Generac Power Systems 5464 User manual

ENVIRONMENTAL SPECIFICATIONS

Operating Temperature.......................................................................................................................................................................... -25 º C to 60 º C

Humidity............................................................................................................................................................................... 0 to 95% Non-Condensing

Power Supply..........................................................................................................................................................................................+12 or +24 VDC

Power Usage ............................................................................................................................................................................................ 6 Watts typical

Communication Line.......................................................................................................................... RS485 fully isolated twisted pair cable with shield

Maximum Cable Length.................................................................................................................................................................................... 4000 feet

Relay Output.............................................................................One NO contact (Engergized when annunciator is powered and no faults are present)

Relay Contact Rating.............................................................................................................................................................................. 30 VDC, 1 amp

STANDBY GENERATOR ACCESSORIES

21 Light Remote Annunciator

Liquid-Cooled Generator Sets

Model 5465

Model 5466

Model 5464

The Remote Annunciator Panel provides remote monitoring and

annunciation of up to 18 generator parameters using LED’s located on

the annunciator keypad. It also provides two system level warnings which

are System Ready and Communications OK.

The Relay panel has up to 8 selectable functions on form A relays,

and multiple relay panels can be connected for all 18 generator

parameters.

The speciﬁc faults can be selected using either the DIP switches located

on the annunciator circuit board or through a computer via the RS232

connection on the circuit board. All relays are energized on power up and

open during a fault condition.

Communication is via a RS485 serial data link and power is supplied by

the generator battery (+12 VDC or +24 VDC)

Note: These units are only compatible with the H-series generator

controller (70-150 kW)

DESCRIPTION

Speciﬁcations

Surface Mount Annunciator

21 Light Remote Annunciator

Flush Mount Annunciator

Function Color Alarm Latched

Pre-Low Oil Pressure Yellow nYes Yes

Pre-High Water Temp Yellow nYes Yes

Pre Low Water Temp Yellow nYes Yes

Pre-Low Fuel Yellow nYes Yes

Battery Charge AC Fail Yellow nYes No

Low Battery Voltage Yellow nYes No

High Battery Voltage Yellow nNo No

Not in Auto Red nYes No

RPM Sensor Loss Red nYes Yes

Overcrank Red nYes Yes

Overspeed Red nYes Yes

Low Oil Pressure Red nYes Yes

Hi Water Temp Red nYes Yes

Low Water Level Red nYes Yes

Emergency Stop Red nYes No

Gen Running Yellow nNo No

Gen Power (ATS) Yellow nNo No

Line Power (ATS) Green nNo No

Systems Ready Green nYes No

Communications OK Green nYes No

Spare Green nNo No

Spare Keypad Switch - Can be used to implement a remote start function. (Model 5464 only)

5.8

4.530.812 Dia.

0.812 Dia.

Both sides

0.86

9.06 1.64

2.32

6.49

11.42

8.27

9.64

Outside

Cut

Rough Opening

6.75 " x 9.88 "

Four mounting holes for

21 Light Annunciator

4-mm -0.7 Female Thread

1.57

Thru

R0.59

Both Sides

1.93

10.24

7.09

1.21

1.42

0.87

The 21-Light Annunciator can mount to

a ﬂat surface with connections through

the 0.812 Dia. knockout on the back

surface or through 0.812 knockouts on

sides as shown.

This Flush Mount Box is recessed

into the wall opening and the sur-

face mount annunciator mounts to

the (4) 4 mm screw holes on the

back surface. After wire connec-

tions are made the front annuncia-

tor cover is attached.

Generac Power Systems, Inc. • P.O. Box 297, Whitewater, WI 53190 • guardiangenerators.com

This manual suits for next models

Table of contents

Other Generac Power Systems Switch manuals

Generac Power Systems

Generac Power Systems 006852 User manual

Generac Power Systems

Generac Power Systems 04635-0 User manual

Generac Power Systems

Generac Power Systems RTSW100G3 User manual

Generac Power Systems

Generac Power Systems TMS200 User manual

Generac Power Systems

Generac Power Systems Automatic Transfer Switch User manual

Generac Power Systems

Generac Power Systems RTSN100J3S User manual

Generac Power Systems

Generac Power Systems RXGW20SHA3 User manual

Generac Power Systems

Generac Power Systems EZ Switch RTS16EZA1 User manual

Generac Power Systems

Generac Power Systems GTS "W" User manual

Generac Power Systems

Generac Power Systems CTTS Series User manual

Generac Power Systems

Generac Power Systems 004945-1 User manual

Generac Power Systems

Generac Power Systems GenTran 6294 User manual

Generac Power Systems

Generac Power Systems GenTran 6375 User manual

Generac Power Systems

Generac Power Systems RXSW100A3CUL User manual

Generac Power Systems

Generac Power Systems RTSX100A3 User manual

Generac Power Systems

Generac Power Systems RTS Series User manual

Generac Power Systems

Generac Power Systems GenTran 6295 User manual

Generac Power Systems

Generac Power Systems rtsy100a3 User manual

Generac Power Systems

Generac Power Systems GenReady Series 005448-2 Installation guide

Generac Power Systems

Generac Power Systems GenTran 6294 User manual

Generac Power Systems

Generac Power Systems rtg16eza1 User manual

Generac Power Systems

Generac Power Systems 004635-3 User manual

Generac Power Systems

Generac Power Systems GenTran 6335 User manual

Generac Power Systems

Generac Power Systems TTS Series User manual

Popular Switch manuals by other brands

URC

URC Total Control MFS-8 installation manual

Azbil

Azbil HPQ-D11 user manual

Sony

Sony DFS-900M operating instructions

SICK

SICK i17S operating instructions

F&F

F&F SZR-277 quick start guide

Shure

Shure UAMS/BK user guide

Dräger

Dräger X-zone Switch Off Instructions for use

Asco

Asco Joucomatic 349 Series manual

BT Mini Hub user guide

D-Link

D-Link DES-1226G manual

Johnson Controls

Johnson Controls FS80-C installation instructions

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Configuration guide

MicroNet

MicroNet SP1200A user manual

Ruijie

Ruijie RG-PF2920 Series Hardware installation and reference guide

Altinex

Altinex DA1914SX user guide

MiLAN

MiLAN MIL-SM2401M user guide

RJM

RJM MASTERMIND PBC/6X user manual

Atlas

Atlas MMK-KVM8 owner's manual