Genius DX-ECO User manual

English

1

Hardware Installation

Note: Supports Windows 7/Vista/XP

1. Connect the Micro USB charging cable to the mouse and any PC USB port.

2. You can connect the receiver to a USB port of a PC.

. In charging mode, the RED LED light will be on and off when charged.

4. Make sure that you have switched on the power switch underneath the mouse.

Remark:

It takes around five minutes to charge up the capacitor and you can use the mouse for about

four hours. Actual performance varies according to the conditions.

Software Installation

1. Place CD into CD/DVD-Rom drive.

2. Follow the instruction on the screen to complete software setup.

. Restart your PC.

Factory Settings

1. Previous Page: Go to last page of Internet Explorer

2. Next Page: Go to next page of Internet Explorer

. Left Button: Provides traditional mouse functions like click, double click and drag.

4. Magic Roller: Press the “Magic-Roller” to surf the Internet and Windows documents.

5. Right Button: Provides traditional mouse click functions.

6. DPI adjustment: Default is 1600 dpi, press once for 800 dpi. Quick red flashing is 1600 dpi

and slow red flashing is 800 dpi.

7. Flying Scroll: Press and hold to move vertically or horizontally for 4-way scrolling.

English

2

Capacitor low indication

If the LED is flashing, then the capacitor level is low, you need to recharge the mouse

immediately.

Warning: (Troubleshooting)

1. Do not use the wireless optical/laser mouse on a desk which is made of glass or mirror.

2. The connection of the wireless device is factory preset, so when you plug the USB

receiver into any USB port, the connection between the micro receiver and the mouse will

be established automatically.

. In case your PC did not install the hardware successfully, remove the micro receiver from

the USB port and go Human Interface Devices under Device Manager to remove the

mouse then plug in the micro receiver to a USB port again.

4. If you feel the mouse does not move smooth as usual, it is possible the batteries have lost

their charge so you need to replace them. Remember to put the batteries in the correct

direction.

5. Keep the mouse away from heat in order to prevent damage to the capacitor.

Table of contents

Other Genius Mouse manuals

Genius

Genius Navigator 900G User manual

Genius

Genius ERGO 3000 - User manual

Genius

Genius NAVIGATOR 700 User manual

Genius

Genius ERGO 720 LASER User manual

Genius

Genius NAVIGATOR 900G LASER User manual

Genius

Genius X-G300 User manual

Genius

Genius ERGO R815 User manual

Genius

Genius Ergo 9000 User manual

Genius

Genius NetScroII Optical User manual

Genius

Genius ERGO 520 User manual

Genius

Genius MT900BT Manual

Genius

Genius SCROLLTOO 800 User manual

Genius

Genius Ergo 8200S User manual

Genius

Genius TRAVELER T925 LASER User manual

Genius

Genius NAVIGATOR 805 Assembly Instructions

Genius

Genius NAVIGATOR 365 LASER User manual

Genius

Genius NAVIGATOR 900 PRO User manual

Genius

Genius Traveler 9020BT User manual

Genius

Genius TRAVELER 350 User manual

Genius

Genius TRAVELER 900 User manual

Genius

Genius TRAVELER P330 User manual

Genius

Genius MicroTraveler 900S User manual

Genius

Genius NX-8006S User manual

Genius

Genius X-G510 User manual

Popular Mouse manuals by other brands

Sven

Sven RX-G720 user manual

3DConnexion

3DConnexion CadMouse Pro manual

Canyon

Canyon Puncher GM-20 manual

Sharkoon

Sharkoon Light2 180 manual

Cherry

Cherry MW 8C ERGO user manual

NGS

NGS HIT RB manual

Sharkoon

Sharkoon FireGlider manual 

Lenovo

Lenovo Wireless Mouse N3902 quick start guide

BASETech

BASETech BN-S11 operating instructions

Dell

Dell WM326 user guide

Areson

Areson B213 user guide

HP

HP M17587-371 manual

Chatpen

Chatpen CHA-30 user manual

GAMDIAS

GAMDIAS DEMETER GMS5000 Quick installation guide

HP

HP KJ453AA - Wireless Laser Mouse datasheet

Trust

Trust GRAPHIN GXT 960 user guide

Lenovo

Lenovo SD-9082 Product guide

Alienware

Alienware AW320M user guide