Intended Use
• This product is a precision instrument and should only be used for it’s intended purpose only. Improper use or misuse
may cause SERIOUS INJURIES or could result in a potentially hazardous situation. NEVER use this product for any
other purposes.
• The safety messages, technical data involving ambient conditions and use in dry surroundings must be taken into
account at all times. .
PERMISSIBLE ENVIRONMENTAL CONDITIONS
If the tool is exposed to temperatures under 18°C or above 28°C or
atmospheric humidity higher than 90%,faulty tightening torque can
result. ALWAYS check the torque tool with an approved torque tester
before use in extreme climatic conditions. This product should
NEVER be exposed to wet or damp working environments. ALWAYS
keep work area clean and well lit.
Personal Protective Gear
ALWAYS wear personal protective gear when using the torque
tool to prevent SERIOUS INJURY. The torque tool can slip or
break.
ALWAYS wear EYE PROTECTION designed to protect your
eyes from flying objects when using this product. Particles may
be hurled upward during work with the torque tool which may
cause SERIOUS INJURY.
ALWAYS wear SAFETY GLOVES when using the torque
wrench. The torque tool can slip or break. This can cause
SERIOUS INJURY to fingers and hands
ALWAYS wear appropriate SAFETY SHOES with slip-resistant
soles and steel toe caps when using the torque tools to protect
feet and toes from SERIOUS INJURY .
OVERLOAD HAZARD!
• This torque checker can be overloaded during use and break as a
result. This might cause SERIOUS INJURY.
• NEVER use excessive force on the product.
• ALWAYS use the original accessory parts ONLY. When using
accessory parts not approved by the manufacturer there is also
the risk that they will not bear the loads.
• Check the torque checker for damage prior to EVERY application.
• NEVER use the torque checker if it has been dropped, has struck
against other objects or if objects have fallen on the tool.
FAULTY TIGHTENING TORQUE HAZARD
An uncalibrated torque checker can cause the tool and accessories to fail and produce faulty screw connections. This could
cause SERIOUS INJURY or DEATH.
• ALWAYS use tested and calibrated tools and tested torque testing equipment ONLY. Torque tools that are not fully tested
or serviced correctly risk being unable to bear the loads or could indicate faulty tightening torques.
• ALWAYS take the following safety information into account in order to prevent SERIOUS INJURY or DEATH:
• ALWAYS test the accuracy of the torque tool with an approved torque tester before use.
• A calibration certificate as per DIN EN ISO 6789 comes with the torque tools and the tool and the calibration certificate
are labelled with the identical traceable serial number.
• According to DIN EN ISO 6789 the minimum calibration interval requirement for a torque tool is 12 months or 5000 load
cycles (whichever occurs first). A firm’s own specifications or quality requirements for screwing applications can also lead
to considerably shorter calibration intervals.
Calibration should ONLY be implemented by authorized specialists, at an accredited calibration laboratory or by the
manufacturer. Under no circumstances should an attempt be made to adjust or repair a torque tool. A full repair and
calibration service is available on request, contact us for more information.
Maintenance
1.USBPowerinput
2.Mountingholes
3.Body
5.Button
6.Drive
4.Screen
