Generay MOCHI LIGHT User manual
USER MANUAL
MOCHILIGHT
MOCHI On-Camera Mini RGB Light - USER MANUAL
2
The Mochi is a compact and fun on-camera mini RGB LED light
you can pop onto your camera and add advanced lighting effects
to any project you’re shooting. The Mochi’s simple interface
lets you select operating modes and control color temperature,
RGB, and brightness settings to match your subjects and add
some color when you need it. Turn on one of the twenty-one
lighting effects and dazzle your audience by adding realism
and drama to your video. The built-in rechargeable Li-ion
battery will give you nearly an hour and a half of run time at full
power, which is plenty of time to get all the shots you need.
THANK YOU FOR
CHOOSING GENARAY.
MOCHI On-Camera Mini RGB Light - USER MANUAL 3
introduction
MOCHI On-Camera Mini RGB Light - USER MANUAL
4
· Please read and follow these
instructions, and keep this
manual in a safe place.
· Keep this product away
from water and flammable
gases or liquids.
· Use with only the correct,
recommended voltage.
· Do not attempt to
disassemble or repair
this product.
· Clean this product with
only a soft, dry cloth.
· All images are for
illustrative purposes only.
PRECAUTIONS
precautions
MOCHI On-Camera Mini RGB Light - USER MANUAL 5
overview
Value dial
Adjustment
selector/
Effect selector
Mode
selector
USB-C
charging port
LCD screen
1/4-20
mounting
sockets
MOCHI On-Camera Mini RGB Light - USER MANUAL
6
MOUNTING TO A TRIPOD
OR LIGHT STAND
Screw the Mochi onto a
light stand’s 1/4-20 stud,
and tighten until secure.
MOUNTING TO A CAMERA
1. Screw the two
washers onto
the 1/4-20
stud so the flat
surfaces face
out away from
each other.
2. Slide the mounting foot
completely into the camera’s
mounting shoe. Tighten
the bottom washer until it’s
snug against the camera.
3. Screw the Mochi onto the
1/4-20 stud. Then tighten
the top washer until it’s
snug against the light.
MOUNTING THE LIGHT
instructions
MOCHI On-Camera Mini RGB Light - USER MANUAL 7
MAGNETIC MOUNTING
Use the built-in lightweight
magnets to attach the light
to a metal surface.
Note: This feature is best
for mounting the light
under a shelf or desk.
Plug the USB-C connector into
the Mochi, and plug the USB-A
connector to a powered USB port.
When it’s powered on, the
battery indicator will show
the battery’s power level.
CHARGING THE MOCHI
instructions
MOCHI On-Camera Mini RGB Light - USER MANUAL
8
ON-OFF / MODE SELECTOR
Turn the mode selector to
turn the light on and choose
one of the operating modes:
CCT, HSI, and EFF.
VALUE DIAL
In all operating modes, turn
the value dial to change the
selected onscreen parameter.
ADJUSTMENT SELECTOR
Press the adjustment
selector to cycle through
the adjustable parameters
in each operating mode.
CCT
Adjusts the color
temperature from
2500 to 9900 K.
BRIGHTNESS
Adjusts the brightness
from 1% to 100%.
USER INTERFACE CCT MODE
CCT 6200K
CCT 100%
instructions
MOCHI On-Camera Mini RGB Light - USER MANUAL 9
HSI MODE EFF MODE
HSI H:359°
HUE
Adjusts the
hue from 0°
to 360° of the
color wheel.
SATURATION
Controls the
saturation of
the hue from
0% to 100%.
BRIGHTNESS
Adjusts the
brightness from
1% to 100%.
Turn the
selector to
EFF mode.
Press the
effects
selector
button to
cycle through
the effects.
BRIGHTNESS
Adjusts the
brightness
from 1%
to 100%.
HSI S :10 0 %
F-5 Flame 1
F-6 25%
HSI 1%
instructions
MOCHI On-Camera Mini RGB Light - USER MANUAL
10
EFFECTS
1. Flash: Simulates multiple
camera flashes with short
bursts of white light.
2. Fast: Similar to Flash, with short
and rapid bursts of white light.
3. TV Screen: Simulates the
constant glow from a television.
4. Candle: Simulates the warm
light of a flickering candle with a
constant color temperature and
brief changes in brightness.
5. Flame 1: Simulates the dim light
of a campfire or fireplace with a
constant color temperature and
brief changes to brightness.
6. Flame 2: Similar to Flame 1, with
more rapid changes in brightness.
7. Police: Simulates the flashing
lights of an emergency vehicle with
alternating red and blue strobing.
8. Ambulance: Simulates the flashing
blue light of an ambulance.
9. Fire Truck: Simulates the
flashing red light of a fire truck.
10. Strobe 1: A constant
white strobe light.
11. Strobe 2: Similar to Strobe 1,
with more rapid strobing.
instructions
Table of contents
Other Generay Lighting Equipment manuals
Generay
Generay SP-E-500II-BD4 User manual
Generay
Generay Endeavor ML-33K User manual
Generay
Generay SpectroLED Studio 800 User manual
Generay
Generay LF-RGB-65 User manual
Generay
Generay TIR-1X1B User manual
Generay
Generay BA-VMount User manual
Generay
Generay RGB-6X3S User manual
Generay
Generay RGB Series User manual
Generay
Generay RSF-11-RGB User manual
Popular Lighting Equipment manuals by other brands
Qazqa
Qazqa Suplux SL 3 Black 103062 instruction manual
Commercial Electric
Commercial Electric 54568141 Use and care guide
CREE LIGHTING
CREE LIGHTING 304 Series installation instructions
Goobay
Goobay 49867 user manual
ECOMAN ITALIA
ECOMAN ITALIA LED T8 instruction manual
Alkalite
Alkalite Krypton KT-81 user manual
