Garmin VIEO RV 751 Instruction manual
VIEO™RV 751
Quick Start Manual 2
Manuel de démarrage rapide 8
Guía de inicio rápido 15
Vieo™ RV 751
Quick Start Manual
Getting Started
WARNING
See the Important Safety and Product Information guide in the product box for
product warnings and other important information.
Display Overview
Microphone for voice recognition
Volume control
Power key
micro USB power and data port
microSD® memory card slot
3.5 mm audio jack
Magnetic mount interface with 14-pin connector
Speaker
2 Quick Start Manual
EN
Dock Overview
Magnetic dock for the Vieo™ RV 751 display. Charges the display and sets the
display user interface to docked mode.
Power. Hold to turn the system on or off.
Volume up
Volume down
Mute
• Select to skip to the previous or next track, when using an applicable source.
• Hold to rewind or fast forward the current track, when using an applicable
source.
• AM or FM source:
◦ Select to tune to the previous or next station.
◦ Hold for faster tuning (manual mode only).
• Aux 1 or Aux 2 source: Select to decrease or increase the gain for the connected
source.
• SiriusXM source: Select to change to the previous or next channel.
• Select to pause or resume.
• AM or FM source:
◦ Select to move through the tuning modes: auto, manual, and presets (when
two or more presets are saved).
◦ Hold to save this station as a preset.
• SiriusXM source: Select to move through the tuning modes (auto and presets),
when you have at least one preset channel.
Select to change the audio source.
Docking the Display
The display provides a touchscreen interface for the infotainment system. It can
control the system while docked or undocked.
1Place the bottom edge of the display into the dock.
2Tilt the top of the display toward the dock until the magnets pull the remote
into the correct position.
The dock charges the display. in the status bar indicates the battery charge
level.
Undocking the Display
1Tilt the display toward you by pressing the bottom edge of the display inward
while pulling the top edge of the display toward you.
This method keeps the bottom of the display seated in the dock and helps to
prevent dropping the display.
2After the display releases from the magnet, carefully remove the display from
the mount.
Home Screen
NOTE: The home screen layout may vary if it has been customized.
Quick Start Manual 3
EN
Swipe down to view notifications.
Swipe down twice to quickly change the settings and backlight brightness.
Hold to customize the wallpaper or add widgets to the home screen.
Select to open the app drawer. The app drawer contains shortcuts to all of the apps
installed on your device.
Select media controls to turn the stereo on or off, change stations, change volume,
and mute the stereo.
Adjusting the Screen Brightness
The device can use an ambient light sensor to adjust the screen brightness to
your vehicle conditions automatically. You can also adjust the brightness
manually, using either the notification panel or the settings menu.
1Select an option:
• Swipe down twice from the top of the screen to expand the quick settings
in the notification panel.
• Select > > > Display > Brightness Level.
2Use the slider bar to adjust the brightness.
Acquiring GPS Signals
1Turn on the device.
2Verify appears in the status bar, and enable location services if it does not.
3If necessary, go to an open area with a clear view of the sky, away from tall
buildings and trees.
Acquiring Satellites appears at the top of the navigation map until the device
determines your location.
Live Services, Traffic, and Smartphone Features
The Garmin Drive™ app allows your device to receive smart notifications and live
information, such as live traffic data and weather information.
Live traffic data: Sends real-time traffic data to your device, such as traffic
incidents and delays, construction zones, and road closings.
Weather information: Sends real-time weather forecasts, road conditions, and
weather radar to your device.
Smart Notifications: Displays phone notifications and messages on your device.
This feature is not available for all languages.
Send locations to device: Allows you to send locations from your smartphone to
your navigation device.
Pairing with Your Smartphone
You can pair your Vieo RV 751 device with your smartphone and the Garmin
Drive app to enable additional features and access live information.
1From the app store on your smartphone, install the Garmin Drive app.
2Turn on your Vieo RV 751 device, and place the device and your smartphone
within 3 m (10 ft.) of each other.
3On your phone, open the Garmin Drive app.
4Follow the on-screen instructions to sign in to a Garmin account and
complete the pairing and setup process.
The main app dashboard appears. After the devices are paired, they connect
automatically when they are turned on and within range.
Tips After Pairing the Devices
• After the initial pairing, the two devices can connect automatically each time
you turn them on.
4Quick Start Manual
EN
• When you turn on the device, it tries to connect to the last phone to which it
was connected.
• You might need to set your phone to connect to the device automatically
when the device is turned on.
• You should verify the Bluetooth® features you want to use are enabled.
Pairing Additional Bluetooth Devices
1Place your headset or phone and your Bluetooth device within 33 ft. (10 m) of
each other.
2On your device, enable Bluetooth wireless technology.
3On your headset or phone, enable Bluetooth wireless technology and ensure
it is visible to other Bluetooth devices.
4On your device, select > > > Bluetooth.
A list of nearby Bluetooth devices appears.
5Select your headset or phone from the list.
6If necessary, select Pair.
Connecting a Compatible Bluetooth Device
You can play media from a compatible Bluetooth device using the Bluetooth
wireless connection.
1From the music app, select the BT source.
2Select > DISCOVERABLE to make the stereo visible to your compatible
Bluetooth device.
NOTE: The stereo is discoverable for only two minutes to prevent interruption
to audio streaming over Bluetooth wireless. If more than two minutes pass
before you connect a compatible device, you must repeat this step.
3Enable Bluetooth on your compatible Bluetooth device.
4Bring the compatible Bluetooth device within 10 m (33 ft.) of the stereo.
5On your compatible Bluetooth device, search for Bluetooth devices.
6Select the stereo from the list of detected devices.
7Follow the on-screen instructions to pair and connect to the discovered
stereo.
When pairing, your compatible Bluetooth device may ask you to confirm a
code on the stereo. The stereo does not display a code, but it does connect
correctly when you confirm the message on the Bluetooth device.
8If your compatible Bluetooth device does not immediately connect to the
stereo, repeat steps 1 through 7.
Hands-Free Calling
NOTE: While most phones and headsets are supported and can be used, a
particular phone or headset cannot be guaranteed to be compatible. All features
may not be available for your phone.
Using Bluetooth wireless technology, your device can connect to your compatible
mobile phone and wireless headset or helmet to become a hands-free device. To
check compatibility, go to www.garmin.com/bluetooth.
Placing a Call
1Select .
2Select an option:
• To dial a number, select , enter the phone number, and select .
• To view numbers of recent, missed, or recently dialed or received calls,
select , select a log, and select a number to dial it.
• To call a contact from your phone book, select , and select a contact.
Receiving a Call
When you receive a call, select Answer or Decline.
Playing Media
When you play media, the dock operates as the stereo. The display operates as
the stereo remote control.
1From the media controls on the home screen, select a source .
Quick Start Manual 5
EN
2Select a source.
3If necessary, select a song or station.
Playing Media from a USB Device
You can play media from a connected USB flash drive, smartphone, or
compatible portable media device.
1Locate the media USB port in your vehicle.
2Connect the USB device to the USB port.
3Select > > .
4Select the source icon.
5Select an option:
• To play media from an Apple device, select iPod.
• To play media from a smartphone or device with Android, select MTP.
• To play media from another portable media player or USB flash drive,
select USB.
Changing the Radio Station
1Select an applicable source, such as FM.
2Select repeatedly to move through the tuning modes, and select an
option:
• Select Auto to scan and stop on the next available station.
• Select Manual to select a station manually.
• Select Preset to select a saved station preset.
3Select or to tune to the station.
While in Manual tuning mode, you can hold or to quickly advance
through the stations.
TIP: While an applicable source such as FM is selected, you can change
stations by selecting the media controls on the home screen or the controls
on the dock.
SiriusXM Satellite Radio
Only SiriusXM brings you more of what you love to listen to, all in one place. Get
over 140 channels, including commercial-free music plus the best sports, news,
talk, comedy and entertainment. Welcome to the world of satellite radio. A
SiriusXM Vehicle Tuner and subscription are required. For more information, go
to www.siriusxm.com.
To learn more about activation or operation of the SiriusXM tuner, see the Vieo
RV 751 Owner's Manual.
Navigation
Finding a Location by Category
1Select .
2Select a category, or select Categories.
3If necessary, select a subcategory.
4Select a location.
Finding an Address
NOTE: The order of the steps may change depending on the map data loaded on
your device.
1Select .
2If necessary, select to search near a different city or area.
3Select Address.
4Follow the on-screen instructions to enter address information.
6Quick Start Manual
EN
5Select the address.
Changing the Search Area
By default, the device searches near your current location. You can also search
other areas, such as near your destination, near another city, or along your active
route.
1Select .
2Select .
3Select an option.
Starting a Route
1Select , and search for a location (page 6).
2Select a location.
3Select Go!.
Your Route on the Map
As you travel, the device guides you to your destination using voice prompts and
information on the map. Instructions for your next turn or exit, or other actions
appear across the top of the map.
Next action in the route. Indicates the next turn, exit, or other action and the lane in
which you should travel, if available.
Distance to the next action.
Name of the street or exit associated with the next action.
Route highlighted on the map.
Next action in the route. Arrows on the map indicate the location of upcoming actions.
Vehicle speed.
Name of the road on which you are traveling.
Estimated arrival time.
TIP: You can touch this field to change the information it shows.
Map tools. Provides tools to show you more information about your route and
surroundings.
Adding a Location to Your Route
Before you can add a location to your route, you must be navigating a route.
You can add locations to the middle or end of your route. For example, you can
add a fuel station as the next destination in your route.
1From the map, select > .
2Search for a location (page 6).
3Select a location.
4Select Go!.
5Select an option:
• To add the location as the next destination in your route, select Add as
Next Stop.
• To add the location to the end of your route, select Add as Last Stop.
• To add the location and edit the order of destinations in your route, select
Add to Active Route.
The device re-calculates the route to include the added location and guides you
to the destinations in order.
Quick Start Manual 7
EN
Stopping a Route
From the map, select > Stop.
Device Information
Viewing E-label Regulatory and Compliance Information
1From the settings menu, swipe to the bottom of the menu.
2Select Device > Regulatory information.
Display Specifications
General
Operating temperature
range
From -20 to 55°C (from -4 to 131°F)
Storage temperature range From 0 to 45°C (from 32 to 113°F)
Radio frequency/protocol Wi‑Fi 2.4 GHz @ +15 dBm nominal
Power input Vehicle power using the included vehicle power cable. AC
power using an optional accessory (for home and office use
only).
Battery type Rechargeable lithium-ion
More Information
Getting the Owner's Manual
The owner's manual includes instructions for using device features and
accessing regulatory information.
Go to garmin.com/manuals/VieoRV751.
Garmin Support Center
Go to support.garmin.com for help and information, such as product manuals,
frequently asked questions, videos, and customer support.
Product Updates
On your computer, install Garmin Express (www.garmin.com/express).
This provides easy access to these services for Garmin devices:
• Software updates
• Map updates
• Product registration
Vieo™ RV 751
Manuel de démarrage rapide
Mise en route
AVERTISSEMENT
Consultez le guide Informations importantes sur le produit et la sécurité inclus
dans l'emballage du produit pour prendre connaissance des avertissements et
autres informations importantes sur le produit.
Aperçu de l'écran
8 Manuel de démarrage rapide
FR
Microphone pour la reconnaissance vocale
Contrôle du volume
Bouton Marche/Arrêt
Port micro-USB d'alimentation et de données
Lecteur de carte mémoire microSD
Prise jack audio 3,5 mm
Interface de montage magnétique avec connecteur 14 broches
Haut-parleur
Aperçu du socle
Socle magnétique pour l'écran Vieo RV 751. Permet de charger l'écran et de passer
l'interface utilisateur de l'écran en mode Sur socle.
Marche/Arrêt. Maintenez ce bouton enfoncé pour allumer ou éteindre le système.
Hausse du volume
Baisse du volume
Désactiver le son
• Appuyez sur cette touche pour passer à la piste précédente ou suivante, lorsque
la source applicable est utilisée.
• Maintenez cette touche enfoncée pour revenir en arrière ou avancer dans la
piste en cours, lorsque la source applicable est utilisée.
• Source AM ou FM :
◦ Appuyez sur cette touche pour atteindre la station précédente ou suivante.
◦ Maintenez cette touche enfoncée pour parcourir les stations plus rapidement
(mode manuel uniquement).
• Source Aux 1 ou Aux 2 : appuyez sur ces touches pour réduire ou augmenter la
sensibilité de la source connectée.
• Source SiriusXM : appuyez sur cette touche pour passer au canal précédent ou
suivant.
Manuel de démarrage rapide 9
FR
• Appuyez sur cette touche pour mettre pause ou reprendre la lecture.
• Source AM ou FM :
◦ Appuyez sur cette touche pour parcourir les modes de réception radio : auto-
matique, manuel et stations préréglées (à condition qu'au moins deux stations
préréglées aient été enregistrées).
◦ Maintenez cette touche enfoncée pour enregistrer cette station dans les
stations préréglées.
• Source SiriusXM : appuyez sur cette touche pour parcourir les modes de
réception (automatique et stations préréglées), lorsqu'au moins une station a été
préréglée.
Sélectionnez cette touche pour modifier la source audio.
Installation de l'écran sur le socle
L'écran fournit une interface tactile pour le système d'infotainment. Il permet de
contrôler le système qu'il soit posé ou non sur le socle.
1Placez le bas de l'écran sur le socle.
2Inclinez le haut de l'écran en direction du socle, jusqu'à ce que les aimants
l'attirent et le placent dans la bonne position.
Le socle recharge l'écran. dans la barre d'état indique le niveau de charge de
la batterie.
Retrait de l'écran du socle
1Inclinez l'écran vers vous en appuyant sur le bord inférieur de l'écran et en
tirant le bord supérieur vers vous.
En procédant ainsi, vous vous assurez que le bas de l'écran reste en contact
avec le socle et donc qu'il ne tombera pas.
2Une fois l'écran libéré de l'attraction de l'aimant, retirez-le délicatement du
support.
Ecran d'accueil
REMARQUE : la disposition de l'écran d'accueil peut être différente si vous
l'avez personnalisée.
Faites glisser votre doigt vers le bas pour afficher les notifications.
Balayez deux fois l'écran du haut vers le bas pour modifier rapidement les paramè-
tres et la luminosité du rétroéclairage.
Maintenez votre doigt pour personnaliser le papier peint ou ajouter des widgets à
l'écran d'accueil.
Sélectionnez cette option pour ouvrir le tiroir des applications. Celui-ci contient des
raccourcis vers toutes les applications installées sur l'appareil.
Sélectionnez les commandes multimédias pour allumer ou éteindre la chaîne stéréo,
changer de station, régler le volume et désactiver le son de la chaîne stéréo.
Réglage de la luminosité de l'écran
L'appareil peut utiliser le capteur de luminosité ambiante pour ajuster
automatiquement la luminosité de l'écran à la luminosité de votre véhicule. Vous
pouvez aussi régler la luminosité manuellement à l'aide du panneau de
notification ou du menu des paramètres.
1Sélectionner une option :
• Balayez deux fois l'écran du haut vers le bas pour afficher les paramètres
rapides dans le panneau de notification.
• Sélectionnez > > > Affichage > Niveau de luminosité.
2Réglez la luminosité à l'aide du curseur.
Acquisition de signaux GPS
1Allumez l'appareil.
10 Manuel de démarrage rapide
FR
Table of contents
Languages:
Other Garmin Monitor manuals
Garmin
Garmin TD 50 User manual
Garmin
Garmin TD 50 User manual
Garmin
Garmin GPSMAP 7X3 User manual
Garmin
Garmin GMX 200 User manual
Garmin
Garmin RV FIXED Series User manual
Garmin
Garmin GMX 200 User manual
Garmin
Garmin GPSMAP 16X3 User manual
Garmin
Garmin GMI 20 User manual
Garmin
Garmin HUD Instruction manual
Garmin
Garmin RV User manual
Garmin
Garmin VIEO RV 752 Instruction manual
Garmin
Garmin GNX 130 User manual
Garmin
Garmin SERV User manual
Garmin
Garmin GPSMAP 8400 series User manual
Garmin
Garmin VIEO RV 852 Instruction manual
Garmin
Garmin GPSMAP 9000 Series User manual
Garmin
Garmin SERV User manual
Garmin
Garmin A03985 Instruction manual
