Garmin GTR 200B User manual
190-01553-00 GTR 200/200B Installation Manual
Rev. P Page A
© 2020
Garmin Ltd. or its subsidiaries
All Rights Reserved
Except as expressly provided herein, no part of this manual may be reproduced, copied,
transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without
the express prior written consent of Garmin. Garmin hereby grants permission to download a single
copy of this manual and of any revision to this manual onto a hard drive or other electronic storage
medium to be viewed and to print one copy of this manual or of any revision hereto, provided that
such electronic or printed copy of this manual or revision must contain the complete text of this
copyright notice and provided further that any unauthorized commercial distribution of this manual
or any revision hereto is strictly prohibited.
Garmin International, Inc.
1200 E. 151st Street
Olathe, KS 66062 USA
www.garmin.com
Garmin (Europe) Ltd.
Liberty House, Hounsdown Business Park
Southampton, Hampshire SO40 9LR U.K.
Garmin AT, Inc.
2345 Turner Rd., SE
Salem, OR 97302 USA
RECORD OF REVISIONS
AVIATION LIMITED WARRANTY
GTR 200/200B warranty information is available at garmin.com/aviationwarranty.
Revision Revision Date Description
K 06/03/19 Added LEMO connector diagram
L 06/14/19 Updated interconnect drawings
M 10/15/19 Added various updates to Section 3 Installation Procedures
N 01/17/20 Added PMA unit info
P 12/21/20 Corrected Figure D-2
190-01553-00 GTR 200/200B Installation Manual
Rev. P Page i
CURRENT REVISION DESCRIPTION
INFORMATION SUBJECT TO EXPORT CONTROL LAWS
This document may contain information which is subject to the Export Administration Regulations
("EAR") issued by the United States Department of Commerce (15 CFR, Chapter VII, Subchapter C) and
which may not be exported, released, or disclosed to foreign nationals inside or outside of the United States
without first obtaining an export license. The preceding statement is required to be included on any and all
reproductions in whole or in part of this manual.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use
of such marks by Garmin is under license. Other trademarks and trade names are those of their respective
owners.
Revision Page
Number(s)
Section
Number Description of Change
P D-2 Appdx D Removed extra ground symbol from Copilot Headset shield
lines in Figure D-2
190-01553-00 GTR 200/200B Installation Manual
Rev. P Page ii
DEFINITIONS OF WARNINGS, CAUTIONS, AND NOTES
WARNING
This product, its packaging, and its components contain chemicals known to the State of
California to cause cancer, birth defects, or reproductive harm. This Notice is being
provided in accordance with California's Proposition 65. If you have any questions or
would like additional information, please refer to our web site at www.garmin.com/prop65.
CAUTION
The front bezel, keypad, and display can be cleaned with a microfiber cloth or with a soft
cotton cloth dampened with clean water. DO NOT use any chemical cleaning agents.
Care should be taken to avoid scratching the surface of the display.
SOFTWARE LICENSE AGREEMENT
BY USING THE DEVICE, COMPONENT OR SYSTEM MANUFACTURED OR SOLD BY GARMIN
(“THE GARMIN PRODUCT”), YOU AGREE TO BE BOUND BY THE TERMS AND CONDITIONS
OF THE FOLLOWING SOFTWARE LICENSE AGREEMENT. PLEASE READ THIS AGREEMENT
CAREFULLY. Garmin Ltd. and its subsidiaries (“Garmin”) grants you a limited license to use the
software embedded in the Garmin Product (the “Software”) in binary executable form in the normal
operation of the Garmin Product. Title, ownership rights, and intellectual property rights in and to the
Software remain with Garmin and/or its third-party providers. You acknowledge that the Software is the
property of Garmin and/or its third-party providers and is protected under the United States of America
copyright laws and international copyright treaties. You further acknowledge that the structure,
organization, and code of the Software are valuable trade secrets of Garmin and/or its third-party providers
and that the Software in source code form remains a valuable trade secret of Garmin and/or its third-party
providers. You agree not to reproduce, decompile, disassemble, modify, reverse assemble, reverse
engineer, or reduce to human readable form the Software or any part thereof or create any derivative works
based on the Software. You agree not to export or re-export the Software to any country in violation of the
export control laws of the United States of America.
190-01553-00 GTR 200/200B Installation Manual
Rev. P Page iii
TABLE OF CONTENTS
PARAGRAPH PAGE
Section 1 General Description ...........................................................................1-1
1.1 Introduction...................................................................................................................... 1-1
1.2 Equipment Description .................................................................................................... 1-1
1.3 Technical Specifications .................................................................................................. 1-2
1.4 Certification ..................................................................................................................... 1-5
1.5 Reference Documents ...................................................................................................... 1-5
Section 2 Installation Overview.........................................................................2-1
2.1 Introduction...................................................................................................................... 2-1
2.2 Unit Configurations ......................................................................................................... 2-1
2.3 Available Accessories...................................................................................................... 2-1
2.4 Installation Considerations .............................................................................................. 2-2
2.5 Antenna Considerations................................................................................................... 2-3
2.6 Mounting Considerations................................................................................................. 2-5
2.7 Cabling and Wiring.......................................................................................................... 2-5
2.8 Air Circulation and Cooling ............................................................................................ 2-7
2.9 Compass Safe Distance.................................................................................................... 2-7
Section 3 Installation Procedures ......................................................................3-1
3.1 Unpacking the unit........................................................................................................... 3-1
3.2 Wiring Harness Installation ............................................................................................. 3-1
3.3 Backshell Assembly......................................................................................................... 3-2
3.4 Mounting Requirements .................................................................................................. 3-2
3.5 Antenna Installation and Connections ............................................................................. 3-3
3.6 Post Installation Configuration and Checkout Procedures .............................................. 3-4
3.7 Unit Software................................................................................................................. 3-20
3.8 Disabling Bluetooth® .................................................................................................... 3-23
3.9 Continued Airworthiness ............................................................................................... 3-23
Section 4 Connector Pinout Information..........................................................4-1
4.1 Pin Function List.............................................................................................................. 4-1
4.2 Power ............................................................................................................................... 4-2
4.3 Lighting Bus .................................................................................................................... 4-2
4.4 CAN Bus.......................................................................................................................... 4-3
4.5 Unit ID ............................................................................................................................. 4-3
4.6 Serial Data – RS-232 ....................................................................................................... 4-4
4.7 MIC Audio....................................................................................................................... 4-4
4.8 Aux Mono Audio ............................................................................................................. 4-5
4.9 Headset Audio.................................................................................................................. 4-5
4.10 Music Inputs .................................................................................................................. 4-5
190-01553-00 GTR 200/200B Installation Manual
Rev. P Page iv
PARAGRAPH PAGE
4.11 Receiver Audio .............................................................................................................. 4-6
4.12 Pilot/Copilot PTT Inputs................................................................................................ 4-6
4.13 TX Interlock................................................................................................................... 4-6
4.14 Discrete Inputs ............................................................................................................... 4-7
Appendix A Shield Block Connector Installation Instructions .....................A-1
A.1 Shield Block Installation Parts....................................................................................... A-1
A.2 Shield Termination Technique – Method A.1 (Standard) ............................................. A-3
A.3 Shield Termination Technique - Method A.2 (Daisy Chain) ........................................ A-7
A.4 Shield Termination – Method B.1 (Quick Term) .......................................................... A-7
A.5 Shield Termination-Method B.2 (Daisy Chain-Quick Term)........................................ A-9
A.6 Daisy Chain between Methods A and B ...................................................................... A-10
A.7 Splicing Signal Wires .................................................................................................. A-10
Appendix B Serial Interface Specifications.....................................................B-1
B.1 Electrical Interface ..........................................................................................................B-1
B.2 Message Formats.............................................................................................................B-1
Appendix C Outline and Installation Drawings .............................................C-1
Appendix D Interconnect Examples ................................................................D-1
190-01553-00 GTR 200/200B Installation Manual
Rev. P Page v
LIST OF FIGURES
FIGURE PAGE
Section 1 General Description ...........................................................................1-1
Section 2 Installation Overview.........................................................................2-1
Figure 2-1 CAN Bus Configuration...................................................................................... 2-6
Section 3 Installation Procedures ......................................................................3-1
Figure 3-1 GTR 200/200B Front Panel ................................................................................ 3-4
Figure 3-2 Configuration Mode Home Page ........................................................................ 3-5
Figure 3-3 COM Setup Page................................................................................................. 3-7
Figure 3-4 ICS Sidetone Selection........................................................................................ 3-7
Figure 3-5 MON Swap Selection.......................................................................................... 3-8
Figure 3-6 Audio Setup Page (AUX and Music Disabled) .................................................. 3-9
Figure 3-7 Audio Setup Page (AUX and Music Enabled).................................................... 3-9
Figure 3-8 Softkey Setup Page ........................................................................................... 3-10
Figure 3-9 Discrete Setup Page .......................................................................................... 3-11
Figure 3-10 Lighting Setup Page ........................................................................................ 3-12
Figure 3-11 Lighting Graph................................................................................................ 3-13
Figure 3-12 RS-232 Status Page......................................................................................... 3-13
Figure 3-13 Headset Tests Page.......................................................................................... 3-14
Figure 3-14 COM Tests Page ............................................................................................. 3-15
Figure 3-15 Audio Tests Page ............................................................................................ 3-16
Figure 3-16 About Page...................................................................................................... 3-20
Figure 3-17 Software Update Page..................................................................................... 3-20
Figure 3-18 Micro SD Insertion.......................................................................................... 3-21
Figure 3-19 Software Update Page - Scanning Card.......................................................... 3-21
Figure 3-20 Software Update Page - No Update Found..................................................... 3-22
Figure 3-21 Software Update Page - Update Software?..................................................... 3-22
Figure 3-22 Software Update Page - Preparing Update...................................................... 3-22
Figure 3-23 Software Update Page - Unit Will Reboot...................................................... 3-22
Section 4 Connector Pinout Information..........................................................4-1
Figure 4-1 J2001 Looking at rear of unit .............................................................................. 4-1
Figure 4-2 CAN Bus Termination for GTR 200/200B......................................................... 4-3
Appendix A Shield Block Connector Installation Instructions.....................A-1
Figure A-1 Shield Block Install onto a Backshell .............................................................. A-2
Figure A-2 Method A.1 for Shield Termination................................................................. A-3
Figure A-3 Insulation/Contact Clearance ........................................................................... A-5
Figure A-4 Method A.2 (Daisy Chain) for Shield Termination ......................................... A-7
190-01553-00 GTR 200/200B Installation Manual
Rev. P Page vi
FIGURE PAGE
Figure A-5 Method B.1 (Quick Term) for Shield Termination .......................................... A-8
Figure A-6 Method B.2 (Daisy Chain-Quick Term) for Shield Termination..................... A-9
Figure A-7 Daisy Chain between Methods A and B ........................................................ A-10
Figure A-8 D-Sub Spliced Signal Wire illustration.......................................................... A-11
Appendix B Serial Interface Specifications ....................................................B-1
Appendix C Outline and Installation Drawings .............................................C-1
Figure C-1 GTR 200/200B Outline Drawing .......................................................................C-1
Figure C-2 GTR 200/200B Assembly Drawing ...................................................................C-2
Figure C-3 GTR 200/200B Installation Drawing .................................................................C-3
Figure C-4 GTR 200/200B Panel Cutout Drawing ..............................................................C-4
Appendix D Interconnect Examples ................................................................D-1
Figure D-1 GTR 200/200B Interconnect Example Notes ................................................... D-1
Figure D-2 GTR 200/200B- Power & Ground/Intercom/GDU 37X/46X CAN
Bus Interconnect Example .................................................................................................... D-2
Figure D-3 GTR 200/200B- Power & Ground/Intercom/GDU 37X RS-232
Interconnect Example ........................................................................................................... D-3
Figure D-4 GTR 200/200B- Power & Ground/GMA 240/GNS 430/aera 79X
Interconnect Example ........................................................................................................... D-4
Figure D-5 GTR 200/200B- Mono Audio/Remote Mount Jack Interconnect Example...... D-5
Figure D-6 GTR 200/200B CAN Bus Interconnect Drawing ............................................. D-6
Figure D-7 Dual GTR 200/200B200/200B GMA 240 Interconnect Drawing .................... D-7
Figure D-8 LEMO Jack Interconnect Drawing ................................................................... D-8
Figure D-9 GTR 200/200B - J2001 Connector Layout ....................................................... D-9
190-01553-00 GTR 200/200B Installation Manual
Rev. P Page vii
LIST OF TABLES
TABLE PAGE
Section 1 General Description ...........................................................................1-1
Table 1-1 Available Units..................................................................................................... 1-1
Table 1-2 Physical Characteristics........................................................................................ 1-2
Table 1-3 General Specifications.......................................................................................... 1-2
Table 1-4 Display Specifications .......................................................................................... 1-3
Table 1-5 COM Transmitter Specifications.......................................................................... 1-3
Table 1-6 COM Receiver Specifications .............................................................................. 1-4
Table 1-7 FCC Grant of Equipment Authorization .............................................................. 1-5
Table 1-8 Reference Documents........................................................................................... 1-5
Section 2 Installation Overview.........................................................................2-1
Table 2-1 Catalog Part Numbers .......................................................................................... 2-1
Table 2-2 Standard Kit Accessories...................................................................................... 2-1
Table 2-3 Contents of Connector Kit (011-03240-00), see Figure C-2................................ 2-2
Table 2-4 Optional Accessories............................................................................................ 2-2
Section 3 Installation Procedures ......................................................................3-1
Table 3-1 Recommended Crimp Tools (or Equivalent) ....................................................... 3-1
Table 3-2 Socket Contact Part Numbers............................................................................... 3-1
Table 3-3 Configuration Default Settings............................................................................. 3-6
Table 3-4 COM Setup Page Selections................................................................................. 3-7
Table 3-5 Audio Setup Page Selections................................................................................ 3-9
Table 3-6 Softkey Setup Page Selections ........................................................................... 3-10
Table 3-7 Discrete Setup Page Selections .......................................................................... 3-11
Table 3-8 Lighting Setup Page Selections .......................................................................... 3-12
Table 3-9 Audio Tests Source Selections ........................................................................... 3-16
Table 3-10 Discrete Inputs.................................................................................................. 3-17
Table 3-11 TX Interlock Connections ................................................................................ 3-18
Section 4 Connector Pinout Information..........................................................4-1
Table 4-1 J2001 Connector................................................................................................... 4-1
Appendix A Shield Block Connector Installation Instructions ....................A-1
Table A-1 Parts not supplied for a Shield Block Installation (Figure A-1)......................... A-1
Table A-2 Shielded Cable Preparations for Garmin Connectors......................................... A-3
Table A-3 Shielded Cable Preparations – (Quick Term)..................................................... A-9
Appendix B Serial Interface Specifications ....................................................B-1
Appendix C Outline and Installation Drawings ............................................C-1
Appendix D Interconnect Examples ...............................................................D-1
190-01553-00 GTR 200/200B Installation Manual
Rev. P Page 1-1
1 GENERAL DESCRIPTION
1.1 Introduction
This manual is intended to provide mechanical and electrical information for use in the planning and
design of an installation of the GTR 200/200B into an aircraft. This manual is not a substitute for an
approved airframe-specific maintenance manual, installation design drawing, or complete installation data
package. Attempting to install equipment by reference to this manual alone and without first planning or
designing an installation specific to your aircraft may compromise your safety and is not recommended.
1.2 Equipment Description
CAUTION
The GTR 200/200B has a display that is coated with a special anti-reflective coating that
is very sensitive to waxes and abrasive cleaners. CLEANERS CONTAINING AMMONIA
WILL HARM THE ANTI-REFLECTIVE COATING. It is very important to clean the
display using a clean, lint-free cloth and an eyeglass lens cleaner that is specified as safe
for anti-reflective coatings.
CAUTION
The use of ground-based cellular telephones while aircraft are airborne is prohibited by
FCC rules. Due to potential interference with onboard systems, the use of ground-based
cell phones while the aircraft is on the ground is subject to FAA regulation 14 CFR §91.21.
FCC regulation 47 CFR §22.925 prohibits airborne operation of ground-based cellular
telephones installed in or carried aboard aircraft. Ground-based cellular telephones must
not be operated while aircraft are off the ground. When any aircraft leaves the ground, all
ground-based cellular telephones on board that aircraft must be turned off. Ground-based
cell phones that are on, even in a monitoring state, can disrupt GPS/SBAS performance.
NOTE
All screen shots used in this document are current at the time of publication. Screen shots
are intended to provide visual reference only. All information depicted in screen shots,
including software file names, versions, and part numbers, is subject to change and may
not be up to date.
Table 1-1 Available Units
Model Part Number TX Power
(Watt)
8.33 KHz
Spacing
25 KHz
Spacing
GTR 200
with Serial Number Prefix 2QQ 011-02980-00 10 N/A Yes
GTR 200
with Serial Number Prefix 5JC 011-02980-10 10 N/A Yes
GTR 200B
with Serial Number Prefix 5JD 011-02980-20 10 N/A Yes
GTR 200B FAA-PMA
with Serial Number Prefix 5JD 011-02980-40 10 N/A Yes
This manual suits for next models
1
Table of contents
Other Garmin Transceiver manuals
Garmin
Garmin GNT 10 User manual
Garmin
Garmin AIS 600 User manual
Garmin
Garmin AIS 300 Reference guide
Garmin
Garmin GTR 200 User manual
Garmin
Garmin AIS 600 Reference guide
Garmin
Garmin Apollo SL40 Manual
Garmin
Garmin SL30 GNS 480TM Manual
Garmin
Garmin EDGE 840 User manual
Garmin
Garmin Apollo SL40 User manual
Garmin
Garmin GDL 88H Technical specifications
Garmin
Garmin GNC 255A Manual
Garmin
Garmin GTR 225 User manual
Garmin
Garmin GDL 88 Manual
Garmin
Garmin GTR 225 User manual
Garmin
Garmin GNC 250 Operating instructions
Garmin
Garmin echomap 40 series Manual
Garmin
Garmin GTR 200 Manual
Garmin
Garmin AIS 800 User manual
Garmin
Garmin Apollo SL40 User manual
Garmin
Garmin GNC400 Manual
