Galaxy Audio RM-RDSTNR User manual
Included Components
1. AM/FM RDS Tuner x1
3. FM Antenna Wire x1
4. Dual RCA Cable x1
5. AC Power Cord x1
6. Remote Control x1
7. Quick Start Guide x1
1.
2.
7.
2. AM Antenna Set x1 1. Rack Screws 10/32 x .75",
Phillips Truss Head Screws
2. #2 Phillips Head Screwdriver
1.
2.
What May be Needed to Rack
(Not Included)
Racking/Mounting (Optional)
Setup
Operation
6.
3.
4.
5.
1
Connect Power Cable to the
RM-RDSTNR. Connect the other end to
a power outlet. (Optional DC 13.2 Power
Cable may also be used)
2
Attach the AM and/or FM Antenna on
the RM-RDSTNR.
3
Make sure the volume is reduced until
ready for sound. Connect RCA Cable to
the Left and Right RCA Outputs and
connect to Amplifier, Mixer, or Receiver.
4
Power on the RM-RDSTNR Tuner.
1
To Select FM 1, FM 2 or AM frequencies,
Press “BAND”.
3
To start auto scan search, hold TUNING
for over 2 seconds.
4
6 7
8 9
To use Sleep function, press “SLEEP”
on the Remote. (Every press adds
10 min, with 90 min being max.)
5
Align RDS Tuner up evenly. Turn the
screw but leave room to adjust. Once
all four screws are in place, tighten
securely.
5
10
To cancel Sleep, press “SLEEP” until
the LCD shows “00”.
2
Press “TUNING ” or “TUNING ”
to select channel.
GAL A X Y AUDIO Quick Start Guide
RM-RDSTNR
AM / FM RDS Tuner
OR
OR OR
To set a memory CH, press “MEMORY”
then press “1~5”, then Memory again.
(10 memory assignable per freq. band)
To choose Mono or Stereo mode, Press
“MO / ST”.
To set above 5, press , then Memory
“+5”, then “1~5” and press Memory
again. Ex: “+5” and “3” to set it at CH8.
To listen to a saved CH, press
“MEMORY UP” or “M1~M5”. To select
higher, use “+5” and “M1~M5”.
Ex: “+5” and “M3” = CH8.
To search and go to a travel/traffic
station (if available in area), press TA.
Included Components
1. AM/FM RDS Tuner x1
3. FM Antenna Wire x1
4. Dual RCA Cable x1
5. AC Power Cord x1
6. Remote Control x1
7. Quick Start Guide x1
1.
2. 6.
5.
2. AM Antenna Set x1 1. Rack Screws 10/32 x .75",
Phillips Truss Head Screws
2. #2 Phillips Head Screwdriver
1.
2.
What May be Needed to Rack
(Not Included)
Racking/Mounting (Optional)
Setup
Operation
3.
4.
1
Connect Power Cable to the
RM-RDSTNR. Connect the other end to
a power outlet. (Optional DC 13.2 Power
Cable may also be used)
2
Attach the AM and/or FM Antenna on
the RM-RDSTNR.
3 4
Power on the RM-RDSTNR Tuner.
1
To Select FM 1, FM 2 or AM frequencies,
Press “BAND”.
3
To start auto scan search, hold TUNING
for over 2 seconds.
9
To use Sleep function, press “SLEEP”
on the Remote. (Every press adds
10 min, with 90 min being max.)
5
Align RDS Tuner up evenly. Turn the
screw but leave room to adjust. Once
all four screws are in place, tighten
securely.
10
To cancel Sleep, press “SLEEP” until
the LCD shows “00”.
2
Press “TUNING ” or “TUNING ”
to select channel.
GAL AX Y AUDIO Quick Start Guide
RM-RDSTNR
AM / FM RDS Tuner
OR
OR OR
7.
3
Make sure the volume is reduced until
ready for sound. Connect RCA Cable to
the Left and Right RCA Outputs and
connect to Amplifier, Mixer, or Receiver.
4
6 7
8
5
GAL AX Y AUDIO Quick Start Guide
RM-RDSTNR
AM / FM RDS Tuner
To set a memory CH, press “MEMORY”
then press “1~5”, then Memory again.
(10 memory assignable per freq. band)
hoos Mono or Stereo modeTo c e , Press
“MO / ST”.
To set above 5, press , then Memory
“+5”, then “1~5” and press Memory
again. Ex: “+5” and “3” to set it at CH8.
To listen to a saved CH, press
“MEMORY UP” or “M1~M5”. To select
higher, use “+5” and “M1~M5”.
Ex: “+5” and “M3” = CH8.
To search and go to a travel/traffic
station (if available in area), press TA.
4. Q. I connected an MP3/Phone/Media Player but the volume won’t work.
A. The Tuner volume won’t affect the volume coming from your device. You need to control the
the volume on your plugged in device to change volume levels.
3. Q. How can I see what program service I’m listening to because I only see the station?
A. Press “DISP” to switch from Classic, to the Program Service. If a Program Service is not
available, it will show “NO PS”.
Specifications subject to change without notice.
V20160129
601 E. Pawnee Wichita, KS 67211 316. 263.2852 FAX 316.263.0642 www.galaxyaudio.com
Distributed in Canada by Audio Distributors International (ADI) 1275 Newton, unit 6 Boucherville, QC J4B 5H2 Canada
450.449.8177 FAX 450.449.8180
Other Helpful Sources
RM-RDSTNR
Manual
(PDF Download)
RM-RDSTNR
Product Page
RM-RDSTNR
Cutsheet
(PDF Download)
YouTube
How To Video
Quick Start Guide
RM-RDSTNR
AM / FM RDS Tuner
TM
FAQ
1. Q. How can I scan for a station?
A. Press and hold Tuning button for 2 seconds. The tuner will go to the next station.
2. Q. I’m not sure what I’m listening to. How can I see the Program Type?
A. Press “PTY” to see if your station has a program type assigned to their show. If not, the LCD
will display “NO PTY”.
Printed in Taiwan
Other Galaxy Audio Tuner manuals
Popular Tuner manuals by other brands
MFJ
MFJ MFJ-928 instruction manual
NAD
NAD C 445 owner's manual
Sony
Sony ST-SA5ES operating instructions
Sirius Satellite Radio
Sirius Satellite Radio SC-FM1 user guide
Antique Automobile Radio
Antique Automobile Radio 283501B Installation and operating instructions
Monacor
Monacor PA-1200R instruction manual
