Gefen EXT-GEFENTV1.3-441 User manual
Gefen TV
Switchter
USER MANUAL
www.gefen.com
Technical Support:
Telephone (818) 772-9100
(800) 545-6900
Fax (818) 772-9120
Technical Support Hours:
8:00 AM to 5:00 PM Monday through Friday.
Write To:
Gefen Inc.
C/O Customer Service
20600 Nordhoff St.
Chatsworth, CA 91311
Notice
Gefen Inc. reserves the right to make changes in the hardware, packaging and any
accompanying documentation without prior written notice.
Gefen TV Swithcer Switcher is a trademark of Gefen Inc.
HDMI is a trademark of hdmi.org
© 2007 Gefen Inc., All Rights Reserved
ASKING FOR ASSISTANCE
TABLE OF CONTENTS
Introduction
Features
Panel Descriptions
Connecting and Operating the Gefen TV Switcher / Device Buttons /Automatic
Switching
RMT4-IR Installation
IR Code Conflicts
Specifications
Warranty
1
2
3
4
5
6
7
8
Congratulations on your purchase of the Gefen's TV Swithcer. Your complete
satisfaction is very important to us.
Gefen’s line of HDTV switches, extenders, and splitters are designed to make yourA/V
equipment use more comfortable, more productive and less expensive.
The Gefen TV Switcher allows access to four HDTV devices, using one HDTV display.
The ex•tend•it line offers solutions for Home Theater, AV installation, data center,
information distribution, conference room presentation, school and corporate training
environments.
Our Commitment
Gefen will always offer the finest quality product at the best possible price. Included in
that price is a lifetime support from a team of outstanding engineers.
The ex•tend•it Gefen TV Switcher allows four HDTV HDMI devices to be switched easily
in to one HDTV HDMI compatible monitor or projector. Simply connect your HDTV
display to the Switcher’s display output. The Gefen TV Switcher can also be placed at
the end of a long HDMI cable to regenerate the HDMI signal.
INTRODUCTION
1
FEATURES
Features
• Switches easily between any four HDMI sources
• Maintains 480p, 720p, 1080i, and 1080p resolutions
• Maintains highest HDMI single link video resolution
• Supports HDCP compliant devices
• HDMI or DVI to HDMI cables are used to connect the inputs and switcher output
• Inputs can be switched automatically, with the IR remote control or toggled between.
• Installs in seconds
• Automatic switching
• Fully HDMI 1.3 compliant
Includes:
(1) Gefen TV Switcher
(1) 6’ HDMI cables (M-M)
(1) 5VDC Power Supply
(1) RMT4-IR
(1) Users Manual
2
PANEL DESCRIPTIONS
3
IR Eye
HDMI
Output Input 4 Input 3 Input 2 Input 1
Enhance
and Input
Button
Power Supply
Input
Power and Channel
LED Indicators
CONNECTING AND OPERATING THE Gefen TV SWITCHER
How to Connect the Gefen TV Switcher to your devices
1 Connect the supplied cable from the HDTV HDMI source into the Gefen TV Switcher
inputs.
2Connect the cable from your display (monitor or projector) into the HDMI out of the
Gefen TV Switcher.
3 Plug the 5VDC power supply into the Gefen TV Switcher.
How to Control the Gefen TV Switcher
Use the RMT4-IR remote control to toggle between sources, or turn on source, or press
input button.
4
Enhance Button
By pressing the Enhance button you allows the switcher to do a pre-emphasis on the
signal.
Input Select Button
Allows you to toggle between inputs.
DEVICE BUTTONS
AUTOMATIC SWITHCING
Automatic swithcing is done very easily. Whenever you power on your device on a
certain input, that input will become active. If you power down the device on that input,
the switcher will revert back to the previous input that was active.
The remote and input select button will always allow you to switch manually. The remote
will switch discretely to any input, while the input select button will allow you to toggle
between inputs.
5
RMT4-IR INSTALLATION
1. Remove battery cover from the back of the RMT4-IR remote.
2. Verify that dip switches 1 & 2 are in the down (OFF) position.
3. Insert the battery, hold the battery so that you can see the positive side facing up. The
side that is not marked must be facing down.
4. Test the RMT4-IR remote by pressing ONLY one button at a time. The indicator light
on the remote will flash once each time you press a button. WARNING: Do not press
multiple buttons simultaneously and do NOT press buttons rapidly. These actions will
cause the remote to reset and steps 1-4 will have to be repeated.
Note: The RMT4-IR ships with two batteries. One battery is required for operation, the
second battery is complimentary.
IR CODE CONFLICTS
How to Resolve IR Code Conflicts
If you are expriencing IR conflicts, you can change the IR Code of the remote and switcher.
You can do so by holding the Enhance button down for 5 seconds and wait for the LED's
to flash in front of the unit. The LED's will flash the current IR channel. Press the Input
button to select which IR Code you want to set both the switcher and remote to. Press the
enhance button to finish. If this does not work, please call Gefen's tech support for further
assistance.
12
Remote Channel 1:
12
Remote Channel 2:
12
Remote Channel 3:
12
Remote Channel 4:
Remote
6
SPECIFICATIONS
7
Video Amplifier Bandwidth ................................................................................. 2.25 GHz
Input Video Signal ......................................................................................... 1.2 volts p-p
Input DDC Signal .................................................................................... 5 volts p-p (TTL)
Single Link Range ....................................................................1080p 10 bit/ 1920 x 1200
Input Connector Type .............................................................................................. HDMI
Output Connector Type ............................................................................................HDMI
Power Consumption ................................................................................ 10 Watts (max.)
Power Supply .......................................................................................................... 5VDC
Dimensions ........................................................................ 6.875”W x 2.125”H x 6.875”D
Shipping Weight ....................................................................................................... 5 Lbs
Table of contents
Other Gefen Switch manuals
Gefen
Gefen DVI-4X1 User manual
Gefen
Gefen EXT-DVIKVM-241DL User manual
Gefen
Gefen HDMI 1.3 4x1 Switcher User manual
Gefen
Gefen DVIKVM-241SL User manual
Gefen
Gefen GTV-AUDDEC-N User manual
Gefen
Gefen VGA-4X1 User manual
Gefen
Gefen EXT-HDMI-442 User manual
Gefen
Gefen EXT-DP-841 User manual
Gefen
Gefen 4x1 DVI Switcher User manual
Gefen
Gefen EXT-DVIKVM-841DL User manual
Gefen
Gefen EXT-USB-400FON User manual
Gefen
Gefen HDTV-441N User manual
Gefen
Gefen EXT-DVIKVM-441 User manual
Gefen
Gefen GTV-HDMI1.3-441 User manual
Gefen
Gefen DVI-441DLS User manual
Gefen
Gefen HDTV-441 User manual
Gefen
Gefen HDMI1.3-341 User manual
Gefen
Gefen EXT-DVI-422DL User manual
Gefen
Gefen HDTV-241A User manual
Gefen
Gefen EXT-HDMI1.3-242 User manual
