Game Winner PL701GW User manual

Instruction Manual

QUAD-POD 2.0 ACCESSORY KIT

MODEL #: PL701GW

STYLE #: 159105

For parts call our Customer Service Center at 800-450-3343

Business Hours: 8:00 am to 5:00 pm CST | info@huntriversedge.com

GAS/OIL

RATIO

50:1

PARTICIPATING MEMBER

PRODUCT MEETS

INDUSTRY STANDARDS

RECOGNIZED BY

Instruction Manual : QUAD-POD 2.0 ACCESSORY KIT

TABLE OF CONTENTS

Warranty Information ............................................................................................................................................................................................................2

Warnings.....................................................................................................................................................................................................................................3

Parts List......................................................................................................................................................................................................................................4

Assembly Instructions ....................................................................................................................................................................................................... 5-7

Note: Before beginning assembly of product, make sure all parts are present. Compare parts list with package and hardware

contents. If any part is missing or damaged do not attempt to assemble the unit. Contact customer service for replacement

parts.

WARRANTY

RETI oers a one year warranty for all components of the treestand. These warranties apply to the original owner with a proof of purchase. These warranties

begin on the date of purchase by the rst retail consumer and continue for the period specied above. These warranties apply to products that are not modied,

abused or used in a manner that deviates from the product’s intended usage. Minor fading in color is normal and is not covered by warranty. Any corrosion

of painted surfaces that occurs as a result of paint being removed or damaged is also not covered by warranty. RETI oers no other warranty expressed or

implied. Products for which warranty work has been approved must be sent directly to RETI and performed by RETI. To obtain warranty service and/or

replacement instructions, you must obtain prior approval from RETI before shipping your package to us by calling our customer service department

at 800-450-3343 or by writing to: RETI, P.O. Box 755, 1160 Eighth Avenue, Cumberland, WI 54829 for a return material authorization number (RMA#).

All items must be shipped prepaid. RETI will, at no charge, repair or replace, in RETI’s sole discretion, any product that satises the conditions stated above.

RETI retains the right to change models, specications and price without notice.

This equipment has been manufactured under strict quality and safety guidelines. As with any equipment of this type, full understanding of the instructions and

its use is mandatory and imperative for the safety of its user. RETI is not responsible for any damages or injuries sustained due to improper use or modication

of any of its products, or resulting from any use which deviates from the product’s intended usage. RETI is not responsible for any injuries sustained due to

failure to read and adhere to the instructions for use. Any misunderstanding or questions regarding the products of their use should be directed to RETI prior

to any use. It is the owner’s sole responsibility to inspect the product regularly for damage, improper installation, or conditions that could jeopardize the

ultimate safety of the product. Owner is responsible to understand and follow product eld weight rating and must never exceed maximum weight

rating. RETI is not responsible for any malfunction or injury resulting from normal wear and tear, damage caused by improper use, improper maintenance,

negligence or accidents. This product, if used safely as intended, will provide trouble free service for the useful life of the product. We hope you will enjoy the

quality of our products for years to come, and have a safe hunt.

PAGE

Instruction Manual : QUAD-POD 2.0 ACCESSORY KIT

WARNING

When hunting from a treestand falls can occur any time

after leaving the ground causing injury or death.

Read and understand all of the manufacturer’s Warnings

and Instructions and use all safety devices provided by the

manufacturer. Contact the manufacturer for any questions.

Failure to do so could result in injury or death.

Never allow the material to cover your face. This material can

cause suocation and death if it is placed over face.

Never allow children to play in this product.

Only use approved RETI parts. Failure to do so may result in

serious injury or death!

Never modify in any way by making repairs, replacing parts,

or altering it except if explicitly authorized in writing by the

manufacturer.

WARNING

Assemble this accessory kit to Quad-Pod 2.0 tower at

ground level before attaching the legs.

Ultraviolet light breaks down lightweight fabric bers. The

material will fade, lose strength and eventually disintegrate if

left in prolonged sunlight. To extend the life of your blind,

avoid leaving it out in direct sunlight for extended periods

of time. Set it up in a shady area whenever possible. Fading or

discoloring of blind is not covered under your warranty.

Double check assembly steps to be certain you have correctly

assembled this product.

Keep all ame and heat sources away from this fabric.

This product is not reproof. The fabric will burn if left in

continuous contact with a ame source.

Heat sources burn oxygen and emit carbon monoxide. Use

caution with heaters and vent properly.

READ AND UNDERSTAND THE FOLLOWING WARNINGS BEFORE ASSEMBLY

STOP

Instruction Manual : QUAD-POD 2.0 ACCESSORY KIT

PARTS LIST

Item Part No. Description Image Qty

1 # 32216 SEWN CURTAIN 1

2 # 32217 SEWN ROOF 1

3 # 32325 SPLIT SUPPORT

POLE 1

4 #32326

SPLIT SUPPORT

POLE WITH

POCKET

5 #32327 SUPPORT POLE

WITH NO POCKET 1

6 # 32328 SUPPORT POLE

WITH POCKET 1

Instruction Manual : QUAD-POD 2.0 ACCESSORY KIT

ASSEMBLY INSTRUCTIONS

NOTE: Assemble this accessory kit to Game Winner Quad-Pod

2.0 at ground level before attaching legs.

1. Slide the pocket end of the two split support poles with

pockets (4) onto the split support pole (3). SEE FIGURE 1.

Slide the split support pole (3) into the plastic insert on

the shooting rail in the corner of the blind opposite the

entry opening. SEE FIGURE 1 AND FIGURE 1A.

Then, slide the two split support poles with pockets (4)

into the plastic inserts on both sides of the entry opening.

SEE FIGURE 1 AND FIGURE 1A.

FIGURE 1

FIGURE 1A

FIGURE 2

STEP 1

STEP 2

2. Slide the pocket end of the support pole with pocket (6)

onto the support pole with no pocket (5). SEE FIGURE 2.

Slide each support pole (5, 6) into the remaining plastic

inserts on the shooting rail. SEE FIGURE 2 AND FIGURE

1A.

PLASTIC

INSERT

Instruction Manual : QUAD-POD 2.0 ACCESSORY KIT

3. Attach the curtain (1) to the quad-pod frame by aligning

the zipper to the center of the entry opening. Begin

securing it by attaching the top edge by wrapping the

hook and loop strips around the shooting rail. SEE FIGURE

3A. Work your way around the shooting rail and back to

the zipper. Make adjustments as needed. SEE FIGURE 3.

Attach the bottom edge of the curtain to the platform

by tying the webbing strips to the outer perimeter of the

platform. SEE FIGURE 3B.

STEP 3

FIGURE 3

FIGURE 3A

ZIPPER

FIGURE 3B

Instruction Manual : QUAD-POD 2.0 ACCESSORY KIT

4. Attach the roof (2) to the quad-pod and roof frame by

draping it over the top of the assembled frame and adjust

until the corners are lined up with the roof poles. SEE

FIGURE 4.

Begin securing it by attaching the bottom edge to the

shooting rail by wrapping the hook and loop strips around

it. SEE FIGURE 4A.

Next, attach the center of the roof to the roof poles where

they intersect in the middle with the hook and loop strip.

SEE FIGURE 4B.

Then, attach each corner of the roof to each corner of the

roof poles by wrapping the hook and loop strips around

the roof poles near each corner bend. SEE FIGURE 4C.

Lastly, tension the roof by wrapping the ve d-ring straps

around the shooting rail and pulling tight. SEE FIGURE

4D.

NOTE: Do not over tension. Only take the slack out of the

panel.

STEP 4

FIGURE 4

FIGURE 4A

FIGURE 4C

FIGURE 4B

FIGURE 4D

*All weights, specications and features are approximate and are subject to change without notice. Due to continuous product improvements, product images may not be exact. Warning labels in some product