Furuno SCX-21 Installation guide

FAQ

SCX20 FAQ

Q How can the SCX21 be mounted?

The SCX21 comes standard with a pole mount kit. This kit supports a 1” NPT.

Optional mast mount kit is also available. Part # 001-556-240-00. This kit is used

in combination with the pole mount kit.

The SCX21 can also be surface mounted. Please see the installation manual for

full details.

Q What are the physical dimensions of the SCX21?

3”H x 8”W x 10”L (without pole mount attachment). 2.2lbs

Q What type of connector does the SCX21 use?

The SCX21 uses a 16pin proprietary connector.

Q What connection cable is the SCX21 supplied with?

The SCX21 is supplied with a 15-meter serial data/power pigtail cable. A 30-meter cable is

optional. Part # 001-555-570.

Q How many I/O ports does the SCX20 have?

The SCX21 has one Three (3) NMEA0183 ports. Two (2) NMEA0183 input ports, and one PPS

port for WASSP.

Q What voltage can the SCX21 operate from?

The operating voltage of the SCX21 is 12vdc to 24vdc.

Q What NMEA0183 sentences does the SCX21 output/Input?

Q Sample connection diagram.

Q When the GP39 is connected to the SCX21, what additional displays are

available on the GP39?

Q Does the SCX21 output Heave information for my Furuno Sounder?

Yes, the SCX21 outputs Heave along with pitch and roll.

Q What is the update rate of the SCX20 position/heading information?

The SCX21 updates position and heading at 10hz.

Q Can the output rate be changed and or individual sentences turned off?

Yes. Sentence output rates can be individually changed or turned off completely using a

connected GP39, or via a PC running Tool software.

Q Is the SCX21 compatible with the TZtouch2/3 sensor management

menu?

No. TZT2/3 Sensor management is done over the NMEA2000 bus. The SCX21 is not a

NMEA2000 device.

Q Is the SCX21 affected by GPS blockage and or multipath?

Any GPS sensor or satellite heading sensor can be affected by blockage and or multipath. The

SCX21 decreases these affects by using 4 internal GNSS antennas creating 6 baselines, the

most currently available on the market, for measurement. While the SCX21 can use all 6

baselines for heading, it does not have to. It can calculate heading using only two baselines.

The chance that all 6 baselines would be affected by multipath is decreased. This makes the

SCX21 much more resistant to these issues.

Q What satellite systems is the SCX21 compatible with?

The SCX20 is compatible with GPS, Galileo (EU), GLONASS (Russia), and QZSS (Japan and

Oceania). The SCX20 will track multiple GNSS Satellite Systems for heading calculation.

Q Is the SCX21 compatible with any SBAS systems?

The SCX21 is compatible with the following Satellite Based Augmentation Systems.

Q How can offsets and changes be made to the SCX21?

Offsets and changes can be made to the SCX21 via a GP39, or by a PC running SCX20 Tool

software. Slight heading corrections can also be made by physically adjusting (port or

starboard) the SCX21 antenna. The PC Tool software can also monitor the status of the

SCX21, such as condition, signal reception and blockage condition of all the antennas.

Q How is the SCX21 connected when used with the PC Tool software?

A PC is connected to either Port 1 or 3 using a USB 422/485 converter.

Q Is the SCX21 compatible with the IF-NMEASC?

No. The SCX21 is not compatible with the IF-NMEASC. However, you could use the SCX21 to replace

an SC30/IF-NMEASC installation.

Q What options are available for the SCX21?

Options include mast mount kit, Bird repellents, Snow cover kit, GP39. For a complete list of

available options, please visit the accessories page of the SCX21 on the Furuno USA website.

Rev. February 19, 2020

This manual suits for next models

1

Table of contents

Other Furuno Marine Equipment manuals

Furuno

Furuno FELCOM 70 User manual

Furuno

Furuno FI-301 User manual

Furuno

Furuno FICE-100 User manual

Furuno

Furuno FE-880T User manual

Furuno

Furuno FA-170 Manual

Furuno

Furuno TZT-3KP-F3D User manual

Furuno

Furuno FCV-1500 User manual

Furuno

Furuno FE-808 User manual

Furuno

Furuno NavPilot 711 User manual

Furuno

Furuno 520 User manual

Furuno

Furuno BBDS1 User manual

Furuno

Furuno DSC-6 Manual

Furuno

Furuno FCV-271 User manual

Furuno

Furuno AUTOPILOT FAP-300 User manual

Furuno

Furuno MU-270W User instructions

Furuno

Furuno FG-11/200 MARK-3 User manual

Furuno

Furuno FE-680 User manual

Furuno

Furuno GP-3700F User manual

Furuno

Furuno MF/HF DSC/Watch Receiver DSC-60 User manual

Furuno

Furuno FR-10 User manual

Furuno

Furuno LS-4100 User manual

Furuno

Furuno MF/HF DSC/Watch Receiver DSC-60 User manual

Furuno

Furuno FI70BW Instruction Manual

Furuno

Furuno Navigational Echo Sounder FE851S User manual

Popular Marine Equipment manuals by other brands

Clarion

Clarion CMS2 Owner's manual & installation manual

EBS

EBS M7000 installation manual

Kongsberg

Kongsberg M3 Bathy installation manual

NPK

NPK SCS-1002 operating manual

Harken

Harken 1561 instructions

Simrad

Simrad DD15 manual

Notifier

Notifier FS-BSO Installation and maintenance instructions

Raymarine

Raymarine ST40 Quick reference guide

E2S

E2S E2XS112UL Instructions/service manual

R2Sonic

R2Sonic 2026 Operation manual

COBHAM

COBHAM SAILOR 6000 installation manual

Clarion

Clarion GR10BT Owner's manual & installation manual

Raymarine

Raymarine Maxiview ST80 Owner's handbook

GUIDANCE MARINE

GUIDANCE MARINE 20- Series Installer's guide

Raymarine

Raymarine ST60 Tridata Owner's handbook

olympia electronics

olympia electronics ΒS-531/1/MAR quick start guide

Sonic

Sonic 2024 Operation manual

Quicksilver

Quicksilver 88688A25 Installation, operation and maintenance instructions