Gefen RS-232 User manual

CAT-5 Cables

VGA Cables

Optional

Accessories

GA RS232 extende

Extends any VGA or Component HD display plus RS-232 using a Single

CAT-5 cable up to 330 feet away.

How It Works

The VGA RS232 Extender sender unit connects to your source using the supplied VGA and RS-

232 cables. The receiver unit connects to your display and your Serial (RS-232) device - up to 330

feet away. Connect the sender and the receiver to each other using a single CAT-5 cable.

Features:

zExtends any VGA or high definition component display and RS-232 device up to 330 feet

(100 meters)

zTrim pot and dip switches for fine video equalization

zPerfect for digital signage applications

zOne CAT-5 cable for extension

zSupports resolutions up to 1080p, 2K, and 1920 x 1200

Specifications:

zVideo Amplifier Bandwidth: 350 MHz

zInput Video Signal: 1.2 Volts p-p / Input

zHorizontal Frequency Range: 15-70 KHz

zVertical Frequency Range: 30 - 170 Hz

zVideo In: HD-15 male

zVideo out: HD-15 female

zRS232 Input Connector: DB-9 female

zRS232 Output Connector: DB-9 male

zLink Connector: RJ-45 Shielded

zConforms to RS-232C standards

zPower Supply: 5V DC

zPower Consumption: 5 watts (max.)

zDimensions: 4" W x 1.125" H x 3" D

zShipping Weight: 3 lbs.

Package Includes:

zVGA RS232 Extender Sender

zVGA RS232 Extender Receiver

z6 foot VGA cable (M-F)

z6 foot Serial cable

zTwo 5V external power supplies

EXT-VGARS232-141

Dystrybucja i sprzedaż: Meditronik Sp. z o.o.

02-952 Warszawa, ul. Wiertnicza 129, tel. (+48 22) 651-72-42, fax (+48 22) 651-72-46

http://www.meditronik.com.pl e-mail: [email protected]

VGA RS-232

Extender

USER MANUAL

www.gefen.com

Technical Support:

Telephone (818) 772-9100

(800) 545-6900

Fax (818) 772-9120

Technical Support Hours:

8:00 AM to 5:00 PM Monday thru Friday.

Write To:

Gefen Inc.

c/o Customer Service

20600 Nordhoff St

Chatsworth, CA 91311

www.gefen.com

[email protected]

Notice

Gefen Inc. reserves the right to make changes in the hardware, packaging and any

accompanying documentation without prior written notice.

VGA RS232 Extender is a trademark of Gefen Inc.

Macintosh is a trademark of Apple Computer Inc.

ASKING FOR ASSISTANCE

TABLE OF CONTENTS

INTRODUCTION

OPERATION NOTES

PANEL DESCRIPTIONS

INSTALLATION INSTRUCTIONS

HOW TO ADJUST THE PICTURE

CAT5 WIRING DIAGRAM

SPECIFICATIONS

WARRANTY

Thank you for purchasing the new ex•tend•it VGARS232 Extender by Gefen, Inc.

The ex•tend•it VGARS232 Extender by Gefen allows users the beneﬁts of extending VGA

and RS232 signals beyond the desktop. The VGA RS232 Extender series can be used

to extend a VGA and RS232 signal to cover the distance of 330 feet. Industry standard

Category 5 (CAT-5) cable is used for the extension.

CONTENTS

The VGA RS232 Extender system consists of:

(1) VGA RS232 Extender sender unit

(1) VGA RS232 Extender receiver unit

(2) 5 VDC power supply

(1) VGA M-F cables (6FT)

(1) Serial Cable

(1) User Manual

HOW IT WORKS

Inits mostbasicapplication, theVGARS232 Extendersenderresides nexttothe computer.

With the supplied VGA and Serial cable, the VGA RS232 Extender sender is connected

to the computer. The VGA RS232 Extender receiver is then placed next to the monitor or

projector and RS232 device. Industry standard Category 5 (CAT-5) cable is used to link

the VGA RS232 Extender sender and VGA RS232 Extender receiver together.

INTRODUCTION

READ THESE NOTES BEFORE INSTALLING

OR OPERATING THE VGA RS232 EXTENDER SYSTEM

• Use industry standard Category-5 (CAT-5) cable to operate the VGA RS232 Extender

system. CAT-5 E cable is preferred.

• Please connect all the cables between the computer and the VGA RS232 Extender

before powering up the VGA RS232 Extender unit.

• The VGA RS232 Extender units are housed in a metal box for better RF shielding.

OPERATION NOTES

PANEL DESCRIPTIONS

Connect the VGA RS232 Extender sender unit to the VGA and RS232 output on

the back of your computer. The six foot RS232 and M-F VGA cables connect the

CPU and sender unit together.

Connect the VGA RS232 Extender receiver unit to your monitor with the VGA cable

that is attached to your monitor.

Connect the VGA RS232 Extender receiver unit to your RS232 device.

Connect the CAT5 cable between the VGA RS232 Extender sender and receiver’s

CAT5 input.

Plug the 5 volt power supplies into both the sender and receiver unit.

NOTE: The Brightness trim pod “B” can be adjusted to change the brightness of

the picture.

INSTALLATION INSTRUCTIONS

HOW TO ADJUST THE PICTURE

The ﬁrst step in adjusting the video quality is to display text and a graphic on your monitor

(i.e. desktop icons). Then set your computer to the resolution that you will be using most

frequently. The dip switches are used to set the focus and sharpness of the picture to the

best possible setting. Set the dip switches to the settings that are recommended for the

different lengths of CAT5 cable (see chart below). Verify that the picture quality is to your

satisfaction. If the recommended setting does not produce a great quality picture, try using

a different dip switch setting. The trim pod next to the VGA connector on the VGA RS232

Extender-R allows brightness adjustments for video.

0-25 Feet All dip switches OFF for all colors.

26-100 Feet Set dip switch #1 ON all colors. 1,2,3 remain OFF.

101-200 Feet Set dip switch #2 ON all colors. 1,2,4 remain OFF.

201-300 Feet Set dip switch #3 ON all colors. 1,3,4 remain OFF.

301 Feet and Up Set dip switch #4 ON all colors. 2,3,4 remain OFF.

NOTE: The dip switches are set to the OFF position when the switch is closest to the

number or in the down position.

White/Orange

Orange

White/Green

Blue

White/Blue

Green

White/Brown

Brown

RJ-45 Jack RJ-45 Jack

1818

CAT5 WIRING DIAGRAM

Other manuals for RS-232

This manual suits for next models

Table of contents

Other Gefen Extender manuals

Popular Extender manuals by other brands

SY HDBT-60T installation guide

Appsys ProAudio

Appsys ProAudio ADX-16 user manual

Atlona

Atlona RS232 user manual

IDK

IDK OPF-TH1000-A user guide

Enable-IT

Enable-IT 824WP quick start guide

Worx

Worx Landroid RadioLink WA0864 Get started

TP-Link

TP-Link TL-WA730RE user guide

Camplex

Camplex CMX-HDMI-SFPL user manual

SC&T

SC&T HE03-4K user manual

Marmitek

Marmitek MegaView70 user manual

Samsung

Samsung SCS-26UC4 user guide

Foxun

Foxun SX-GES24 operating instructions

MuxLab

MuxLab 500771 Operation manual

foxunhd

foxunhd SX-AEX01 operating instructions

TERK Technologies

TERK Technologies LFIRX2 owner's manual

Devolo

Devolo Audio Extender supplementary guide

Edimax

Edimax EW-7438RPn V2 instructions

Shinybow USA

Shinybow USA SB-6335T5 instruction manual