor more information, contact the retailer or the local authorities in

charge of waste management.

1. SnapShot Button You can take real-time images by simply

clipping on the snapshot button.

2. LED Indicator When the Look 310S is successfully

connected to the PC, the LED indicator will

light up.

Look 310S Features

English

-2-

3. Fixed LENS You don’t have to adjust the focus. The

effective image distance is from 60cm to

300cm.

4. Support Neck

The support neck can be pulled upwards and

pushed downwards to adjust the length.

The support neck can be moved forward and

backward to adjust the position.

5. Clipping base You can adjust the clipping base by turning

the body clockwise or counterclockwise.

The Look 310S is designed for standing on a desk or clipping on a

laptop or flat panel monitor.

Please kindly note that the supporting neck has 2 sections.

To use the clipping base properly, please follow the steps as below

to take good use of elegant design of the clipping base.

Step

Hold the black ring and

pull the top portion of the

web cam upwards.

Step 2 Hold the black ring and

turn the body clockwise

to open the base.

Look 310S Special Clipping Base Design

Black Ring

English

-3-

Step

Position the Look

310S/Look 310S on the

top or side of your laptop

or flat panel

Step

Use a finger to adjust

the width of the base so

it fits on your laptop or

flat panel.

Step

5 Now, you can adjust to

the web cam position you

want.

Step

6 You can adjust the web

cam position at any

time.

Step

When you finish the

hardware installation, go

to the next section to start

the software installation.

1. Please install the driver first and then connect Look 310S to

the USB port.

2. Installing the Look 310S driver

Installing the Look 310S

English

-4-

Windows Environment

a. Insert the Look 310S Installation CD into the CD-ROM

drive.

a. The Autorun screen will bring up the installation screen. Click on

“Driver” then simply follow the on-screen instructions.

b. Install DirectX from the CD.

Notice: If the Autorun screen doesn’t start, please follow the

steps:

zClick on “Start Menu”

zType D：\SETUP.EXE , then click Enter key.

(Assume your CD-ROM is in Drive D)

Mac Environment

a. Insert the Look 310S Installation CD into the CD-ROM drive.

b. Double click on the CD-ROM drive.

c. Click on the file folder of “Look 310S Driver OSX 1.0”.

d. Click on “Look 310S Driver Install” then simply follow the

on-screen instructions.

e. Restart the computer

3. Insert the Look 310S’s USB cable to your desktop’s or

laptop’s USB port.

4. Complete software and hardware installation. You can

install the software you would like to use for video

conferencing or chat with your friends.

English

-5-

NOTE

To remove the driver installation,

Windows Environment:

Please go to the taskbar and follow “Start ÆProgram ÆLook 310S

ÆClick “Uninstall”, then follow the on-screen instructions to remove the

driver.

Mac OS X Environment:

Please go to the HDD of the operation systemÆ“Application”Æ“Look

310S”ÆClick “Uninstall”, then follow the on-screen instructions to remove

the driver.

You can use our software to capture the real-time image, record or

execute the simply security function.

To run the software, please go to the task bar and follow “Start”Æ

Click “Program”ÆChoose “Look 310S”ÆClick “Look 310S”. Or you

may execute the software by simply clicking the shortcut of “Look

310S”.

NOTE

After installing the driver of Look 310S, the system will automatically create a

file (C:\WINDOWS\Album or C:\WINNT\Album)to save the images you take

using the Genius Application.

Genius Application (Windows Only)

English

-6-

1. Description for the major icon

Preview mode

Snapshot mode

Video Clip Mode

Security monitoring system

Exit the Genius UI

Camera Control

NOTE

In the “camera control section”, you can personalize your camera

settings for different circumstances.

English

-7-

1-You can flip the image horizontally or vertically by choosing “Image Mirror” or

“Image Flip”.

-When the light is not sufficient, you may click on “Low Light” to get a clear

image.

2You can adjust different values for different circumstances and environment

3When you want a still image capture, you can drag the bar to select a resolution

size you want.

-VGA: 640 x 480;

-SVGA: 800 x 600

-XGA: 1024 x 768

-SXGA1280 x 960

4You may adjust values toward image appearance. Before adjusting values, you

have to unclick “Auto” to unlock.

5-Press “Reset” to return to the manufacturer’s settings.

-Press “Restore” to return to the previous settings.

-Press “Save” to save the values you set up.

English

-8-

6Select the correct frequency according to the country where you are using the

web camera. (Before doing this, you will need to select “Indoor”.)

7-If your web camera is located in backlight position, you may click “Backlight

compensation” to get a sharper image.

-You can have a black-and-white photo effect by clicking on “B/W Mode”.

English

-9-

1There will be 27 different kinds of video effects/frames for you to select. The

effects can also be applied to the video chat software, like MSN Messenger.

You can directly connect to this effect page from the web camera settings in the

video chat software.

2Besides the 27 kinds of video effects/frames in section 1, you also can bring in

your customized frame. Please note that, in the customized frame, you must have

the color in Pantone 255 in the area, where you want your image show up.

English

-10-

3Auto Change: Once you choose this, the 27 kinds of video effects will take turns

from the first one to the last one.

No effects & frame: Once you choose this, the video effects will be determinate.

In this section, you can enable the “Zoom” function. Please select

“Enable Zoom” before zooming.

-Scroll the bar to zoom in or zoom out

-Press the 4-direction button to move the image upward, downward,

leftward, and rightward.

Table of contents

Other Genius Webcam manuals

Genius

Genius ISLIM 320 User manual

Genius

Genius EYE 312S User manual

Genius

Genius FaceCam 1020 User manual

Genius

Genius VIDEOCAM EXPRESSII User manual

Genius

Genius FaceCam 322 User manual

Genius

Genius FaceCam 1000 User manual

Genius

Genius EYE 312 User manual

Genius

Genius I-LOOK 1321 User manual

Genius

Genius MESSENGER 310 User manual

Genius

Genius LOOK 1320 User manual

Genius

Genius SLIM 1320 User manual

Genius

Genius FACECAM310 User manual

Genius

Genius TREK 320R User manual

Genius

Genius EFACE 1300 User manual

Genius

Genius ISLIM 2000AF User manual

Genius

Genius EYE 320 User manual

Genius

Genius VideoCAM NB 300 User manual

Genius

Genius SLIM 2020AF User manual

Genius

Genius LOOK 1320 - V2 User manual

Genius

Genius VIDEOCAM MESSENGER User manual

Genius

Genius NB - QUICK User manual

Genius

Genius LOOK 110 User manual

Genius

Genius VideoCAM NB 300 Instruction Manual

Genius

Genius SLIM 322 User manual

Popular Webcam manuals by other brands

Digitus

Digitus DA-70815 user manual

Logitech

Logitech C510 user manual

D-Link

D-Link DCS-5025L user manual

BTC

BTC PC160S installation guide

Philips

Philips SPC715NC Specifications

Trust

Trust 12440 user manual

FS FC270S user manual

Adesso

Adesso CyberTrack V10 user manual

MAGINON

MAGINON M-Cam 1 manual

RoboCam

RoboCam SPARK Quick setup guide

Logitech

Logitech C170 Getting started guide

Real-El

Real-El FC-225 user manual

Logitech

Logitech TV Cam Setup guide

Gigaware

Gigaware 25-1176 user guide

birddog

birddog EYES P200 user guide

Dicota

Dicota Contact user guide

Afidus

Afidus ATL-200 Quick installation guide

Connectland

Connectland CAM-CNL-C119 user manual