Furuno GP-7000F Manual

COLOR GPS/PLOTTER/SOUNDER

GP-7000F

Operator’s Guide

The purpose of this Operator's Guide is to provide basic operating procedures for this

equipment. For more detailed information see the Operator's Manual.

(Hard keys)

Key name Function

MENU key Shows/hides the menu bar.

DISP key Shows/hides DISPLAY MODE menu.

MOB/WPT key Short press: Enters a waypoint. Long press: Enters the MOB mark.

TLL/GOTO key Sets the waypoint or route as destination.

ROUTE key Creates the route.

CLEAR key Silences the audible alarm; erases the various windows one by one.

POWER/BRILL key Long press: Turns power off.

Short press: Turns power on. Shows the BACKLIGHT window.

Cursor pad

Moves the cursor.

(Sounder) Moves the time cursor.

RANGE key

Changes the range.

-: Shrinks the scale, and expands image.

+: Expands the scale, and shrinks image.

Hard keys

See below.

ENTER knob

Rotation: Selects menu items.

(Sounder) Moves VRM.

Push: Confirms entry.

Soft keys

Changes function according

to screen in use. Card slots

Drive for chart/memory cards.

Plotter

Returning Own Ship to Screen

Center

Press the CENTER soft key.

Adjusting Brilliance

1. Press the BRILL key to show the

BACKLIGHT window.

2. Rotate the ENTER knob to adjust the

brilliance.

3. Push the ENTER knob to close the

window.

Entering Waypoints

1. Operate the cursor pad to place the

cursor at the position desired.

2. Press the MOB/WPT key. Finally, press

the ENTER knob.

Entering Routes

1. Operate the cursor pad to place the

cursor at the position desired.

2. Press the ROUTE key, and then press

the SAVE soft key.

3. Repeat steps 1 and 2 to complete the

route.

Setting Destination

Operate the cursor pad to place the cursor

on the waypoint you want to go, and then

press the GOTO key.

Setting Arrival Alarm

1. Press the MENU key.

2. Choose ALARMS from the menu bar,

and then push the ENTER knob.

3. Choose ARRIVALALARM and then

push the ENTER knob.

4. Rotate the ENTER knob to choose the

value and push it.

5. Enter the alarm range and then press

the ENTER knob.

Plotter display

Cursor

Own ship

mark Nav data

Sounder

Sounder display (dual mode)

Showing the Sounder Display

1. Press the DISP key.

2. Rotate the ENTER knob to choose the

sounder icon ( ).

3. Push the ENTER knob.

Selecting the Sounder Display

Mode

1. Press the DISP soft key.

NORMAL

BOTTOM LOCK

BOTTOM ZOOM

MARKER ZOOM

BOTTOM DISCRIMINATION

2. Rotate the ENTER knob to choose the

mode desired.

3. Push the ENTER knob.

Automatic Sounder Operation

The automatic sounder function

automatically selects the proper gain, range

scale and clutter suppression.

1. With a sounder display showing, press

the AUTO soft key.

2. Rotate the ENTER knob to choose FISH

or CRUISE, and then push it.

Manual Sounder Operation

1. With a sounder display showing, press

the AUTO soft key.

2. Rotate the ENTER knob to choose

MANUAL, and then push the ENTER

knob.

Adjusting the gain

Choose GAIN 50 or GAIN 200 from the

SENSITIVITY menu, and then enter

appropriate gain.

Shifting the basic range

Press the SHIFT soft key, and then rotate the

ENTER knob.

Depth scale

Depth

Fish school

Bottom

Suppressing Interference

1. Press the MENU key to show the menu

bar.

2. Choose NOISE LIMITER from the

SENSITIVITY menu, and then push the

ENTER knob.

OFF

LOW

MEDIUM

HIGH

3. Rotate the ENTER knob to choose LOW,

MEDIUM or HIGH as appropriate.

4. Push the ENTER knob.

Suppressing Low Level Noise

1. Press the MENU key to show the menu

bar.

2. Choose CLUTTER from the

SENSITIVITY menu.

GAIN 50 000

GAIN 200 000

NOISE LIMITER HIGH

CLUTTER 0

WHITE LINE OFF

SIGNAL LEVEL OFF

3. Push the ENTER knob to show the

clutter level window.

4. Rotate the ENTER knob to choose

clutter rejection level.

5. Push the ENTER knob.

Selecting Picture Advance

Speed

1. Choose PICTURE ADVANCE from the

SOUNDER menu.

2. Push the ENTER knob to show the

picture advance window.

STOP

1/16

1/8

1/4

1/2

1/1

2/1

3. Rotate the ENTER knob to choose

speed.

4. Push the ENTER knob.

Activating Sounder Alarm

1. Press the MENU key to show the menu

bar.

2. Choose ALARMS, and then push the

ENTER knob.

3. Rotate the ENTER knob to choose FISH

ALARM or FISH ALARM (B/L) as

appropriate.

4. Push the ENTER knob twice.

Off

Depth 0000.0 Ft

Range 0010.0 Ft

Level Medium

Off

Depth 0000.0 Ft

Range 0010.0 Ft

Fish alarm Fish alarm (B/L)

Off

On Off

3. Rotate the ENTER knob to choose On,

and then enter the depth and range. For

FISH ALARM, Level should also be

entered.

4. Press the SAVE soft key.

PUB.NO.OSE-4429

-A1

(0409,HIMA) GP-7000F

Other manuals for GP-7000F

Table of contents

Popular GPS manuals by other brands

Raven

Raven Cruizer II Manual

Hama

Hama 53118 Operating instruction

Garmin

Garmin SOUNDER 125 Owner's manual & reference

Garmin

Garmin DEZL 580 owner's manual

Jigabot

Jigabot EX quick start guide

Pointer

Pointer Cellocator CelloTrack XT LTE overview

Queclink

Queclink GV55LITE user manual

Voxson

Voxson Voxtrack GPS500 Quick user guide

Garmin

Garmin ECHOMAP PLUS owner's manual

Starcom Systems

Starcom Systems Kylos Compact user guide

Garmin

Garmin 15 H Series Technical specifications

Cobra

Cobra Marine MC 600Ci owner's manual

Cellocator

Cellocator CelloTrack T installation guide

Enfora

Enfora Mini-MT GSM2228UG001 user guide

Magellan

Magellan eXplorist 100 Reference manual

LTE

LTE G50B user manual

Garmin

Garmin DEZL OTR500 owner's manual

SkyGolf

SkyGolf SkyCaddie SG1 user guide