Fujitsu TeamPad500 System User manual
TeamPad500
System
User's Guide
Revision 1.00.00
March 27, 2001
P/N 90000455
TeamPad 500 User’s Guide
Copyright 2001 by Fujitsu-ICL Systems Inc.
2 of 47
Revision History
Revision Number Date Description of Change
1.00.00 2-1-2001 Original Release
TeamPad 500 User’s Guide
Copyright 2001 by Fujitsu-ICL Systems Inc.
3 of 47
Read this manual before using this product.
User's Guide
Thank you for purchasing the TeamPad 500 (referred to as the "equipment" in this document).
To ensure proper operation and satisfactory performance of this product, be sure to read this manual
thoroughly before using this equipment.
Intention of the User’s Guide
To document the functionality of the display screens that are unique to the equipment. This
document is not intended to document Windows CE 2.12.It is assumed that the user has knowledge
of the features and functionality of Windows CE.
Windows, Windows CE, Visual C++, and Visual Basic are registered
tra
de
mark
s
o
f Mi
c
r
oso
ft
Co
r
po
rati
o
n in th
e
U.S.
an
d
o
th
e
r
cou
ntri
es.
TeamPad 500 User’s Guide
Copyright 2001 by Fujitsu-ICL Systems Inc.
4 of 47
Table of Contents
1 Quick Start Checklist ......................................................7
1.1 Open the Package ........................................................7
1.2 Turn the Power On .......................................................7
1.3 Equipment Startup .......................................................7
1.4 Application Setup and Configuration .....................................7
1.5 Run Installed Applications ..............................................7
2 Equipment Startup ..........................................................8
2.1 Startup check ...........................................................8
2.2 Touch Panel Calibration .................................................9
2.3 Date and Time Settings .................................................10
3 Application Setup and Configuration .......................................11
3.1 Setup Menu .............................................................11
3.2 Control Panel ..........................................................12
3.2.1 System Properties...................................................13
3.2.2 Power Management Properties.........................................14
3.2.3 Display Properties..................................................15
3.2.4 Date and Time Properties............................................16
3.2.5 Screen Input Panel (SIP) Keyboard Size..............................17
3.3 Application Installation ...............................................19
3.4 TeamPad Configuration ..................................................21
3.4.1 Initialize Settings.................................................21
3.4.2 Launcher Keys.......................................................23
3.4.3 Registry Backup and Restore.........................................25
3.4.4 Combination Keys....................................................27
3.5 Application Backup and Restore
............................................28
3.6 Registry Editor ........................................................30
3.7 TeamPad Explorer .......................................................32
3.8 Run a Program ..........................................................35
3.9 Debug Mode .............................................................36
4 Basic Operations ..........................................................37
4.1 Turning on the backlight ...............................................37
4.2 Battery Status .........................................................37
4.3 Adjusting the Sound Volume .............................................39
4.4 Touch Panel Calibration ................................................40
4.5 Alpha Keyboard Pop-up ..................................................41
4.6 Low Main Battery Warning ...............................................42
4.7 Low Sub Battery Warning ................................................43
5 Restoring the Application .................................................44
5.1 Touch Panel Calibration ................................................45
5.2 Date and Time Settings .................................................46
5.3 Restore/Re-Initialize the Application ..................................47
TeamPad 500 User’s Guide
Copyright 2001 by Fujitsu-ICL Systems Inc.
5 of 47
Warnings
This manual uses various indications to urge the user to use the equipment safely, to prevent
personal injury or property damage. Be sure to understand these indications and their meanings
before continuing to read this manual.
Symbol Description
This alert signal also indicates that damage to the product or other
property may occur if the user does not perform the procedure correctly.
Other symbols
Symbol Description
This indicates precautions on use or what must not be done. Read the
statement carefully.
Indicates advice or reference information. Read the statement when
necessary.
Screen and entry examples
The screen display examples are given purely as examples and apply to individual situations. Keep
in mind that the actual screens may differ.
The data in the entry examples is given purely as example and applies to individual situations.
Keep in mind that the actual data required for entry may differ.
Key notations
Key Meaning
PWR key Use this key to turn the power to the equipment on or off (this key is
called the power key in this document).
Numerical keys
(0 to 9) Use these keys to enter numbers
ENT key Enter key. Use this key to confirm and execute operations.
Cursor keys Use these keys to move the cursor in the desired direction.
CLR key Use this key to cancel operations and clear data entries.
BKS key Backspace key.
SFT key Shift key. Use this key to perform shifted operations.
F1-F5 keys Function keys. Use these keys to perform special operations.
Key Backlight key.
Key (+/-) This key is used to adjust the contrast (“+” for more contrast and “-
“ for less contrast).
CAUTION
Important
Remember
TeamPad 500 User’s Guide
Copyright 2001 by Fujitsu-ICL Systems Inc.
6 of 47
Touch panel operation
The equipment has a touch panel display. Tapping on the screen has the same effect as left tapping
with the mouse.
Method of screen tapping is explained below.
Notation Meaning
Tap Similar to left tapping a mouse. Denotes” touching” a point on the
screen. This is done to execute an operation.
Double tap Corresponds to double tapping a mouse. Denotes “double touching” a
point on the screen. This is done to run a program.
When tapping the screen, use your finger or a dedicated accessory stylus (a pen for tapping). Do
not use a tool with a sharp edge in place of the dedicated stylus, as this may damage the panel.
CAUTION
TeamPad 500 User’s Guide
Copyright 2001 by Fujitsu-ICL Systems Inc.
7 of 47
When using the equipment for the first time, follow the procedure given below.
1.1 Open the Package
Remove the equipment from the package. For details, refer to the “Quick Reference Guide” that
comes with the equipment.
1.2 Turn the Power On
Connect the equipment to an AC adapter or charging unit to provide power to the main and sub
batteries.
Press the power switch to turn on the power. For details, refer to the “Quick Reference Guide” that
comes with the equipment.
1.3 Equipment Startup
After turning the power on, follow the steps in “Equipment Startup” (see section 2) to initialize the
equipment.
1.4 Application Setup and Configuration
Configure the equipment through the “Setup Menu”. For details, refer to Section 3. Follow the
installation instructions provided by the application provider.
1.5 Run Installed Applications
Start the equipment to verify that the unit is properly configured.
The main battery is not charged. Be sure to charge it or connect the AC adapter to the equipment
before starting with operations.
When turning on the power for the first time, or after a hard reset (ie both batteries removed) a
check is made on the equipment. If the unit has never been installed and configured through the
“Setup Menu” the following equipment check screen is displayed.
1Quick Start Checklist
Remember
TeamPad 500 User’s Guide
Copyright 2001 by Fujitsu-ICL Systems Inc.
8 of 47
2Equipment Startup
2.1 Startup check
To begin the startup procedure: Hold down the ENT/SYS key, then press the “1” Key to Start the
Touch panel calibration.
To stop the startup procedure: Turn off the power by pressing the power key.
TeamPad 500 User’s Guide
Copyright 2001 by Fujitsu-ICL Systems Inc.
9 of 47
2.2
2.22.2
2.2 Touch Panel Calibration
The following calibration screen will appear. Follow the instructions on the screen. Tap the target
(+) with a stylus as it moves from the center to the four corners of the screen.
If the system detects the touch too far from the target, the calibration must be done again from the
beginning. When all the positions have been successfully tapped, the target ceases to be displayed
and the following message appears: "Press the ENT key to accept the new setting". Press the ENT
key to register the calibration data and terminate the function. Proceed to “Date and Time
Settings”.
Do not use an item with a sharp edge, such as a pencil or ballpoint pen, for tapping the screen, as
this may damage or break the screen. Do not place the palm of your hand on the screen when
tapping it.
Tap the center of the target with the
stylus. Repeat as the target moves
around the screen.
Press the SFT+BKS key to cancel.
TeamPad 500 User’s Guide
Copyright 2001 by Fujitsu-ICL Systems Inc.
10 of 47
2.3
2.32.3
2.3 Date and Time Settings
Set the date and time and tap the OK button.
[1] Time zone
Select your local time zone. Use the drop down list to display the possible choices and then
select one. .
[2] Calendar
Switch the calendar to current year, month, and day. Use either the arrow’s next to the
month and year to scroll to the desire month and year, or tap on the month or year to
change them.
[3] Current time
Set the time based on a 24-hour clock. After either selecting the hours, minutes or seconds,
use the arrow keys or keyboard to change to the desire time.
[4] OK and Apply Button
Register the date and time that you have set and proceed to Section 3.
[5] Xbutton
Cancel the date & time process and proceed to Section 3.
Table of contents
Other Fujitsu Handheld manuals
Fujitsu
Fujitsu Arrows NX F-01J User manual
Fujitsu
Fujitsu TeamPad PBT7500-16 User manual
Fujitsu
Fujitsu Pocket Loox T810 User manual
Fujitsu
Fujitsu iPAD100 series User manual
Fujitsu
Fujitsu LOOX600 User manual
Fujitsu
Fujitsu Pocket LOOX 600 Product information sheet
Fujitsu
Fujitsu 200 User manual
Fujitsu
Fujitsu TeamPad 500 User manual
Fujitsu
Fujitsu 200 User manual
Fujitsu
Fujitsu IPAD100-20 User manual
