Fujitsu Power Select D2703-S User manual

Issue May 2009

Product Power Select

Power Select

Pages 6

Brief Description

The Power Select feature of specific Fujitsu Siemens Computers mainboards

(such as the D2703-S) offers additional power supply options; this allows an

integration of these boards in various applications, in particular in industrial

environments.

Benefits

•Flexible options for supplying operating power to the mainboard

▬Standard ATX supply via onboard connector

▬24 V DC supply via onboard connector

▬24 V DC supply via external connector / AC adapter

•These options enable effective system integration solutions particularly in industrial environments where

standard solutions can’t meet specific requirements (e.g. SELV environment).

Power Select on the Mainboard D2703-S

Product Facts Issue: May 2009 Product: Power Select Page 2 / 6

Functional Description

The Power Select feature of specific Fujitsu Technology Solutions mainboards provides additional power supply

options for the system beyond the standard ATX power supply method. This is useful e.g. in industrial

applications where tough requirements exist concerning chassis and housing design; these requirements often

can’t be met when using standard components for mainboard, power supply and housing.

The D2703-S is a Fujitsu Technology Solutions mainboard with Power Select; this board is used as an example

in the following sections to illustrate the technology.

Power Select offers three different power supply options:

•Standard ATX supply via onboard connector

•24 V DC supply via onboard connector

•24 V DC supply via external connector / AC adapter

Typical Application Fields for Power Select

Standard ATX power supply

•Industrial designs based on standard or open-frame ATX compliant power supplies

•Any designs that require enhanced power for additional components (high-current controllers, several hard

disk drives or optical drives, etc.)

24 V DC supply via onboard connector

•Industrial applications using an existing 24 V infrastructure

•Applications that require 24 V supply via lockable power supply connector

•Avoids need for expensive DC/DC-converters in applications that require SELV (= Safety Extra Low

Voltage) according IEC60950-1

24 V DC supply via external connector / AC adapter

•Enables small chassis design (no space for power supply required)

•Enables silent chassis designs (no effort for cooling of internal power supply)

•Best choice for small and low-power system design

•Enables design with reduced safety risk and effort by using approved AC adapter according IEC60950-1

Power Select Specifications

Important Note

•The internal power supply input (ATX connector) and external 24 V DC input shall under no circumstances

be operated simultaneously, as this will cause irreparable damage to the mainboard.

•If for any reason the power supply input is changed from internal to external or vice versa (e.g. for

evaluation tests), make sure to wait at least 5 minutes after disconnecting the internal power input and

connecting the external power input or vice versa. Otherwise, the remaining charge of onboard capacitors

may cause irreparable damage to the mainboard.

Any damage caused by misuse of the power supply inputs is excluded from the standard warranty. Fujitsu

Technology Solutions cannot be held liable for any damages that result from inappropriate use of the power

supply inputs.

Product Facts Issue: May 2009 Product: Power Select Page 3 / 6

ATX compliant Power Supply Option (internal connector)

The mainboard D2703-S offers a standard ATX power supply connector as shown in the figure and table below.

Figure ATX Power Supply Connector

Table ATX Power Supply Connector Pin Assignment (D2703-S)

Pin Signal Assignment Pin Signal Assignment

1 +3.3 V 11 +3.3 V

2 +3.3 V 12 -12 V

3 ATX Detect (low asserted) 13 GND

4 +5 V 14 PS on (low asserted)

5 GND 15 GND

6 +5 V 16 GND

7 GND 17 GND

8 Powergood (high asserted) 18 +24 V

9 +5 V

AUX

(Auxiliary) 19 +5 V

10 +12 V 20 +5 V

Notes to Pin Assigment

•The mainboard D2703-S uses pin 18 of the ATX connector for an internal single 24 V DC supply (see

section “24 V DC power supply option” below for details).

•Typically pin 18 of a standard ATX power supply is “not connected”. Former ATX power supplies provided -

5 V via pin 18 which is no longer required for state-of-the-art mainboards.

•If the ATX power supply used for a specific implementation still delivers -5 V via pin 18, this causes no

damage to the mainboard D2703-S.

•In general, pin 3 of an ATX power supply is connected to GND. The mainboard D2703-S uses pin 3 to

detect if an ATX power supply is connected or not.

•Instead of a standard 20-pin ATX power supply, a 24-pin BTX power supply can be connected to the

mainboard D2703-S as well. Pins 21 to 24 will not be used.

The following table lists the requirements for the electrical characteristics that must be met by an ATX power

supply to operate a D2703-S mainboard properly. Please also pay attention to the specific notes.

•During power-on/power-off, the power supply must fulfill the general ATX requirements regarding ramp-

up/down timing for all supply voltages and the Powergood output.

•The ATX power supply input of the D2703-S has capacitive loads which need to be covered by the power

supply during power ramp-up. See the table below for the capacitance values on each voltage rail.

•The ATX power supply must be approved according to IEC60950-1.

Table ATX Power Supply Requirements (D2703-S)

Source

(ATX / BTX) Voltage PS Load (min),

see note 1) Tolerance

(max) Mainboard

Current (typ.),

see note 2)

Mainboard

Current (max),

see note 3)

Capacitive Input

Load

Main Power +12 V 0.15 A ± 5% 0.7 A 2.8 A 1000 µF

Product Facts Issue: May 2009 Product: Power Select Page 4 / 6

Source

(ATX / BTX) Voltage PS Load (min),

see note 1) Tolerance

(max) Mainboard

Current (typ.),

see note 2)

Mainboard

Current (max),

see note 3)

Capacitive Input

Load

-12 V 0 A ± 10% ~ 20 mA ~ 20 mA 10 µF

+5 V 1 A ± 5% 1.5 A 3 A 470 µF

Rails

+3.3 V 0.3 A ± 5% 0.6 A 0.6 A 500 µF

Auxiliary Rail +5 V

AUX

0.1 A ± 5% 0.15 A 0.15 A; note 4) 1000 µF

Notes to ATX Power Supply Requirements

1) The ATX power supply must support these minimum load conditions for a mainboard incl. processor and

memory if there is no power consumption by any additional components (e.g. drives, LVDS, PCI

adapters, USB devices)

2) Configuration: Turion TL-52; 2 x 1 GB, Windows XP Idle mode (w/o any add-in cards, w/o LVDS)

3) Configuration: Turion TL-66 (max. 35 W), 2 x 2 GB, Windows XP, 100% processor load (w/o any add-in

cards, w/o LVDS)

4) In order to support any USB devices in all operating conditions the power supply should be able to

provide 2 A @ +5 VAUX

24V DC Power Supply Option (internal connector)

The ATX power supply connector previously offered the option to provide -5 V via pin 18 to the mainboard, which

is no longer used for current designs. Thus, the mainboard D2703-S can be powered via pin 18 of the ATX power

supply connector with 24 V DC. The return path (GND) can be connected to pin 17.

Figure 24 V DC Power Supply Option, Internal Connector

Product Facts Issue: May 2009 Product: Power Select Page 5 / 6

24V DC Power Supply Option (external connector)

The mainboard D2703-S also provides a DC connector at the rear I/O shield for an external AC adapter.

Figure 24 V DC Power Supply Option, External Connector

The DC plugs used with this connector should have the following characteristics (see also figure below):

•Inner/outer diameter 2.5 / 5.5 mm

•Contact Length 10 to 11 mm

•Straight or right-angle plug

Figure Appropriate DC Plugs for External AC Adapters

Product Facts Issue: May 2009 Product: Power Select Page 6 / 6

and delivery subject to availability. Any liability that the data and illustrations are complete, actual

or correct is excluded. Designations may be trademarks and/or copyrights of the respective

manufacturer, the use of which by third parties for their own purposes may infringe the rights of

such owner. For further information see: ts.fujitsu.com/terms_of_use.html

Published by department:

Fujitsu Technology Solutions GmbH

Clients Group, Systemboard OEM

Buergermeister-Ulrich-Str. 100

86199 Augsburg, Germany

Company stamp

Basic Requirements for 24V DC Supply (internal or external)

•Supply via internal ATX power supply connector (Pin 18) or via external DC connector

•Max. DC operating range: 24 V +10%/-15%

•Max. ripple/noise: 400 mV (PP)

•Max. input current: 5 A

•The 24 V DC power supply input of the mainboard D2703-S provides a capacitive load of 700 µF which

has to be covered by the AC adapter respectively the 24 V DC source during power ramp-up.

•Any external AC adapter must be approved according to IEC60950-1.

Restrictions for 24V DC Supply (internal or external)

•In 24 V DC supply mode, the maximum output power available via the D2703-S mainboard connectors

(PCI/PCIe connectors, USB connectors, GPI/O, backlight connector, Firewire™ connector and drive power

connector) is limited. See the table below for the maximum allowed values on the different voltage levels.

•In 24 V DC supply mode, also the maximum capacitive load for the onboard voltage sources is limited. See

the table below for the maximum allowed values on the different voltage levels.

Table Maximum Output Power and Capacitive Load (D2703-S) in 24 V Operating Mode

Voltage Maximum Output Current Maximum Capacitive Load

+12 V 2.3 A 470 µF

-12 V 0.1 A 470 µF

+5 V 4.5 A 1000 µF

+3.3 V 5 A 1000 µF

+5 V

AUX

n/a 470 µF

Additional information and downloads

•

General Information:

www.ts.fujitsu.com/mainboards

•Documentation and downloads:

ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/

Contact: Fujitsu Technolgy Solutions GmbH:

Peter Hoser / Director OEM Sales, Clients Group, Systemboard OEM

Phone: +49 (0) 821 - 804 3177

Fax: +49 (0) 821 – 804 3329

Email: [email protected]

Table of contents

Other Fujitsu Computer Hardware manuals

Fujitsu

Fujitsu PRIMEPOWER B23Q8YA-G-02-E Assembly Instructions

Fujitsu

Fujitsu CELSIUS W410 User manual

Fujitsu

Fujitsu MB2147-01 Installation and operating instructions

Fujitsu

Fujitsu MB90890 Series User manual

Fujitsu

Fujitsu FUTRO S550-2 User manual

Fujitsu

Fujitsu GP5-FC102 User manual

Fujitsu

Fujitsu MB2147-541 User manual

Fujitsu

Fujitsu MB2145-507 User manual

Fujitsu

Fujitsu PRIMERGY LTO2 User manual

Fujitsu

Fujitsu PRIMERGY Tape Drv DAT72 User manual

Fujitsu

Fujitsu PG-1863 User manual

Fujitsu

Fujitsu 560H SERIES User manual

Fujitsu

Fujitsu Oracle M10-1 User manual

Fujitsu

Fujitsu CELSIUS W380 User manual

Fujitsu

Fujitsu F2 MC-8FX Family User manual

Fujitsu

Fujitsu FM3 family User manual

Fujitsu

Fujitsu FibreCAT TXF User manual

Fujitsu

Fujitsu MB2031-20 User manual

Fujitsu

Fujitsu 467 User manual

Fujitsu

Fujitsu F2MC-8FX MB2146-213 User manual

Fujitsu

Fujitsu Semiconductor Controller MB89950/950A User manual

Fujitsu

Fujitsu FPT-20P-M06 User manual

Fujitsu

Fujitsu MB91460 SERIES FR60 User manual

Fujitsu

Fujitsu PRIMERGY TX150 S2 User manual

Popular Computer Hardware manuals by other brands

EMC2

EMC2 VNX Series Hardware Information Guide

Panasonic

Panasonic DV0PM20105 Operation manual

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 user manual

Gigabyte

Gigabyte B660M DS3H AX DDR4 user manual

Raidon

Raidon iT2300 Quick installation guide

National Instruments

National Instruments PXI-8186 user manual

Hauppauge

Hauppauge WinTV-HVR-2250 Quick installation guide

Kontron

Kontron CP6002 user guide

Manhattan

Manhattan 702843 user manual

Aphex

Aphex 230 instruction manual

AMD

AMD Phenom II Product data sheet

Intel

Intel NUC 12 Pro user guide

dbx

dbx Zone Pro 1260 user manual

Galaxy

Galaxy GHDX2-2430S-24F4D Installation and hardware reference manual

Intel

Intel AXXRMFBU4 Quick installation user's guide

Kontron

Kontron DIMM-PC/MD product manual

ST X-NUCLEO-SAFEA1B How to use

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 installation manual