Gazer F715 User manual
USER MANUAL
DASHBOARD CAMERA
GAZER F715
User manual �������������������������������������� 4-17
Руководство пользователя ����������������� 18-32
Посібник користувача ������������������������ 33-46
ENG
RU
UA
1. Precautions ..........................................................................5
2. Important information.............................................................6
3. Package contents ...................................................................7
4. Controls ...............................................................................8
5. Connecting the dash cam ........................................................9
6. Using the dash cam .............................................................. 10
7. Installing the dash cam ........................................................ 11
8. Description of indicators........................................................ 12
9. Button functions .................................................................. 13
10. Preparing the memory card ................................................... 14
11. Preparing the dash cam ........................................................ 15
12. Menu settings ...................................................................... 16
13. Product specications .......................................................... 17
Contents
ENG
4
Gazer F715
Congratulations! You are now the owner of a Gazer dash cam.
Make sure that you read this manual carefully before using the product.
Precautions
•Never use chemicals to clean the product.
•Please, use a soft cloth to clean the dash cam body and lens.
•Avoid hitting, dropping, and damaging the product mechanically.
•Do not use and store the product in extremely cold or hot environments.
- Storage temperature range: from -20 °С to +40 °С
- Operating temperature range: from +5 °С to +40 °С
•Should the equipment be exposed to low temperatures for a long time,
make sure that you warm it up to an operating temperature rst before
proceeding with connection and startup.
•Do not attempt to repair the dash cam yourself. In case of malfunctions,
contact the vendor or the service center.
•Neither the manufacturer nor the vendor shall be responsible for any
damages or lost prot due to the use of video footage and data obtained
with this dash cam.
ENG
5
Important information
Caution!
•Do not insert or remove the SD card when the power is on – this can lead
to dash cam malfunction. Prior to inserting or removing the memory card,
make sure that the dash cam is switched o or that its power has been
turned o for at least 30 seconds and its indicators went dark at least
10 seconds ago.
•Set the correct time and date before using the product.
•Observe at least half a second time interval while pressing control buttons.
Otherwise you may need to reboot the dash cam by unplugging the power
cable.
• Do not turn o the power for at least 20 seconds after the power cable is
connected. This is necessary to ensure the dash cam’s normal operation.
•If after starting the engine (with the power cable connected) the dash cam
fails to switch to the recording mode automatically, turn ACC power o for
10 seconds and then turn it back on.
•To install and connect the dash cam without voiding your vehicle warranty,
please contact an authorized service station.
• Loop recording of G-sensor write-protected les is limited to 30% of the
total storage space on the memory card. Files protected from overwriting
by pressing a special button use the same storage space but cannot be
overwritten. It is recommended to format the memory card every once in
a while or backup «accident» footage to a PC so that video recording never
stops due to insucient space.
ENG
6
Package contents
Gazer F715 dash cam Extra 3M tape for mounting
User manual
Power, control, and composite RCA
video output cable
Memory card micro SDHC Gazer +
Adapter*
3М adhesive pad for dash cam
mounting
* Depending on the region.
ENG
7
Controls
1. • REC Button – start or stop
video recording.
2. LEFT button – menu navigation.
3. RIGHT button – menu
navigation.
4. ОКbutton – selecting a
parameter in the menu.
5. Microphone.
6. PWR – power indicator (red).
7. А – sound recording indicator
(yellow).
8. V – video recording indicator
(blue).
9. Memory card slot – micro SD.
Do not insert or remove your SD
memory card when the power or
indicator lights are on.
10.Mount.
11.Lens.
12.Connector – for power cable
connection and video output.
8
1012 11
2
4
5
9
1 6 7
3
You can turn o the dash cam manually. To prevent the loss of the last recorded
clips, rst stop the recording by pressing • REC and then turn the dash cam o
by holding down • REC. Use the same button to turn the dash cam back on.
All button functions and indicator operation modes are described in detail on
p. 12-13.
ENG
8
Connecting the dash cam
Note: Gazer F715 dash cam requires direct connection to the car’s electrical
system. To install and connect the product without voiding your vehicle
warranty, please contact an authorized service station.
Connect the black wire (GND) to the vehicle’s ground. Connect the yellow wire
(BATT +) directly to +12 V car battery terminal or DC +12 V power line. Connect
the red wire (ACC) to the car’s +12 V ACC power wire (ACC power turns on when
the car engine starts and turns o when it stops).
When connected this way, the dash cam will turn on automatically and start
recording as soon as the car engine starts. Once the engine is turned o, the
dash cam will continue recording for one hour (default setting) after which the
recording will stop and the dash cam will shut down. You can select the recording
duration and dash cam operating mode after the engine is turned o using “Auto-
o time” and “Parking vibration” settings.
ENG
9
Using the dash cam
You can use the dash cam for CCTV recording when the car is parked. For this
you need to set the dash cam on-time after the ignition is turned o in “Auto-o
time” setting. In this case, when ACC power is o (i.e. when the engine is turned
o) the dash cam will continue operating in the Time-Lapse mode (1 fps). “Car
battery protect” function – prevents your car’s battery from depletion. The dash
cam will shut down correctly if the battery voltage drops below the minimal value
set in this menu item.
Note: Please, consult with an authorized service station prior to
changing “Car battery protect” settings.
When ACC power is o, the dash cam can operate in two modes that can be
selected in the “Parking vibration” item of the menu.
1. Dash cam operation with Time-Lapse mode (“Auto-o time”) and
parkingmode(“Parkingvibration”)on.
When set up this way, after ACC power is turned o, the dash cam continues
recording for 1 hour (default setting) in Time-Lapse mode with recording speed
reduced to 1 frame per second to save space on the memory card. If the
G-sensor detects an impact, the dash cam will record a 2-minute long write-
protected video le at 30 frames per second.
2. Dash cam operation with Time-Lapse mode (“Auto-o time”) on and
parkingmode(“Parkingvibration”)o.
When set up this way, after ACC power is turned o, the dash cam continues
recording for 1 hour (default setting) in Time-Lapse mode with recording speed is
reduced to 1 frame per second to save space on the memory card. In this mode,
the G-sensor will neither detect any impacts nor aect the recording mode.
ENG
10
Table of contents
Languages:
Other Gazer Dashcam manuals
