gefran EXP-D20A6 User manual
...... Instruction Manual
SIEIDrive
I/O expansion card
EXP-D20A6
12 Digital Inputs
8 Digital Outputs
2 Analog Inputs
2 Analog Outputs (V)
2 Analog Outputs (I)
Vi ringraziamo per avere scelto questo prodotto Gefran.
Saremo lieti di ricevere all’indirizzo e-mail: [email protected] qualsiasi informazione
che possa aiutarci a migliorare questo manuale.
Durante il suo periodo di funzionamento conservate il manuale in un luogo sicuro e a
disposizione del personale tecnico.
Gefran spa si riserva la facoltà di apportare modiche e varianti a prodotti, dati, dimen-
sioni, in qualsiasi momento senza obbligo di preavviso.
I dati indicati servono unicamente alla descrizione del prodotto e non devono essere
intesi come proprietà assicurate nel senso legale.
Tutti i diritti riservati.
Thank you for choosing this Gefran product.
We will be glad to receive any possible information which could help us improving this
manual. The e-mail address is the following: [email protected].
Keep the manual in a safe place and available to engineering and installation personnel
during the product functioning period.
Gefran spa has the right to modify products, data and dimensions without notice.
The data can only be used for the product description and they can not be understood
as legally stated properties.
All rights reserved
Sommario
1. Descrizione / Introductions ...................................................4
2. Fissaggio / Mounting.............................................................5
3. Connessione Ingressi-Uscite / Terminal Board Points .........7
3.1 Connessione Ingressi Digitali / Digital Inputs Terminal Board Points 7
3.2 Connessione Uscite Digitali / Digital Outputs Terminal Board Points 7
3.3 Connessione Ingressi Analogici / Analog Inputs Terminal Board
Points ................................................................................................. 8
3.4 Connessione Uscite Analogiche/ Analog Outputs Terminal Board
Points ................................................................................................. 8
3.5 Schema a Blocchi Interno / Functional Overview ............................ 9
4. Jumpers ..............................................................................10
5. LEDs ....................................................................................10
6. Caratteristiche Tecniche/ Technical Data ...........................11
Dimensioni e peso / Dimensions and weight ...........................................11
Caratteristiche generali ...........................................................................12
Ingressi digitali .......................................................................................12
Uscite digitali ..........................................................................................12
Ingressi analogici ....................................................................................12
Uscite analogiche in tensione .................................................................13
Uscite analogiche in corrente .................................................................13
Temperatura............................................................................................13
General data ...........................................................................................13
Digital inputs ...........................................................................................13
Digital outputs ........................................................................................14
Analog inputs ..........................................................................................14
Voltage Analog outputs ...........................................................................14
Current Analog outputs ...........................................................................14
Temperature ...........................................................................................15
7. Accessori / Accessories .....................................................15
8. Sezione massima cavi / Maximum wire sizes ....................15
—————— EXP-D20A6 ——————
4
1. Descrizione / Introductions
La EXP-D20A6 è una scheda di espansione per i drive della serie AVy. E’
possibile montare una sola scheda di I/O per Drive. La scheda è composta da:
- 12 ingressi digitali optoisolati 15...30V
- 8 uscite digitali optoisolate 15...30V 50mA max
- 2 ingressi analogici ±10V o 0...20mA o 4÷20mA
- 2 uscite analogiche ±10V
- 2 uscite analogiche ÷20mA o 4÷20mA
The EXP-D20A6 card is an AVy drive option used to add digital inputs, digital
outputs, analog inputs, analog outputs to the drive. It is possible to use only
one I/O expansion card per Drive. This option card features:
- 12optocoupled digital inputs 15V up to 30VDC
- 8 optocoupled digital outputs 15V up to 30VDC
- 2 analog inputs ±10V or 0 up to20mA or 4 up to 20mA
- 2 analog outputs ±10V
- 2 analog outputs 0 up to20mA or 4 up to 20mA
Vista frontale / Front side
Vista da dietro / Back side
5
—————— I/O Expansion card ——————
2. Fissaggio / Mounting
La scheda EXP-D20A6 viene fornita con un kit comprendente distanziali ed il
collegamento (C) scheda regolazione / scheda espansione.
1. Spegnere l’azionamento.
2. Fissare con le viti (B) e i distanziali (A) la scheda EXP-D20A6 alla scheda
di regolazione.
3. La scheda EXP-D20A6 si collega alla scheda di regolazione attraverso
il connettore XH. Su questo connettore sono presenti le alimentazioni e i
segnali.
4. Accendere l’azionamento.
The EXP-D20A6 card is supplied with standoffs and the cable for connection
between regulation and expansion card .
1. Switch the drive off.
2. Fasten the EXP-D20A6 card to the drive regulation board by means of
screws (B) and standoffs (A).
3. The EXP-D20A6 card is connected to the regulator card through the XH
connector using the supplied connector. The power supply (+5V) and the
control signals are provided by the drive via the XH connector.
4. Switch on the drive.
—————— EXP-D20A6 ——————
6
7
—————— I/O Expansion card ——————
3. Connessione Ingressi-Uscite / Terminal Board
Points
3.1 Connessione Ingressi Digitali / Digital Inputs Terminal
Board Points
Gli ingressi digitali hanno la massa in comune a gruppi di 4.
Connectors XDI0 and XDI1 have different ground connection.
Connector
Terminal 31 32 33 34 35
Function (Fw 1.X ) Digital input 5 Digital input 6 Digital input 7 Digital input 8 GND
Function (Fw 2.X ) DI0X DI1X DI2X DI3X GND
Connector
Terminal 36 37 38 39 40
Function (Fw 1.X ) n.a. n.a. n.a. n.a. GND
Function (Fw 2.X ) DI4X DI5X DI6X DI7X GND
Connector
Terminal 41 42 43 44 45
Function (Fw 1.X ) n.a. n.a. n.a. n.a. GND
Function (Fw 2.X ) DI8X DI9X DI10X DI11X GND
n.a. : not available
expDA10
XDI1
XDI0
XDI0
DIGITAL INPUTS
3.2 Connessione Uscite Digitali / Digital Outputs Terminal
Board Points
Le uscite digitali richiedono un’alimentazione esterna di +15V…+24V. Può
essere utilizzata a tale scopo la tensione +24V disponibile in morsettiera del
drive. La massima caricabilità disponibile dal drive a +24V = 120 mA inclusa
l’alimentazione Encoder, LAN, schede EXP e APC (oppure 350mA sono di-
sponibili senza la scheda APC montata).
Al morsetto 60 (PWR) deve essere collegata l’alimentazione positiva, il comune
è il morsetto 55 (COM).
Digital outputs need a +15V…+24V supply voltage. The Drive TB can be used
to supply 24VDC power. AVy 24VDC supply maximum output = 120 mA total
including Encoder, LAN, EXP card and APC (or 350 mA without APC).
—————— EXP-D20A6 ——————
8
Terminal 60 is power supply, terminal 55 is the common power supply.
Connector
Terminal 51 52 53 54 55
Function (Fw 1.X ) Digital output 3 Digital output 4 Digital output 5 COM Digital output 6
Function (Fw 2.X ) DO0X DO1X DO2X COM DO3X
Terminal 56 57 58 59 60
Function (Fw 1.X ) Digital output 7 Digital output 8 n.a. n.a. PWR
Function (Fw 2.X ) DO4X DO5X DO6X DO7X PWR
n.a. : not available
expDA20
DIGITAL OUTPUTS
XDQ
3.3 Connessione Ingressi Analogici / Analog Inputs Terminal
Board Points
Gli ingressi analogici sono differenziali.
Differential analog inputs are available.
Connector
Terminal 1 2 3 4 5
Function (Fw 1.X ) n.a. n.a. n.a. n.a. GND
Function (Fw 2.X )
An inp 1X + An inp 1X - An inp 2X + An inp 2X -
GND
n.a. : not available
expD30
ANALOG INPUTS
XAI
3.4 Connessione Uscite Analogiche/ Analog Outputs Terminal
Board Points
Connector
Terminal 11 12 13 14 15
Function (Fw 1.X ) Analog output 3 GND Analog output 4 GND GND
Function (Fw 2.X ) An out 1X GND An out 2X GND GND
Connector
Terminal 21 22 23 24 25
Function (Fw 1.X ) not available not available not available not available GND
Function (Fw 2.X ) An out 3X + An out 3X - An out 4X + An out 4X - GND
expDA40
VOLTAGE ANALOG OUTPUTS
XAQV
XAQI
CURRENT ANALOG OUTPUTS
9
—————— I/O Expansion card ——————
3.5 Schema a Blocchi Interno / Functional Overview
51
55
60
DIGITAL OUTPUTS CONNECTOR XDQ
41
42
43
44
DIGITAL INPUTS
CONNECTOR XDI2
45
+24V (PWR)
0V (COM)
52
53
54
56
57
22
21
24
23
GND 25
VOLTAGE ANALOG
CONNECTOR XAQI
OUTPUTS
ANALOG INPUTS
CONNECTOR XAI
GND
2
1
4
3
5
GND 12
11
GND 14
13
GND 15
CURRENT ANALOG
CONNECTOR XAQV
OUTPUTS
58
59
31
32
33
34
DIGITAL INPUTS
CONNECTOR XDIO
35
GND
36
37
38
39
DIGITAL INPUTS
CONNECTOR XDI1
40
(DI4X)
(DI5X)
(DI6X)
(DI7X)
GND
(DI8X)
(DI9X)
(DI10X)
(DI11X)
GND
(DO6X)
(DO7X)
Anal. out. 3 (An out 1X)
Anal. out. 4 (An out 2X)
(An out 3X +)
(An out 3X - )
(An out 4X +)
(An out 4X - )
(An inp 1X +)
(An inp 1X - )
(An inp 2X +)
(An inp 2X - )
Digital input 5
(DI0X)
Digital input
(DI1X)
6
7Digital input
(DI2X)
Digital input
(DI3X)
8
Digital output 3
(DO0X)
Digital output 4
(DO1X)
Digital output 5
(DO2X)
Digital output 6
(DO3X)
Digital output 7
(DO4X)
Digital output 8
(DO5X)
Note!(in brackets) = Fw 2.X
Nota!(tra parentesi) = Fw 2.X
—————— EXP-D20A6 ——————
10
4. Jumpers
La tabella seguente descrive i ponticelli presenti sulla scheda.
Following table describes the expansion board jumpers.
Name Description
Default
Adaption to the input signal of analog input 1
ON 0…20mA / 4…20mA
OFF 0…10V / -10V…-10V
Adaption to the input signal of analog input 2
ON 0…20mA / 4…20mA
OFF 0…10V / -10V…-10V
expDA50
S3
OFF
OFF
JUMPERS ON BOARD
S2
Disponibilità I/O dipendenti dalla versione rmware del drive
I/O available depending on drive rmware version
Drive firmware 1.X from 2.X
Digital Inputs 4 12
Digital Outputs 6 8
Analog Inputs - 2
Analog Outputs 2 4
expDA75
5. LEDs
+5V ������������������ Il led è acceso quando è presente la tensione +5V
fornita dal Drive
The led is lit when internal +5V power supply is
available from the Drive.
+15V ����������������� Il led è acceso quando il Drive fornisce la tensione
+15V
The led is lit when +15V power supply is provided
by the Drive
-15V ������������������ Il led è acceso quando il Drive fornisce la tensione
-15V
The led is lit when +-15V power supply is provided
by the Drive
Table of contents
Other gefran DC Drive manuals
gefran
gefran ADV200 WA User manual
gefran
gefran KFM LD User manual
gefran
gefran ADV200-...-DC Series Troubleshooting guide
gefran
gefran ADV200 Series Troubleshooting guide
gefran
gefran ADV200-SI Series User manual
gefran
gefran EXP-SFTy User manual
gefran
gefran ADV200 WA Parts list manual
gefran
gefran ADV200-HC User manual
gefran
gefran TPD32-EV-...-4B User manual
gefran
gefran AGy-L Series Guide
Popular DC Drive manuals by other brands
ABB
ABB RSYC-01 user manual
Rockwell Automation
Rockwell Automation PowerFlex 700S Programming manual
WEG
WEG DeviceNet CFW500 user manual
Siemens
Siemens SINAMICS G List manual
Siemens
Siemens SINAMICS SM150 6SL3815-7NP41-0AA1 Operating instructions & installation instructions
SOMFY
SOMFY JR RU 30 instructions