Furuno FCV30BB User manual
www.furuno.co.jp
All brand and product names are trademarks, registered trademarks or service marks of their respective holders.
Installation Manual
COLOR SOUNDER FCV-30
SAFETY INSTRUCTIONS.....................................................................................................................i
SYSTEM CONFIGURATION ...............................................................................................................iii
EQUIPMENT LISTS.............................................................................................................................iv
1. MOUNTING ......................................................................................................................................1
1.1 Control Unit...............................................................................................................................1
1.2 Processor Unit...........................................................................................................................3
1.3 Transceiver Unit........................................................................................................................4
1.4 Transducer................................................................................................................................5
1.5 Junction Box ............................................................................................................................8
2. WIRING.............................................................................................................................................9
2.1 Interconnection..........................................................................................................................9
2.2 Cable Fabrication....................................................................................................................11
2.3 Synchronizing Transmission with Echo Sounder or Other Sonar...........................................13
2.4 Input/Output Sentences ..........................................................................................................14
3. SYSTEM SETTINGS AFTER INSTALLATION ...............................................................................15
OUTLINE DRAWINGS......................................................................................................................D-1
INTERCONNECTION DIAGRAM.....................................................................................................S-1
Thepaperusedinthismanual
iselementalchlorinefree.
・FURUNOAuthorizedDistributor/Dealer
9‑52Ashihara‑cho,
Nishinomiya,662‑8580,JAPAN
Telephone: +81‑(0)798‑65‑2111
Fax:
+81‑(0)798‑65‑4200
A
:
FEB
2005
.
PrintedinJapan
Allrightsreserved.
F
:
APR
.
20,2010
Pub.No.
IME‑23730‑F
*00015183715**00015183715*
(
TOMA
)
FCV‑30
*
00015183715
*
*
00015183715
*
*00015183715*
i
SAFETY INSTRUCTIONS
WARNING
Turn off the power at the switchboard
before beginning the installation.
Fire or electrical shock can result if the
power is left on.
Do not install the equipment where it
may get wet from rain or water splash.
Water in the equipment can result in fire,
electrical shock or equipment damage.
Be sure no water leaks in at the trans-
ducer mounting location.
Water leakage can sink the vessel. Also,
confirm that the transducer will not loosen
by ship's vibration. The installer of the
equipment is solely responsible for the
proper installation of the equipment.
FURUNO will assume no responsibility for
any damage associated with improper
installation.
Be sure that the power supply is
compatible with the voltage rating of
the equipment.
Connection of an incorrect power supply
can cause fire or equipment damage. The
voltage rating of the equipment appears
on the label above the power connector.
ELECTRICAL SHOCK HAZARD
Do not open the equipment
unless totally familiar with
electrical circuits and
service manual.
Only qualified personnel
should work inside the
equipment.
WARNING
Install the transducer according
to the installation instructions.
Failure to install the transducer correctly
may result in water leakage and damage to
the ship's hull.
For wooden or FRP vessel using a steel
tank, attach a zinc plate to the hull to
prevent electrolytic corrosion.
Electrolytic corrosion can, in the worst
case, result in loss of the transducer.
SAFETY INSTRUCTIONS
ii
CAUTION
Observe the following compass safe
distances to prevent interference to a
magnetic compass:
Ground the equipment to
prevent mutual interference.
Do not allow warm water or any other
liquid other than seawater or freshwater
to contact the transducer.
Damage to the transducer may result.
Do not install the transducer where
noise or air bubbles is present.
Performance will be affected.
CAUTION
The transducer cable must he handled
carefully, following the guidelines
below.
•Keep fuels and oils away from the
cable.
•Locate the cable where it will not be
damaged.
•The cable sheath is made of chloro-
phrene or polychloride vinyl, which
are easily by damaged plastic solvents
such as toulene. Locate the cable
well away from plastic solvents.
Standard
compass
Steering
compass
CV-301
CV-302
CV-300
0.85 m 0.55 m
1.55 m 0.95 m
1.25 m 0.70 m
CV-304
1.10 m 0.70 m
iii
SYSTEM CONFIGURATION
POWER
F1
F4
F3
F2
Processor Unit
CV-300
Control Unit
CV-301
100-240 VAC
1
φ
, 50/60 Hz
100-120/200-240 VAC
1
φ
, 50/60 Hz
Transceiver Unit
CV-302
Junction Box
(option)
CV-304
Transducer
CV-303
Display Unit (option)
MU-151C/MU-201C
or commercially available monitor
Navigator
Satellite Compass
Net Sonde
Hard Disk
USB Memory
Network Sounder
ETR-30N
iv
EQUIPMENT LISTS
Standard supply
Name Type Code No. Qty Remarks
Processor
Unit CV-300 −1 With spare parts SP02-04801, SP02-05101
and installation materials CP06-01401
Control Unit CV-301 −1 With FP03-09860 & CP03-25604
CV-302Transceiver
Unit CV-302-MS −1 With SP02-04901 & CP02-07801
Transducer CV-303 −1
Thru-hull pipe TFB-1600 000-012-539 1
CP03-28900 000-082-658 Connector CP03-28901 (MPS588-C:
000-166-044-10, 2 pcs) & cable
FR-FTPC-CY *10m*
CP03-28910 000-082-659 Connector CP03-28901 (MPS588-C:
000-148-322, 2 pcs) & cable FR-FTPC-CY
*20m*
Installation
Materials
CP03-28920 000-082-660
1 set
Connector CP03-28901 (MPS588-C:
000-148-322, 2 pcs) & cable FR-FTPC-CY
*30m*
Installation Materials CP06-01401: 001-403-810
Name Type Code no. Qty Remarks
Connector SRCN6A13-3S 000-160-725-10 1 For power line
Installation Materials CP03-25604: 008-539-850
Name Type Code no. Qty Remarks
Screw M4x12 000-163-192-10 4
Installation Materials CP02-07801: 001-416-080
Name Type Code no. Qty Remarks
Crimp-on lug FV5.5-S4 000-166-750-10 3
Spare parts SP02-05101: 001-416-060
Name Type Code no. Qty Remarks
Fuse FGMB 250V 5A
PBF 000-157-570-10 2
EQUIPMENT LISTS
v
Spare parts SP02-04901: 001-416-070
Name Type Code no. Qty Remarks
Fuse FGMB 125V 10A PBF 000-157-470-10 2
Fuse FGMB 250V 5A PBF 000-157-570-10 2
Accessories SP03-09860: 008-535-690
Name Type Code no. Qty Remarks
Cushion TM-180-302 000-166-468-10 2
Grommet G-49 000-166-406-10 1
Blind seal 22-020-1005-1 100-173-591-10 3
KB fixing metal 03-163-7821-1 100-306-291-10 1
Pan head screw M4x12 000-163-192-10 2
Optional equipment
Name Type Code No. Qty Remarks
CV-304-10 000-012-540 1
With cable Z-FNH-SB
68XP26AWG, 10 m
Junction box
CV-304-20 000-012-541
With cable Z-FNH-SB
68XP26AWG, 20 m
Transducer tank T-625 000-012-545 1
Transducer Fixing
plate kit T-625-A 001-096-720 1
1
1. MOUNTING
NOTICE
Do not apply paint, anti-corrosive sealant
or contact spray to coating or plastic
parts of the equipment.
Those items contain organic solvents that
can damage coating and plastic parts,
especially plastic connectors.
1.1 Control Unit
Mounting considerations
When selecting a mounting location, keep in mind the following points:
• Select a location where the control unit can be operated conveniently.
• Locate the unit away from heat sources because of heat that can build up inside the unit.
• Locate the equipment away from places subject to water splash and rain.
• Determine the mounting location considering the length of the signal cable between the
control unit and the processor unit. (The length of the signal cable is 5 m.)
• Observe the compass safe distances on page ii to prevent deviation of a magnetic
compass.
Fixing with KB fixing plate
1. Fix the KB fixing plate to the bottom of the control unit.
2. Attach cushions to the bottom of the control unit as shown below.
3. Fix it to a desired location with self-tapping screws (local supply).
Cushion
KB fixing plate
1. MOUNTING
2
Fixing without KB fixing metal
1. Drill four mounting holes of 5 mm diameter referring to the drawing below.
2. Fix the control unit with four screws (M4) from under side of the desktop. Use M4x12
(supplied) for mounting panel thickness “t” between 2 and 5 mm. For greater thickness,
screw length shall be M4x(t+7.8±2).
F4
F3
F2
F1
180
110±1
160
136±1
4-M4 (Fixing holes)
(bottom)
1. MOUNTING
3
1.2 Processor Unit
The processor unit can be mounted on the deck, a desktop or on a bulkhead. Select a
mounting location considering the points below.
• Locate the unit out of direct sunlight.
• Select a location where temperature and humidity are moderate and stable.
• Locate the unit where its cover can be easily removed and cabling easily accessed.
• For mounting on a bulkhead be sure the mounting location is strong enough to support
the unit under the pitching and rolling normally encountered on the vessel.
• Leave sufficient space around the unit for maintenance and servicing. Recommended
maintenance space “#” appears in the figure below.
Tabletop or deck mounting: Fasten with four tapping screws.
Bulkhead mounting: Screw in two tapping screws in mounting location for lower mounting
holes of the unit, leaving 5 mm protruding. Set the processor unit to the screws, tighten
screws and screw in two tapping screws for upper mounting holes of the unit.
5A5A
POWER
KEY-
BOARD
MOUSE
NMEA1CONT NMEA2 CIF
USB
LAN1
INPUT 100-240 VAC
3A 50/60 Hz
GND
LAN2
2
1
3
COM1 RGB OUT
#150 #50
17
368
335 17
2-
φ
6320
200±0.5
8
352±2
R3
6
200±0.5
#50
128
#50
125
Fixing holes
Ground terminal
This manual suits for next models
1
Table of contents
Other Furuno Marine Equipment manuals
Furuno
Furuno LS-4100 User manual
Furuno
Furuno FI-70 User manual
Furuno
Furuno FI-501 User manual
Furuno
Furuno FMD3100 User manual
Furuno
Furuno FCV-620 Manual
Furuno
Furuno NX-300 User manual
Furuno
Furuno Multi Instrument FI-504 User manual
Furuno
Furuno FCV-1100L User manual
Furuno
Furuno FSV-25 MARK-2 User manual
Furuno
Furuno IF-1002 User manual
Popular Marine Equipment manuals by other brands
Raymarine
Raymarine Maxiview ST80 Owner's handbook
GUIDANCE MARINE
GUIDANCE MARINE 20- Series Installer's guide
Raymarine
Raymarine ST60 Tridata Owner's handbook
olympia electronics
olympia electronics ΒS-531/1/MAR quick start guide
Sonic
Sonic 2024 Operation manual
Quicksilver
Quicksilver 88688A25 Installation, operation and maintenance instructions