Gabarron RF4P Mounting instructions
ELECTRIC DESIGNER RADIATORS
RF4P RF4E
RF6PRF6E
RF8PRF8E
RF10PRF10E
RF12PRF12E
RF14PRF14E
INSTALLATION INSTRUCTIONS AND USER GUIDE
Please read these instructions before installing or using this appliance for the first time.
INSTALLATION INSTRUCTIONS
1.- WARNING Please read these instructions before installing or using this appliance for the first time.
•The warranty of the heater will not cover any damage caused by non observance of any of these instructions.
•This guide must be kept and given to any new owner.
•Please check that the voltage in the rating label fits the power supply.
•Any reinstallation should be carried out by trained personnel.
•The use of these heaters is forbidden in any area where there is a presence of gases, explosives or inflammable objects.
•DO NOT USE THIS HEATER TO DRY CLOTHES.
•The surfaces of this heater can be hot, so young children should not be left unsupervised in the vicinity of the heater.
•Neither the connecting cable nor any other object must come into contact with the hot unit.
•Do not cover this heater at any time.
•The air outlet at the top of the thermal radiator and the air inlet at the bottom are provided to ensure the most efficient operation of the
appliance. They also protect the heater from overheating; therefore, it is essential that at no time are they covered.
•This heater should be switched off at the isolating switch before any repair work is carried out.
•The thermal radiator should not be installed just below an electrical socket.
•The appliance must be installed in such a way that it is impossible for anyone using a bath or shower, to touch the controls.
•The installation must be carried out in accordance with the current electrical regulations.
•The heater is fitted with a flexible cable size 3 x 1.00 mm2 for electrical connection. It may be used to connect the heater to the fixed wiring of
the premised through a suitable connection box positioned adjacent to the heater.
•The supply circuit to the heater must incorporate a double pole isolating switch having a contact separation of at least 3 mm.
•If the flexible power cable for this unit is damaged, it may only be replaced by a repair workshop recognised by the manufacturer, as special
tools are necessary.
•This appliance must be earthed.
•All models are supplied with an electrical interrupt cut-out. This will switch off the heater if, for any reason, it overheats. Should the cut-out
operate, turn the heater off and remove the cause for the overheating. The cut-out will be reset automatically.
•The presence of air particles of smoke, dust and other pollutants could, in time, discolour the walls and surfaces around the heater.
•This heater is filled with a precise quantity of special oil. Repairs requiring the opening of the oil container are only to be made by the
manufacturer or his service agent who should be contacted if there is an oil leakage.
•Regulations concerning the disposal of oil when scrapping the appliance have to be followed.
Modelo RF4PRF6PRF8P RF10PRF12PRF14P RF4E RF6ERF8E RF10E RF12E RF14E
TYPE Manual - Thermostat only Digital - 24hr / 7 Day Timer & Thermostat
MODULES 46810 12 14 4 6810 12 14
W (cm) 41.5 57.5 73.5 89.5 105.5 121.50 41.5 57.5 73.5 89.5 105.5 121.5
D (cm) 10 (plus 2.5 cm separated from the wall)
H (cm) 58
WEIGHT (kg) 9.5 13.5 17.5 21.5 25.5 29.5 9.5 13.5 17.5 21.5 25.5 29.5
INPUT 500W 750W 1000W 1250W 1500W 2000W 500W 750W 1000W 1250W 1500W 2000W
VOLTAGE 220-240V~
2.- INSTRUCTIONS ON INSTALLATION
- Open the carton at the indicated side. The screws are in the accessories bag. Turn the carton upside down to allow the heater to stand. Check
that it is the correct model and that it is in good condition.
- To obtain optimum performances it is necessary to maintain a minimum clearance of 15 cm between the radiator and any inflammable material
as furniture, curtains etc. See figure .
shel
f
minimum 15cm
minimum 10cm
Closest
object to
the left
end
minimum15cm
Closest
object to the
right end
minimum 25cm
3.- USING THE THERMAL RADIATOR
ELECTRONICS MODELS RFP
Operation in electronic models is controlled by means of two rotary
knobs.
It is possible to regulate the temperature level with accuracy by means
of the temperature selector. The heating indicator will be lit when the
heater is consuming energy. When this dial is set in * position the heater
is in frost protection mode, at this stage if the room temperature drops
below 3ºC the heater will connect itself automatically.
There are three selectable positions with the mode selector dial:
0 : The heater is switched off permanently. No frost protection mode
here.
: SUN mode on, the heater maintains the set temperature with the
temperature selector dial.
: Moon mode on, the heater maintains a temperature 3ºC lower
than the one set with the temperature selector dial.
- The studs and screws are in the accessories bag.
- Hung the unit on the hooks of the brackets.
- By turning the screw the metallic square will go downwards, retaining the heater. Repeat this on the other bracket.
Use the heater as a
template and mark the
fixing points on the wall
using a pencil through the
two fixing holes in the
square brackets.
Position and fix the brackets at the correct distance from the floor
and hang the unit on the hooks of the brackets. and mark the wall.
Use the polystyrene packaging to level the heater and protect the
floor.
Temperature
selector
Mode
selector
SUN mode
indicato
r
MOON mode
indicator
Heating
indicator
DIGITALS MODELS RFE
Digital DISPLAY:
It shows the time,
temperature and other
messages.
Frost protection key:
If the display shows the time
the heater is in frost protection
mode. Press this key to shift
from frost protection mode to
standard mode and vice versa.
Heating indicator:
This small dot will be lit when
the heater is consuming
energy.
SUN indicator
Press this key for more than
two seconds to set the time or
day of the week.
Selector:
0 The heater is switched off
permanently.
P The heater is following a
program.
I The heater is maintaining
the SUN temperature
constantly. Both indicators
will be lit at the same time.
PRG key:
Allows you to create check
or modify programs.
Move forward with + or –
keys and allocate the SUN,
MOON, or 7temperature to
any of the 48 intervals of 30
minutes of the day by means
of the relevant key.
Key + :
It increases the
values.
SUN key :
Press once to see the SUN
temperature value.
Press + or – keys to modify
the value.
MOON key :
Press once to see the
MOON temperature value.
Press + or – keys to modify
the value.
MOON indicator
Key - :
It decreases the
values.
Digital models have built in an electronic thermostat with a sensibility of 0.1 ºC . It is possible to set temperatures with an accuracy of 0.5ºC.
The daily or weekly programmer (selectable) allows you to allocate three different temperature levels to any of the 48 intervals of 30 minutes of the
day.
SWITCHING ON THE HEATER AND SETTING THE TIME
Turn the mode selector dial to Pposition and press the key more than two seconds. The display will show the time intermittently. Set the
minutes by pressing +and -keys and press the . Set the hours the same way. Press once more the key to store the time. If at any time
it is necessary to set the time press the key and repeat the above steps.
FROST PROTECTION MODE 7:
With this mode on, if the room temperature drops below 3ºC the heater will connect itself automatically.
If the display shows the time the heater is in frost protection mode. Press the 7key to shift from frost protection mode (time is shown in the
display) to standard mode (temperature is shown in the display) and vice versa.
SELECTOR “O” , “P”, “I”.
Position “0” : The heater is switched off permanently. The display is switched off.
Position “P” : The heater is following a program. It will maintain the SUN, MOON or 7temperatures as per the introduced program. At this
position if the display shows the time the heater is frost protection mode.
Position “I” : The heater is maintaining the SUN temperature constantly both luminous indicators SUN and MOON will be lit. This could be
useful when SUN temperature is required and we do not want to modify the program. At this position if the display shows the time
the heater is in frost protection mode. Press the 7key to shift from frost protection mode (time is shown in the display) to
standard mode (temperature is shown in the display) and vice versa.
SUN, MOON AND 7TEMPERATURES
The electronic programmer is able to handle three temperature levels during the 24h of the day.
Press the key to set the SUN temperature. The display will show the SUN temperature value blinking.
Set the SUN temperature value by means of the +o – keys and press the key to store the value. If the display shows the time the heater
is in frost protection mode. Press the 7key to shift from frost protection mode (time is shown in the display) to standard mode (temperature is
shown in the display) and vice versa.
Repeat the above steps with the key to set the MOON temperature.
The 7temperature level is 3ºC and it is a fix value. This temperature level can be used as off selection when setting the temperatures during
curtain times of the day.
SUN, MOON, or 7temperatures can be allocated to any of the 48 intervals of 30 minutes of the day.
DAILY PROGRAMMES
It is basic to visualize the day split into 48 intervals of 30 minutes each; SUN, MOON, or 7temperatures can be allocated to any of them.
The default settings include daily mode so that the heater will repeat the program every day. If different programmes are required along a week,
please see the next step WEEKLY PROGRAMMES. To check a programme or to make a new one follow these steps:
Press the PRG key and the display will show 00:00 intermittently. Press one of the three keys 7to allocate SUN, MOON
or OFF (frost protection) from 00:00h to 00:30h. If SUN or MOON temperatures are selected the relevant luminous indicator will be lit. If OFF
temperature 7is selected both luminous indicators will be off.
Press the +key to go to the next interval. The display will show 00:30 intermittently and, again, press one of the three keys 7
to allocate SUN, MOON or OFF (frost protection) from 00:30h to 01:00h or press +key directly if the existing temperature level is ok.
Repeat these steps allocating the desired temperatures levels over the 24 hours of the day. Press the – key at any time to modify a previous
period. By reaching the 23:30 in the display and pressing +key the controller will store the program and will return to the previous mode.
At any time PRG key can be use also to store the program and return the previous mode.
00:00 01:00 02:00 03:00 04:00 05:00 06:00 07:00 08:00 09:00 10:00 11:00 12:00 13:00 14:00 15:00 16:00 17:00 18:00 19:00 20:00 21:00 22:00 23:00 24:00
7
SUN
MOON
OFF
1 - Press PRG 00:00
2 - Press 7Off
3 - Press + key 00:30
4 - Repeat steps 2 and 3 until display shows: 07:30
5 - Press On
6 - Press + key 08:00
7 - Press
8 - Press + key 08:30
9 - Press
10 - Press + key 09:00
11 - Press
12 - Press + key 09:30
13 - Repeat steps 11 and 12 until display shows: 13:00
14 - Press
15 - Press + key 13:30
16 - Repeat steps 14 and 15 until display shows: 15:00
17 - Press
18 - Press + key 15:30
19 - Repeat steps 17 and 18 until display shows: 19:30
20 - Press
21 - Press + key 20:00
22 - Repeat steps 20 and 21 until display shows:: 23:30
23 - Press
EXAMPLE
Let’s see an example of how to introduce a
program with the above distribution of
temperatures.
OFF from 24:00h to 7:30h in the morning.
The heater will be on only if the temperature
drops to 3ºC.
SUN temperature from 7:30h to 9:00h.
MOON temperature from 9:00h to 13:00h.
SUN temperature from 13:00h to 15:00h.
MOON temperature from 15:00h to 19:30h.
SUN temperature from 19:30h to 24:00h.
24 - Press + key GRAB
WEEKLY PROGRAMMES
It is possible to allocate different programs to different days of the week. To do this, the controller has to be upgrade from 24hr mode (factory
default) to 24hr/7days mode as follows:
Move the selector to 0position, the display will be Off. Press the key and at the same time turn the selector to Pposition maintaining the
key at least five seconds. The display will show P-SE which means that weekly mode has been set.
SETTING THE DAY: Press the key more than two seconds and the display will show the number of the day. Set the correct number, if
required, by pressing +or –keys. Press the key and the display will show now the time. Press again the key and new values will be
stored.
To check a programme or to make a new one press PRG key: The display will show dia1 . Press again PRG key and the display will
show 00:00 intermittently. Follow now the steps from DAILY PROGRAMMES section until the display shows again dia1 . Repeat this
process with the 7 days of the week. When the display shows dia7 the weekly program will be stored by pressing +key.
If the display shows dia1 then, pressing + key more than three seconds will copy the day 1 program to day 2 and so on.
It is possible to allocate any of the three temperature levels to all the intervals of any day maintaining the relevant 7key
until an audible signal is heard.
To turn back a controller from 24hr/7days to a single 24hr press PRG key more than six seconds. This will restore the factory default settings.
KEYBOARD LOCK
Press the 7key more than six seconds and the keyboard will be locked. The display will show and the controller will keep on
working internally. To unlock the keyboard press again the 7key more than six seconds .
4.- CLEANING AND MAINTENANCE
Clean and dust with a dry, soft cloth only when the unit is disconnected and cold.
Do not use solvents or abrasive products for cleaning.
This thermal radiator has been manufactured under an assured quality system using environment friendly processes.
Please take the heaters to a clean point once their useful life is finished, in order to recycle their materials in the right way.
5.- TROUBLESHOOTING
- The thermal radiator does not heat. Check the heater or the air inlets are not covered.
Digital models: the display shows the time press the 7key to switch on the heater. Check that the
DAY or NIGHT temperatures are right.
- The room does not reach the right
temperature. Check the selected temperature is in accordance with the desired temperature. Maybe the room needs
more heating power.
- DAY and NIGHT luminous indicators
are lit at the same time. Digital models: Continuous mode has been selected. Turn the knob to the “P” position to return to the
Program mode if required.
- The display shows “Err1” or “Err2” Digital models: Contact the after sale service.
- Only daily programmes. The controller is in a single 24hr mode (factory default). See WEEKLY PROGRAMMES section to swift
to 24hr/7days mode.
- The keyboard is locked. If the display shows the keyboard is locked. To unlock the keyboard press the 7key
more than six seconds.
WIRING
sensor
controller
sensor
controller
MODELS RF-E
R heating element
Ts safety cut - out
C three way selector
MODELS RF-P
R heating element
Ts safety cut out
C three way selector
This manual suits for next models
11
Table of contents
Other Gabarron Heater manuals
Gabarron
Gabarron Elnur ECOMBI HHR Series User manual
Gabarron
Gabarron ECOHHR20 Setup guide
Gabarron
Gabarron DILIGENS DIL4GC Mounting instructions
Gabarron
Gabarron RF Series Mounting instructions
Gabarron
Gabarron ADL 5030 Mounting instructions
Gabarron
Gabarron ADL 5030 Mounting instructions
Gabarron
Gabarron Elnur A-4 Mounting instructions
Gabarron
Gabarron ECOMBI ECO158 Guide
Gabarron
Gabarron DILIGENS DIL4GC Mounting instructions
Gabarron
Gabarron RKS4Hi User manual
Gabarron
Gabarron Elnur RBC9 Wiring diagram
Gabarron
Gabarron Ecombi HHR Series User manual
Gabarron
Gabarron PHM075 Mounting instructions
Gabarron
Gabarron CP Series Mounting instructions
Gabarron
Gabarron Ingenium RX6ELST Mounting instructions
Gabarron
Gabarron Elnur INGENIUM Series Wiring diagram
Gabarron
Gabarron Ecombi HHR Series User manual
Gabarron
Gabarron PH-125 Plus Mounting instructions
Gabarron
Gabarron RFS4P User manual
Gabarron
Gabarron IDM-2000 Mounting instructions
Popular Heater manuals by other brands
oventrop
oventrop Regucor Series quick start guide
Blaze King
Blaze King CLARITY CL2118.IPI.1 Operation & installation manual
ELMEKO
ELMEKO ML 150 Installation and operating manual
BN Thermic
BN Thermic 830T instructions
KING
KING K Series Installation, operation & maintenance instructions
Empire Comfort Systems
Empire Comfort Systems RH-50-5 Installation instructions and owner's manual
Empire Heating Systems
Empire Heating Systems WCC65 Installation and owner's instructions
Wetekom
Wetekom 92 86 43 Original instructions
Desa
Desa SPC170-F owner's manual
Watlow
Watlow Watrod Electric Tubular Heaters Specifications
Haverland
Haverland ECO-DRY GPS Series Instruction & installation manual
Stelpro
Stelpro ASILVC2060 Series user guide