Gainsborough K340 User manual

Set 2 Bloom Illuminating Solar Lights

K340 v001: 31/12/21

Please read and retain these instructions for future reference

ALWAYS POSITION IN DIRECT SUNLIGHT

ASSEMBLY INSTRUCTIONS / INSTRUCTIONS FOR USE:

Unpack the components carefully. Please check all parts have been removed from the packaging.

Before using first time

Remove the protective film from the solar panel.

CHARGING AND OPERATION:

1. Set switch (located on the back of solar case) to “ON” position. Charge the solar product by placing it

under direct sunlight for at least 8 hours.

2. The light will work automatically. It will charge under direct sunlight during the daytime and

illuminate at night.

3. Leave the switch to “ON”position.

NOTE: In order to test the lights simply cover the solar panel with your hand and the light should turn on

automatically.

Find an ideal Place for the Solar Light.

Place the solar light in an area where it will receive direct sunlight for at least 8 hours per day. The number of

hours the light will illuminate is directly proportional to the hours of sunlight it receives. If the light is placed

in a shaded area, it will not be able to fully charge and its illumination time will be limited. Do not place the

light near other outdoor lighting like porch or streetlights. These may fool the sensor and keep the light from

coming on, or cause it to turn off automatically

To easily insert stakes into the ground, it is recommended to wet the ground first. To avoid damaging garden

stakes when inserting into the ground, select a spot in soft, rock-free soil. Insert the base of the stake first

Dimensions

Height 50cm,spacing 50cm

•2 X 2 FLEXIBLE LIGHTS TO DIRECT LIGHT ON THE

PLANTS

•POLYCRYSTALLINE SOLAR PANEL

•LEAD WIRE FROM LIGHTS TO SOLAR PANEL:

100CM

•WARM WHITE LED INSIDE EACH HEAD

•SOLAR POWERED, AUTOMATICALLY TURNING

ON/ OFF AT DUSK AND DAWN

Batteries Required: 1x AA 1.2v 400Mah, Ni-MH,

Rechargeable (Included)

Set 2 Bloom Illuminating Solar Lights K340 Instructions for Use

Please read and retain these instructions for future reference v001: 31/12/21

then gently insert the rest of the stake into the base. DO NOT push directly against the solar cell or the

ornament housing containing the actual LED light.

Replacing Battery

If solar product does not light up after it has been used for around 8 –12 months, replace the rechargeable

battery as it may be weak or worn out. (Battery 1x AA 1.2v 400Mah, Ni-MH, Rechargeable–Same equivalent

type as recommended must be used).

Step 1: Unscrew the battery compartment cover by using a Phillips head screwdriver (not included) .

Step 2: Remove the exhausted battery and install 1x AA rechargeable battery according to the +/- polarity as

beside image. Open the compartment carefully and ensure that wire inside the battery terminals is not

damaged.

Step3: Replace battery compartment cover, screw it back into position and make sure is properly sealed.

Step 4: Charge the solar product by placing it under direct sunlight for at least 8 hours.

Care and Maintenance Recommendations

1. Clean solar panel with a soft sponge every couple of weeks.

2. Make sure all connectors are still tight and no water getting in.

BATTERIES

•Keep batteries away from children and pets.

•Do not mix used and new batteries.

•Remove the batteries if left for long periods.

•Never dispose of batteries in a fire.

•Battery disposal, spent or expired batteries must be properly disposed of and recycled in compliance

with local regulations. For detailed information, contact your local authority.

•Follow the battery manufacturer’s safety, usage, and disposal instructions.

DISPOSAL

•Coopers of Stortford use recyclable or recycled packaging where possible.

•Please dispose of all packaging, paper, cartons, packaging in accordance with your local

recycling regulations.

•Plastics, polybags –this is made from the following recyclable plastic.

Set 2 Bloom Illuminating Solar Lights K340 Instructions for Use

Please read and retain these instructions for future reference v001: 31/12/21

Code &

Symbol

Type of

Plastic

ABS

Commonly

used for

CD’s, crisp packets, various flexible packaging, baby bottles, sunglass lenses

Notes

Not often or widely recycled

•At the end of the product’s lifespan please check with your local council authorised household waste

recycling centre for disposal.

Table of contents

Other Gainsborough Lighting Equipment manuals

Gainsborough

Gainsborough H579 User manual

Gainsborough

Gainsborough K223 User manual

Gainsborough

Gainsborough K895 User manual

Gainsborough

Gainsborough H590 User manual

Gainsborough

Gainsborough L504 User manual

Gainsborough

Gainsborough K338 User manual

Gainsborough

Gainsborough H754 User manual

Gainsborough

Gainsborough K902 User manual

Gainsborough

Gainsborough L015 User manual

Gainsborough

Gainsborough K901 User manual

Gainsborough

Gainsborough H582 WW User manual

Gainsborough

Gainsborough H318 User manual

Gainsborough

Gainsborough K905 User manual

Gainsborough

Gainsborough K419 User manual

Popular Lighting Equipment manuals by other brands

Brizo

Brizo 8SP-MU-4 manual

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 installation instructions

IKEA

IKEA BJÖRKSPIREA manual

Laserworld

Laserworld Evolution Series ES-400RGB manual

Alien

Alien RG STAR user manual

EuroLite

EuroLite LED B-40 user manual

Qazqa

Qazqa Suplux SL 3 Black 103062 instruction manual

Commercial Electric

Commercial Electric 54568141 Use and care guide

CREE LIGHTING

CREE LIGHTING 304 Series installation instructions

Goobay

Goobay 49867 user manual

ECOMAN ITALIA

ECOMAN ITALIA LED T8 instruction manual

Alkalite

Alkalite Krypton KT-81 user manual

Clas Ohlson

Clas Ohlson GU10 manual

DTS

DTS DELTA 10 F user manual

ring

ring Solar Steplight manual

One Stop Gardens

One Stop Gardens 57696 Owner's manual & safety instructions

Chauvet DJ

Chauvet DJ COREpar UV120 ILS user manual

SIREM

SIREM Swimeo A2 instructions