GARCARE GHT06 User manual

Corded Hedge Trimmer

Please read this instruction manual carefully before using the tool !

Model:GHT06

Model:GHT08

Model:GHT12

Explain the symbol

Class II tools symbol

WARNING –To reduce the risk of injury, user must read instruction manual

Remove plug from the mains immediately if cable is damaged or cut.

Do not expose to rain

Danger of electric shock

General Power tool Safety Warnings

WARNING Read all safety warnings and all instructions. Failure to follow the

warnings and instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

The term "power tool" in the warnings refers to your mains-operated (corded) power tool

or battery-operated (cordless) power tool.

1) Work area safety

a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.

b) Do not operate power tools in explosive atmospheres, such as in the presence

of flammable liquids, gases or dust. Power tools create sparks which may ignite the

dust or fumes.

c) Keep children and bystanders away while operating a power tool. Distractions can

cause you to lose control.

2) Electrical safety

a) Power tool plugs must match the outlet. Never modify the plug in any way. Do

not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs

and matching outlets will reduce risk of electric shock.

b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators,

ranges and refrigerators. There is an increased risk of electric shock if your body is

earthed or grounded.

c) Do not expose power tools to rain or wet conditions. Water entering a power tool

will increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging

the power tool. Keep cord away from heat, oil, sharp edges or moving parts.

Damaged or entangled cords increase the risk of electric shock.

e) When operating a power tool outdoors, use an extension cord suitable for

outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

f) If operating a power tool in a damp location is unavoidable, use a residual

current device (RCD) protected supply. Use of an RCD reduces the risk of electric

shock..

3) Personal safety

a) Stay alert, watch what you are doing and use common sense when operating a

power tool. Do not use a power tool while you are tired or under the influence of

drugs, alcohol or medication. Amoment of inattention while operating power tools may

result in serious personal injury.

b) Use personal protective equipment. Always wear eye protection. Protective

equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection

used for appropriate conditions will reduce personal injuries.

c) Prevent unintentional starting. Ensure the switch is in the off-position before

connecting to power source and/or battery pack, picking up or carrying the tool.

Carrying power tools with your finger on the switch or energising power tools that have

the switch on invites accidents.

d) Remove any adjusting key or wrench before turning the power tool on. A wrench

or a key left attached to a rotating part of the power tool may result in personal injury.

e) Do not overreach. Keep proper footing and balance at all times. This enables

better control of the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing

and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught

in moving parts.

g) If devices are provided for the connection of dust extraction and collection

facilities, ensure these are connected and properly used. Use of dust collection can

reduce dust-related hazards.

4) Power tool use and care

a) Do not force the power tool. Use the correct power tool for your application. The

correct power tool will do the job better and safer at the rate for which it was designed.

b) Do not use the power tool if the switch does not turn it on and off. Any power tool

that cannot be controlled with the switch is dangerous and must be repaired.

c) Disconnect the plug from the power source and/or the battery pack from the

power tool before making any adjustments, changing accessories, or storing

power tools. Such preventive safety measures reduce the risk of starting the power tool

accidentally.

d) Store idle power tools out of the reach of children and do not allow persons

unfamiliar with the power tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained users.

e) Maintain power tools. Check for misalignment or binding of moving parts,

breakage of parts and any other condition that may affect the power tool’s

operation. If damaged, have the power tool repaired before use. Many accidents are

caused by poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp

cutting edges are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc. in accordance with these

instructions, taking into account the working conditions and the work to be

performed. Use of the power tool for operations different from those intended could

result in a hazardous situation.

5) Service

Have your power tools serviced by a qualified repair person using only identical

replacement parts. This will ensure that safety of the power tool is maintained.

Hedge trimmer safety warnings

➢Keep all parts of the body away from the cutter blade. Do not remove cut

material or hold material to be cut when blades are moving. Make sure the

switch is off when clearing jammed material. A moment of inattention while

operating the hedge trimmer may result in serious personal injury.

➢Carry the hedge trimmer by the handle with the cutter blade stopped. When

transporting or storing the hedge trimmer always fit the cutting device cover.

Proper handling of the hedge trimmer will reduce possible personal injury from the

cutter blades.

➢Keep cable away from cutting area. During operation the cable may be hidden in

shrubs and can be accidentally cut by the blade.

➢Hold the power tool by insulated gripping surfaces only, because the cutter

blade may contact hidden wiring or its own cord. Cutter blades contacting a “live”

wire may make exposed metal parts of the power tool “live” and could give the

operator an electric shock.

➢Wear hearing protection.

➢Recommend to use a residual current device with a tripping current of 30 mA or less.

➢When cutting, make sure do not touch objects such as wire fences or plants

frame-holder. Doing so can damage the blade beam.

➢Hold the electric hedge trimmer with both hands firmly, with one hand on the rear and

with the other hand on the front handle. Thumb and fingers must firmly embraced.

Residual risks

Even when the tool is used as prescribed it is not possible to eliminate all

residual risk factors. The following hazards may arise in connection with the

tool’s construction and design:

1. Damage to lungs if an effective dust mask is not worn.

2. Damage to hearing if effective hearing protection is not worn.

3. Health defects resulting from vibration emission if the power tool is being used over

longer period of time or not adequately managed and properly maintained.

WARNING!

This machine produces an electromagnetic field during operation.

This field may under some circumstances interfere with active or passive medical

implants. To reduce the risk of serious or fatal injury, we recommend persons with

medical implants to consult their physician and the medical implant manufacturer before

operating this machine.

Specification

Model

Rated Rating

Cutting length

(inch)

Cutting capability

(inch)

GHT06

120V~60Hz 4.2A

5/8

GHT12

120V~60Hz 4.6A

3/4

GHT08

120V~60Hz 4.8A

3/4

Wear hearing and eye protection while operating the power tool.

The declared vibration total value has been measured in accordance with a standard

test method and may be used for comparing one tool with another.

The declared vibration total value may also be used in a preliminary assessment of

exposure.

Warning

The vibration emission during actual use of the power tool can differ from the declared

total value depending on the ways in which the tool is used.

There is the need to identify safety measures to protect the operator that are based on

an estimation of exposure in the actual conditions of use (taking account of all parts of

the operating cycle such as the times when the tool is switched off and when it is

running idle in addition to the trigger time).

Parts Description

Model :GHT06

Model :GHT12

Model:GHT08

Application range

The hedge trimmer should only be used for trimming hedges, bushes and shrubs. Other

use of the trimmer, not included in this manual, could damage the trimmer or seriously

injure the operator.

Before starting the machine

Connection

This hedge trimmer may only be connected to single-phase AC current. Ensure that the

mains voltage is the same as the operating voltage indicated on the rating plate.

Connect the power plug to the coupling of an appropriate extension cord. Form a loop,

push it through the opening in the handle and hook over the cord hook

Starting the machine

Switching on / off

Switching on: Please insert the power plug completely into the socket,press the safety

switch of the front handle and the trigger of the handle with both hands at the same

time.

Switching off: Release one of the safety switch or trigger,the tool will be stopped.

The blade brake makes the blades stop immediately within 0.5 s, the small flash in the

area of the upper ventilation slots is normal and dose not harm to you or the machine.

If you don't need to use the machine ,you'd better unplug the power plug and store the

machine with the supplied safety blade cover.

Adjusting the position of handle, This function just for model GHT08

Press the rotary button on the model GHT08(do not press the trigger ) then rotate the

handle around the main part of the tool, the handle could be adjusted to different

position(-90°-45°0 °90°45°) to suit the right-hand or left-hand persons or to

be held in a comfortable manner. Make sure the rotary button is returned to the lock

position when the handle is adjusted to one position, otherwise, the machine

could not be operated.

Cutting hedges

-First cut the sides from the bottom to the top. Cut the upper part giving it the shape you

prefer, in a straight horizontal form, roof-like or rounded.

-The safety blade has laterally rounded and staggered cutting teeth to reduce danger of

injury. The additional shock protection avoids inconvenient kickback when the blades

come into contact with walls, fences etc.

-If the blades are jammed or blocked by obstacles, switch the motor off immediately,

pull the plug, and then remove the object jamming the blades.

-Caution! Metal obstacles like fences etc. may damage the cutting blades.

-Always make sure to keep the extension cord behind your back and to start cutting the

hedge at the point nearest to the supply socked. Therefore plan your working direction

before staring.

Maintenance and servicing

-Before carrying out any checks or maintenance operations, disconnect the plug from

the electric power supply.

-Check your machine regularly before starting the work.

Damaged cutting blades have to be repaired or exchanged by a qualified service man

before working with the machine.

-After each cutting operation, clean the cutting blade with a soft brush and cloth with

lubricating fluid oil and spray a thin layer of fluid protective oil

-Always keep the ventilation slots in motor housing clean

-Never clean or spray a machine with water. Clean the motor housing only with a moist

cloth and never use detergents or solvents! These could ruin the plastic parts of the

machine. Finally, dry the motor housing carefully.

-Store the machine with the supplied protection cover.

201610

SAVE THIS INSTRUCTION MANUAL AS LONG AS YOU CAN !

Customer Service mail:garcareservice@gmail.com

This manual suits for next models

Other GARCARE Pole Saw manuals

GARCARE

GARCARE GPCS06 User manual

Popular Pole Saw manuals by other brands

Poulan Pro

Poulan Pro 545117550 instruction manual

Husqvarna

Husqvarna 536LiP4 Workshop manual

DeWalt

DeWalt DCPS620 instruction manual

Remington

Remington RM1035P Operator's manual

Echo

Echo PPT-260 - PARTS CATALOG SERIAL NUMBER... parts catalog

Hawksmoor

Hawksmoor LS C13A User instructions

Husqvarna

Husqvarna 327PT5S Operator's manual

Ikra

Ikra IAAS 40-25 operating instructions

Echo

Echo MTA-PP/E Operator's manual

Spear & Jackson

Spear & Jackson S75EC2 Original instruction manual

EINHELL

EINHELL 45.016.53 Original operating instructions

Gardenline

Gardenline FLX-TBS-1 user manual

Poulan Pro

Poulan Pro PP258TP instruction manual

Ryobi

Ryobi RY52004A Operator's manual

Bosch

Bosch UniversalChainPole 18 Original instructions

Makita

Makita DUA301PT2 instruction manual

AL-KO

AL-KO CSA 2020 Translation of the original instructions for use

Remington

Remington BRANCH WIZARD DPS-1 owner's manual