Genio PRO S User manual
2
IMPORTANT SAFETY AND INSTALLATION INSTRUCTIONS
INFORMATION RELATING TO POSSIBLE PERSONAL INJURY, ELECTRIC SHOCK
AND FIRE HAZARD HAS BEEN INCLUDED IN THIS LIST.
WARNING - When using electric l products, b sic prec utions should lw ys be followed,
including the following:
1. Read all instructions before using the product.
2. The product should be connected to a power supply only of the type described in the
operating instructions or as marked on the product.
3. Do not open the cover under any circumstances.
4. Power is supplied through a polarised line plug (one wide blade). Connect only to an
outlet designed for a polarised plug.
5. Keep the power cord away from other objects. Make sure that the cord is not twisted,
placed in any lane of traffic, or a trapped under the piano.
6. Place your Genio PRO S away from direct sunlight, water or moisture, or hot or cold
air currents.
7. The power-supply cord of the product should be unplugged from the outlet when left
unused for a long period of time.
8. If repair service is necessary, refer only to authorised service personnel.
9. This product, either alone or in combination with an amplifier and headphones or
speakers, may be capable of producing sound levels that could cause permanent
hearing loss. Do not operate for a long period of time at a high volume level or at a
level that is uncomfortable. If you experience any hearing loss or ringing in the ears,
you should consult an audiologist.
The product should be placed at a location or position that does not interfere with its
proper ventilation.
Care should be taken so that objects do not fall and liquids are not spilled into the
enclosure through openings.
The product should be serviced by qualified service personnel when:
a) The power supply cord or the plug has been damaged; or
b) Object has fallen, or liquid has been spilled onto the product; or
c) The product has been exposed to rain; or
d) The product does not appear to operate normally or exhibits a marked change in
performance; or
e) The product has been dropped, or the enclosure damaged.
10.
11.
12.
3
We greatly appreciate your purchase of the Genio PRO S. The Genio PRO S allows you
to enjoy your new piano any time you want without disturbing others. With the mute lever
in the release position, your Genio PRO S functions as a quality upright acoustic piano
with the added benefit of audio and MIDI output signals.
With the mute lever in the Mute position, the piano’s acoustic sound is silenced and
headphones can be used to hear the audio signal privately.
Before playing your new Genio PRO S, we suggest reading this user’s guide thoroughly
to become acquainted with its capabilities and functions.
Connection Diagram of the Genio PRO S
A. Mute Mechanism
B. Sound Generation
Main Unit
A. Front Panel
B. Rear Panel
Operations
A. How to play your Genio PRO S in Silent
B. How to play the piano with acoustic sounds.
C. How to play the acoustic piano with the Genio PRO S
How to try out various contained sounds on the panel
A. Sound Select
B. Howe to edit User-Set
C. How to change the name of User-Set
D. Description of the parameter of the User s Edit mode
How to select one of the 128GM Sounds
A. How to change the touch response of the keyboard
B. Transpose
C. How to change the effects
Table of contents
5
6-7
8-9
10-15
16-17
4
Metronome
How to play along with Metronome operation
Pitch
How to set the Pitch
Effect
How to set the reverb effect on the front panel
Record and Play
A. Record
B. Play
Demo and Educational accompaniment song
A. Demo 1
B. Demo 2 (Educational Mode)
Initializing of the Genio PRO S
How to adjust the sensitivity of the Genio PRO S
Application
A. Connecting your Genio PRO S to external Audio Equipment
B. Connecting your Genio PRO S to external MIDI Equipment
Troubling shooting
GM Program Chart
Drum Chart
MIDI Implementation Chart
Chart for User-Set Editing
Specification
18-19
20
20
21-22
23-25
26
27
28-29
30
31
32
33
34
35
5
Connection Diagram of the Genio PRO S
Connection Diagram
A. Mute Mechanism
Hammer Shank Stop Rail (Mute Rail)
In the mute position, Mute Rail protects the hammer shank just before hitting the string.
Mute rail is fixed to the action of the piano instead of damper stop rail.
Mute Lever
By simple operation of mute lever, user can change the piano mode between traditional
acoustic piano and Genio PRO S in silent.
B. Generation MIDI Signal and Sounds
Main Control Unit
All the electronic device hooking up with this main control unit and controls sound generation
and multi function of the system.
Key Sensor rail
Key Sensor rail is placed beneath of the keyboard and detects the key moving data to generate
MIDI signal by scanning program of the main control unit.
Pedal sensor
Pedal sensor detects the pedal moving data to simulate sound effect of the real pedal working.
AC Adaptor (Power supply)
AC adaptor supplies required power to the Genio PRO S system.
Headphones
Headphones provide private sound when your performance in silent.
Main Control Unit
6
A. Front Panel
1. Power
2. LED indicator
3. LCD display
4. Tempo
Metronome
5. Measure
Pitch
6. Song
Effect
7. Track
Sound
8. 2. Left-Track-1. Right
▼
Value
▲
9. Next/Cancel Start/Stop
Record Play
10. Volume
11. Headphone Jacks
Press to turn the Genio PRO S on press again to turn it off
Flashes according to the metronome beat with read when down beat,
green when up beat.
Shows the currently selected parameter with its dynamic or value.
Shows the currently selected song and measure when education mode.
Play mode : Press to turn the metronome on;press again to turn it off
Demo mode : Press to set the tempo value of the selected demo song.
Play mode : Press to set the reference pitch
Demo mode : Press to set start and end measure of the selected song to play
Play mode : Press to set the reverb effect by using Demo mode :Press to set
the song
Play mode : To select one of 16 pre-set and 16 user-set sounds, press either
[▼] Value or [▲] button
Demo mode : To turn the Track 1(Right hand) and Track 2(Left hand) and
track for accompaniment ON and OFF by pressing either [▼]
Value or [▲] button
Play mode : Press either [▼] Value or [▲] button to set the value to the
selected parameter.
Demo mode : To turn the Track 1(Right hand) and Track 2 (Left hand) and
track for accompaniment ON and OFF by pressing either [▼]
Value or [▲] button
Play mode : Control record and play function of the recorder
Demo mode : To change the function or mode, press either [▼] Value or [▲]
button
Volume control Knob
Connect the Stereo Headphones through those jacks
7
B. Rear Panel
1. Audio INPUT/OUTPUT: Stereo audio connections to external audio equipment.
2. MIDI INPUT/OUTPUT: MIDI connections to external MIDI equipment or computer.
3. KEYBOARD: Detected key moving data connects to the main control unit by using signal cable
through this jack.
4. AC power adaptor (power supply) plugs in here.
Operations
8
Sophisticated technology in your Genio PRO S allows you to play it like an acoustic
piano or, when desired silently. When Genio PRO S is playing, only you can hear your
performance through headphones.
A. How to play the Genio PRO S in Silent
A. Make sure that the AC power adaptor is connected to the Genio PRO S and plugged
into an outlet.
B. Pull the mute lever which is in located under the right side of the keyboard to play
the piano in silent.
1) Press the [Power] button to turn the Genio PRO S on
2) Put the headphones on and plug into either headphone jack on the right side.
Indicator may change the color from green to red when plugs the Headphones into the Jack.
3) Adjust the volume as desired.
4) Piano 1 is default sound. If desired, select another sound instead by pressing either [▼] Value
or [▲] button
5) Enjoy your performance without disturbing other people.
Indicator may change the color from green to red when plugs the headphones into the jack
Note: After turning on the Genio PRO S, a few seconds of operation are required before the unit is
ready to play.
Mute
Release
Mute Lever
9
B. How to play the piano with acoustic sounds
1) Release mute lever
2) Play the Piano
C. How to play the acoustic piano with the Genio PRO S
In order to play the acoustic piano with the Genio PRO S together, the Genio PRO S
should be connected to the amplifier system to amplify the sound of the Genio PRO S.
1) Release the muter lever
2) Press the [Power] button to turn the Genio PRO S on.
3) Adjust the Genio PRO S and amplifier sound volume to blend the sound properly.
4) Enjoy your performance by choosing desired sounds.
Mute
Release
(Acoustic)
Mute Lever
Mute
Release
(Acoustic)
Mute Lever
+
10
The Genio PRO S contains 16 pre-set and 16 user-set program that can be selected by
pressing either [
▼
] Value or [
▲
] button on the panel. And by using the [Sound]button+
pressing the keys, you may select one of 128 sounds contained.
A. Sound select
When the Genio PRO S on and press the [Sound] button then the Genio PRO S would be sound
mode. In this mode, user can change and choose one of the contained 32sounds the sounds by
pressing either [▼] Value or [▲] button
1) Pressing the Value[▲] button, then pre-set number increase and moves from the end of pre-set to
the first of the user-set
2) Pressing the Value [▼]button, then user-set number decrease and moves from first of the user-set
to the end of the pre-set.
P2 Piano 2
How to try out various contained sounds on the panel
Table of contents
