Refrigerator
SHABBOS KEEPER
100% Shabbos Certified Through 2050
NOTICE: Installation should be completed at least 24 hours prior to Sabbath so that the Shabbos Keeper
has sufcient time to update the refrigerator software. The Shabbos Keeper needs to be plugged into the
refrigerator at all times to ensure seamless operation. Use the magnetic back to place the Shabbos Keeper
in a convenient location. Be careful not to damage the Shabbos Keeper when moving the refrigerator.
Remove the Shabbos Keeper and communication
cable from the packaging. Plug one end of the
communication cableinto theShabbos Keeper.
Plug the other end of the communication cable into the
refrigerator. The communication port on the refrigerator
islocated ontop ofthe caseandbehind thedoors. You
mayhavetoremoveaplasticplugfromtheportbefore
installingcable.
The Shabbos Keeper will perform a software
update and display the screen below. This will take
approximately 15 minutes. Your refrigerator may
restart duringthis process.Do notdisconnectpower
tothe refrigerator during thistime.
1
24
3
Reversed view of
communication port.
UPDATING
SOFTWARE
...
After installationiscomplete, yourShabbos Keeper
is ready to be set up. Use the left and right arrow
buttons to move the cursor and use the up and
down buttons to input today’s date. Press enter
(middlebutton) once completed.
