Gainwise TH-601W User manual
4
5
7
8
2
TH-601W Quick Guide
V170913-1
Warning: Before you use the device, make
sure device is worked in below
environment, or it can't work properly.
Environment Support
Don't support
Solutions
3G/4G signal ≥75%
3G/4G signal ≤50%,
long delay or can't view video.
1 , User can connect device to 5
smartphones to in case 1-2 smartphones a r
e in poor signal area , other smartphones
can still ring and view.
2, User better to connect smartphone to
WiFi when there is WiFi available.
2.4GHz WiFi.
5GHz WiFi.
Device can't connect.
Change to use 2.4GHz WiFi.
Upload bandwidth≥512KBit/s
<512KBit/s or too many
computers/smartphones in the
same network.
Delay or can't work.
1, Reduce the computers/smartphones
quantity connected in the same network.
2, Change to use a bigger bandwidth
network.
Antenna
Door phone
power supply(DC12V 500mA)
Power in DC+(12V)(Red)
Power in DC-(12V)(Black)
Lock Relay COM(Yellow)
Lock Relay NO(Purple)
Lock
Doorbell
Lock Power
supply
Doorbell Relay COM(Gray)
Doorbell Relay NO(White)
Net RJ45(
Orange&White)
1
Net RJ45(
Orange)
3
6
Doorbell
Power supply
Net RJ45(
Green&White)
Net RJ45(
Green)
Download the App ‘ DIY Smart ’ from ‘Google Play Store’ or ‘App Store’, and install on
mobile phone.
1. Introduction
2. Install theApp
Special Notice: When open the app, you will receive a tip. Please click ‘OK’ to allow
the notifications, otherwise, you cannot receive any notification.
1
Tamper switch
Reset
Thread hole
LENs
Speaker
CDS Sensor
IR LED light
Ring Button
Microphone
2
Android iOS
notice:
Step 1: Insert TF memory card and fix antenna,
connect power supply.
It takes 30 seconds to start device.
Step 2: Connect your mobile phone to your router to register a user ID.
Step 3: Connect your mobile phone to your router.
Special Notice: If 2 mobile phones use the same account ID to login at the same time, only 1 mobile
phone can receive the push notification alarm ring. So, if use 2 mobile phones to connect the device,
user should register 2 different account IDs for the 2 mobile phones.
Power adaptor
Special Notice: Do not connect the
network cable, otherwise, the device
cannot set the Wi-Fi by scanning QR
code.
DIY Smart
For the first time installation,
please tap ‘OK’. Otherwise you
can’t receive any notification.
!
notice:
3. Connect the Device
Register by E-mail:
1. Input your e-mail
2. Input your ID
password
Special Notice: Device don’t support 5Ghz WIFI,user should use 2.4GHz WIFI to connect.
Antenna
3
Wifi name
Input your wifi
password, then
tap ‘Next’.
Set device’s wifi by scanning QR code.
Device will have 'Di.Di.Di.Di....' sound noticing user to scan Wifi QR code.
Turn up the volume of mobile phone and close to device and
click Next Step button.
9. You
will hear
a sound
‘DING’
from the
device.
Special Notice: If device have no 'Di.Di.Di.Di....' sound means the device has
scanned before. User should press the reset button for 5 seconds until hear ‘KING’
and scan after hearing the 'Di.Di.Di.Di....' notice sound.
10. Input
your device
name
1. Input default password
‘123 ‘, then click ' Save'
button to finish setup. (For
device, empty password
lease creates a new
password for the device)
Step 4: Add device. In 'Device List', slide down to find device.
. User should press the
button in the ‘device list’ to enter ‘Add Devices’
interface, press ‘Manual’ button and input device ID and password to adddevice.
1. Slide down to
refresh and find
device.
2
3. Input your
device name
1
2.Click to
add
device
4.Input your
device password,
then tap ‘Save’.
4. Add device to another mobile phones.
4
5
!
notice:
In “Device List-Device Setting -Time setting”, choose your Time Zone, and check if the new
time is right or not. If time is right, press apply to get network time automatically.
Remark:
Time zone example: China UTC+8
Germany/France/Spain/Poland/Italy/Netherlands/Norway/Sweden UTC+1
UK/Portugal/Ireland UTC+0 Turkey/Romania/FinlandUTC+2
Mexico UTC-6
Colombia/Ecuador/Peru UTC-5
Venezuela/Chile/Manaus UTC-4
Argentina/Uruguay UTC-3
In order to receive the push notification from the device, you should turn on ‘Alarm Push’.
Step 1:
notice:
By tapping this icon, you
can delete the ID which no
need alarm push. One
device can push alarm to 5
IDs at most.
5. Date and Time
Check time
is right or not
1. Set Time Zone
. Click to confirm
6. Push Notification Ring
6
Step 2: When people press the call button of the device or trigger the alarm, there
will be a notification received on the mobile phone screen. For Android,
press ‘check’ to view. For iPhone, slide and press ‘view’ or to view.
Android iOS
Date and
Time
Step 1: Start recording. Insert the TF card (DO NOT insert or remove TF card when
device is power on). Enter ‘Device list→ Device Setting →Record setting ’
Click‘Format SD Card’ to format SD card. In ‘Device list→Device→Setting→
Record settings’ choose Record type and Record Time.
Audio
Snapshot
Hang up
Hear/Talk Button
Slide to view
!
notice:
notice: User must keep the app running at phone's background, user can't
force stop the app in phone's application manager, otherwise phone can't
receive any push notification.
7. View Interface
View HD image at
1280*720
View clear imagea
640*360
View smooth image a
320*180
Press and hold for
3 seconds to
unlock. Thenyou
had to wait for 6
seconds to unlock
again.
8. Video Record andPlayback
7
Step 2: Playback. In ‘Device list→Device→Playback', chose the video file to view
playback.
‘Device List→ Setting→ Security Settings’, choose ‘Admin password’ to modify
device’s password.
9. Modify device’s password
1.. Choose ‘Alarm
Recording’ to record
when visitor press
ring button or sensors
triggered.
2 . Choose t h e
recording time.
8
Tap ‘Admin password’
Tap ‘Security Setting’
Input the old password and
the new password,
then tap ‘Save’.
Step 1: Plug in a network cable to the device and the LAN plug of the router.
Step 2: Add device. In ‘device list’ slide down to find device.
10. Reset the device
Press and hold the reset button for 5
seconds and you will hear a voice of
‘KING’, wait 30 seconds to restart the
device.
11. Connect wifi by using network cable
2
3. Input your
device name
1
2.Click
to add
device
1.Slide down torefresh
and finddevice
4. Input your device
password, then tap
‘Save’.
9
Step 3: Set wifi. In ‘Device list→Device→Setting→Network settings’ Choose ‘WIFI’ to set
device WIFI.
Remark:
Please confirm the correct Wi-Fi setting and insure the position with good Wi-
Fi signal before mounting on the wall. Otherwise, it needs to relocate the
router or the antenna direction to receive the good Wi-Fi signal. If the Wi-Fi
signal is still not strong enough, please add the Wi-Fi repeater or use the
network cable. Make a mounting hole similar size as the back housing of the
device. Drill a hole for the wires to go through the wall.
Choose ‘WIFI’
Choose the
WIFI
Input WIFI
password and
tap ‘Ok’
12. Mount on the Wall
Notice: The wifi antenna should be installed inside the house to have better
signal.
Step 1:
Drill a hole for the wires to go through the wall, use the hexagonal screw driver in
the box to remove the rain cover screw at the bottom of the device. Remove the
rain cover sticker and stick the ring cover on the wall.
Step 2:
Fix the back housing on the wall with two screws
Step 3:
Lead the wires through the hole in the wall, and put the device into the back
housing. Tighten the screw in the bottom.
Step 4: Connect the antenna, remove antenna’s sticker and stick antenna on the wall.
Step 5:
Connect the wires of power supply, unlock signal, antenna, etc. in other side
of thewall.
10
Other manuals for TH-601W
1
Table of contents
Other Gainwise Intercom System manuals
