FujiFilm X-T2 User manual
BL00004989-200 EN
New Features Guide
Version 4.20
Features added or changed as a result of rmware updates
may no longer match the descriptions in the documentation
supplied with this product. Visit our website for information
on the updates available for dierent products:
http://www.fujifilm.com/support/digital_cameras/software/fw_table.html
Contents
X-T2 rmware version 4.20 adds or updates
the features listed below. For the latest manual,
visit the following website.
http://fujifilm-dsc.com/en/manual/
No. Description X-T2
P
See
PVer.
1
1
To view separate RGB histograms and a display
showing areas of the frame that will be overex-
posed at current settings superimposed on the
view through the lens, press the function button
to which HISTOGRAM is assigned.
22 1 3.00
2
2
The focus stick can be used to change focus areas
when the display is zoomed in during checking
focus.
83 2 *
3
3A ZFOCUS BKT item has been added to drive
modes.
95,
97 3 4.10
4
4
A ZFOCUS BKT option has been added to
ASHOOTING SETTING> DRIVE SETTING>
BKT SETTING> BKT SELECT in the shooting
menu.
150 4 4.10
5
5
A FOCUS BKT option has been added to
ASHOOTING SETTING> DRIVE SETTING>
BKT SETTING in the shooting menu.
150 5 4.10
6
6
A FLICKER REDUCTION option has been add-
ed to ASHOOTING SETTING in the shooting
menu.
155 7 4.10
No. Description X-T2
P
See
PVer.
7
7
A FULL HD HIGH SPEED REC option has been
added to BMOVIE SETTING in the shooting
menu.
167 8 4.10
8
8
A PERIPHERAL LIGHT CORRECTION (MOVIE)
option has been added to
B
MOVIE SETTING in
the shooting menu.
167 9 4.10
9
9
Changes have been made to the content of the
BMOVIE SETTING> 4K MOVIE OUTPUT
option in the shooting menu.
168 10 4.10
10
10
A FULL HD MOVIE OUTPUT option has been
added to
B
MOVIE SETTING in the shooting
menu.
168 11 4.10
11
11
A histogram has been added to the photo in-
formation that can be displayed by pressing the
selector up during full-frame playback.
175 12 3.00
12
12
An APERTURE UNIT FOR CINEMA LENS op-
tion has been added to DSCREEN SETTING
in the setup menu.
221 13 4.10
13
13
LARGE INDICATORS MODE(EVF) and
LARGE INDICATORS MODE(LCD) options
have been added to DSCREEN SETTING in
the setup menu.
222 14
15 4.10
14
14
A
LARGE INDICATORS DISP. SETTING op-
tion has been added to
D
SCREEN SETTING in
the setup menu.
222 16 4.10
15
15 A SELECT FOLDER option has been added to
DSAVE DATA SETTING in the setup menu. 241 17 4.20
No. Description X-T2
P
See
PVer.
16
16
TheDCONNECTION SETTING> PC SHOOT
MODE option in the setup menu has changed to
PC CONNECTION MODE.
247 18 3.00
17
17 Third-party studio flash commanders compatible
with the FUJIFILM flash system can now be used. 265 20 3.00
18
18
In addition to the instax SHARE printers listed
in “Accessories from FUJIFILM”, the camera now
supports the SP-3.
307 21 3.00
N
The asterisks in the “Ver.” column indicate features available in
earlier versions; only the descriptions in the manual have been
changed.
1
Changes and Additions
Changes and additions are as follows.
X-T2 (Version 2.10) Owner’s Manual: P22 Ver. 3.00
Customizing the Standard Display
Histograms
Histograms show the distribution of tones in the image. Brightness is
shown by the horizontal axis, the number of pixels by the vertical axis.
Number of
pixels
Shadows Highlights
Pixel brightness
• Optimal exposure: Pixels are distributed in an
even curve throughout the tone range.
• Overexposed: Pixels are clustered on the right
side of the graph.
• Underexposed: Pixels are clustered on the left
side of the graph.
To view separate RGB histograms and a dis-
play showing areas of the frame that will be
overexposed at current settings superim-
posed on the view through the lens, press
the function button to which HISTOGRAM
is assigned.
AOverexposed areas blink
BRGB histograms
AB
2
X-T2 (Version 2.10) Owner’s Manual: P83 *
The Focus-Point Display
Checking Focus
To zoom in on the current focus area
for precise focus, press the control to
which focus zoom has been assigned
(at default settings, the center of the rear
command dial). Press the control again
to cancel zoom.
M M
Normal display Focus zoom
N
In focus mode S, zoom can be adjusted by rotating the
rear command dial when STANDARD or FOCUS PEAK
HIGHLIGHT is selected for GAF/MF SETTING> MF
ASSIST. Focus area selection using the focus stick is
available during focus zoom. Focus zoom is not avail-
able in focus mode Cor when GAF/MF SETTING>
PRE-AF is on or an option other than rSINGLE POINT
is selected for AF MODE.
Use
D
BUTTON/DIAL SETTING> Fn/AE-L/AF-L BUTTON
SETTING to change the function performed by the center
of the command dial or assign its default function to other
controls.
3
X-T2 (Version 2.10) Owner’s Manual: P95 Ver. 4.10
Bracketing
2 Navigate to DRIVE SETTING in the ASHOOTING
SETTING menu and select OAE BKT, WISO
BKT, XFILM SIMULATION BKT, VWHITE
BALANCE BKT, YDYNAMIC RANGE BKT, or
ZFOCUS BKT.
X-T2 (Version 2.10) Owner’s Manual: P97 Ver. 4.10
ZFOCUS BKT
Each time the shutter button is pressed, the cam-
era takes a series of photos, varying focus with each
shot. The number of shots, the amount focus chang-
es with each shot, and the interval between shots
can be selected using ASHOOTING SETTING>
DRIVE SETTING> BKT SETTING> FOCUS BKT.
4
X-T2 (Version 2.10) Owner’s Manual: P150 Ver. 4.10
BKT SETTING
Option
Option
Description
Description
BKT SELECT
Choose from OAE BKT, WISO BKT, XFILM
SIMULATION BKT, VWHITE BALANCE BKT,
YDYNAMIC RANGE BKT, and ZFOCUS BKT.
5
X-T2 (Version 2.10) Owner’s Manual: P150 Ver. 4.10
FOCUS BKT
Option
Option
Description
Description
FOCUS BKT
The following settings are available when BKT SELECT
is chosen for
Z
FOCUS BKT.
Option
Option
Description
Description
FRAMES Choose the number of shots.
STEP Choose the amount focus changes with
each shot.
INTERVAL Choose the interval between shots.
N
• Do not adjust zoom during shooting.
• The supplied flash does not fire.
6
Focus and FRAMES/STEP
The relation between focus and the options chosen for
FRAMES and STEP is shown in the illustration.
12345
:
Starting focus position
• Focus proceeds from the starting position toward infinity.
• Small STEP values translate to small changes in focus, larger
values to larger changes.
• Regardless of the option chosen for FRAMES, shooting ends
when focus reaches infinity.
Frames
Step
Other manuals for X-T2
3
Table of contents
Other FujiFilm Digital Camera manuals
FujiFilm
FujiFilm FINEPIX JZ700 Series User manual
FujiFilm
FujiFilm FinePix Z70 series User manual
FujiFilm
FujiFilm instax mini 70 User manual
FujiFilm
FujiFilm instax Pal User manual
FujiFilm
FujiFilm X-A1 Owner's manual
FujiFilm
FujiFilm X-T30 Owner's manual
FujiFilm
FujiFilm Instax Square SQ 6 User manual
FujiFilm
FujiFilm FinePix S1 Pro Quick start guide
FujiFilm
FujiFilm FINEPIX SL240 SERIES User manual
FujiFilm
FujiFilm FinePix F550EXR User manual
FujiFilm
FujiFilm FinePix S602 Zoom User manual
FujiFilm
FujiFilm FinePix E550 User manual
FujiFilm
FujiFilm FinePix F410Z User manual
FujiFilm
FujiFilm FINEPIX JZ500 series User manual
FujiFilm
FujiFilm Finepix F770EXR User manual
FujiFilm
FujiFilm FinePix F470 User manual
FujiFilm
FujiFilm FinePix S5200 User manual
FujiFilm
FujiFilm FinePix A607 User manual
FujiFilm
FujiFilm X-M1 User manual
FujiFilm
FujiFilm X-E4 User manual
