2
IMPORTANT SAFETY
INSTRUCTIONS
Before using your telephone equipment, basic safety precautions should
always be followed to reduce the risk of fire, electric shock and injury to
persons including the following:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Do not use liquid
or aerosol cleaners. Use a damp cloth for cleaning.
4. Do not use this product near water, for example, near a bath tub, wash
bowl, kitchen sink, or laundry tub, in a wet basement or near a swimming
pool.
5. Do not place this product on an unstable cart, stand, or table. The product
may fall causing serious damage to the product.
6. Slots and openings in the enclosure and the back and bottom are provided
for ventilation, to prevent overheating. These openings must not be blocked
or covered. The openings should never be blocked by placing the product
on a bed, sofa, rug, or other similar surface. This product should never be
placed near or over a radiator or heat register. This product should not be
placed in a built-in installation unless proper ventilation is provided.
7. This product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power
supply to your home, consult your dealer or local power company.
8. Do not allow anything to rest on the power cord. Do not locate this product
where the cord will be abused by persons walking on it.
9. Do not overload wall outlets and extension cords as this can result in the
risk of fire or electric shock.
10.Never push objects of any kind into this product through enclosure slots as
they may touch voltage points or short out parts that could result in a risk of
fire or electric shock. Never spill liquid of any kind on the product.
11.Do not disassemble this product. Take it to a qualified service technician or
center when repair work is required. Opening or removing covers may
expose you to voltage or other risks. Incorrect reassembly can cause
electric shock when the appliance is subsequently used.
12.Unplug this product from the wall outlet and refer to qualified service
personnel under the following conditions:
A. When the power supply cord or plug is damaged or frayed.
B. If liquid has been spilled into the product.
C. If the product has been exposed to rain or water.
D. If the product does not operate normally by following the operating
