Genie IntelliG User instructions

Programming

Quick Reference Card

For detailed instructions refer to owner’s manual. 800-35-GENIE.

WARNING: DO NOT use wall console until limits have been set.

WARNING: Bullet MUST be engaged to carriage BEFORE setting limits.

Setting Limits & Remote Programming

for IntelliG®, TriloG™& GPower™Models

PROGRAM

SET

PROGRAM

SET – +

HOLD

2 seconds

HOLD

2 seconds

2Press and hold the down arrow button (-) for

2 seconds until the long LED comes on blue

(round LED remains off).

PROGRAM

SET – +

3Release down arrow button (-) and the long LED

will begin ﬂashing.

PROGRAM

SET – +

PROGRAM

SET – +

HOLD

4Press and hold the down arrow button (-) until

garage door is fully closed on ﬂoor, then release.

PROGRAM

SET

PROGRAM

SET – +

5Press and release the Program Set button (both

LEDs ﬂash blue and go off).

The down limit is now set.

Setting Down Limits: Setting Up Limits:

PROGRAM

SET

PROGRAM

SET – +

HOLD

2 seconds

HOLD

2 seconds

6Press and hold the up arrow button (+) for

2 seconds until the long LED light comes on blue

(round LED remains off).

PROGRAM

SET – +

7Release up arrow button (+) and the round LED

will begin ﬂashing.

The up limit is now set.

PROGRAM

SET

PROGRAM

SET – +

9Press and release the Program Set button (both

LEDs ﬂash blue and go off).

PROGRAM

SET – +

PROGRAM

SET – +

HOLD

8Press and hold the up arrow button (+) until door

is fully open, then release. Watch carriage as

it approaches the power head to avoid contact

with powerhead.

*If both LEDs turn RED at this time,

return to Step 1, Setting Down Limits.

P999-159 1M 1/13 JAR

Press and release the same button on the remote

(the door should open or close).

To clear remote memory completely from the power head -

Press the Program Set button on the power head and hold for

2 seconds. The round LED will come on. Release the Program

Set button and the round LED goes off. The long LED now

ﬂashes purple. Press the up arrow button and down arrow

button simultaneously on the power head and hold until both

LEDs ﬂash blue and go off.

Force and speed are set.

10 Open and close your garage door using the Wall

Console Open/Close button.

PROGRAM

SET – +

Release the

ProgramSetbutton

(the long LED

begins ﬂashing purple).

PULL

Remove protective ﬁlm for battery from remote.

PROGRAM

SET – +

Press and release the button you have chosen

on the Remote (long LED comes on purple).

PROGRAM

SET –

PROGRAM

SET –

Press and release the same button on the remote

(both LED’s ﬂash blue and then turn off).

Setting Force & Speed:

PROGRAM

SET – +

HOLD

2seconds

Press and hold the Program Set button (the round

LED turns blue).

Programming Remotes:

This manual suits for next models

Table of contents

Other Genie Garage Door Opener manuals

Popular Garage Door Opener manuals by other brands

Dorma

Dorma ES 90 manual

Garaga

Garaga SECURITY+ 3265GCM 1HP owner's manual

Chamberlain

Chamberlain Whisper Drive SECURITY+ WD822K Series owner's manual

Chase Doors

Chase Doors DuraShield installation manual

CSI

CSI Classic installation instructions

HATO

HATO 120 Automation manual

Chamberlain

Chamberlain Elite 3575S owner's manual

Richmond

Richmond GTR156 user manual

Raynor

Raynor 1280RGD owner's manual

CAME

CAME F4000 Series installation manual

B&D

B&D Controll-A-Door 5 instruction manual

BFT

BFT PRV AA SL Installation and user manual

Craftsman

Craftsman 139.53924 owner's manual

Chamberlain

Chamberlain MyQ 940ESTD owner's manual

Automatic Technology

Automatic Technology GDO-9V1 SecuraLift installation instructions

Westfalia

Westfalia 19 36 07 instruction manual

Chamberlain

Chamberlain HD520EVP manual

Cardin

Cardin BL Series instruction manual