FujiFilm X-T2 Owner's manual
BL00004953-200 EN
New Features Guide
Version 3.00
Features added or changed as a result of rmware updates may
no longer match the descriptions in the documentation sup-
plied with this product. Visit our website for information on the
updates available for dierent products:
http://www.fujifilm.com/support/digital_cameras/software/fw_table.html
Contents
The following changes or additions have been
made to features described in the X-T2 Version
2.10 owner’s manual.
No. Description X-T2
P
See
PVer.
1
1
To view separate RGB histograms and a display
showing areas of the frame that will be overex-
posed at current settings superimposed on the
view through the lens, press the function button
to which HISTOGRAM is assigned.
22 1 3.00
2
2
The focus stick can be used to change focus areas
when the display is zoomed in during checking
focus.
83 2 *
3
3
A histogram has been added to the photo in-
formation that can be displayed by pressing the
selector up during full-frame playback.
175 3 3.00
4
4
TheDCONNECTION SETTING> PC SHOOT
MODE option in the setup menu has changed to
PC CONNECTION MODE.
247 4 3.00
5
5Third-party studio flash commanders compatible
with the FUJIFILM flash system can now be used. 265 6 3.00
6
6
In addition to the instax SHARE printers listed
in “Accessories from FUJIFILM”, the camera now
supports the SP-3.
307 7 3.00
N
The asterisks in the “Ver.” column indicate features available in
earlier versions; only the descriptions in the manual have been
changed.
1
Changes and Additions
Changes and additions are as follows.
X-T2 (Version 2.10) Owner’s Manual: P22
Customizing the Standard Display
Histograms
Histograms show the distribution of tones in the image. Brightness is
shown by the horizontal axis, the number of pixels by the vertical axis.
Number of
pixels
Shadows Highlights
Pixel brightness
• Optimal exposure: Pixels are distributed in an
even curve throughout the tone range.
• Overexposed: Pixels are clustered on the right
side of the graph.
• Underexposed: Pixels are clustered on the left
side of the graph.
To view separate RGB histograms and a dis-
play showing areas of the frame that will be
overexposed at current settings superim-
posed on the view through the lens, press
the function button to which HISTOGRAM
is assigned.
AOverexposed areas blink
BRGB histograms
AB
2
X-T2 (Version 2.10) Owner’s Manual: P83
The Focus-Point Display
Checking Focus
To zoom in on the current focus area
for precise focus, press the control to
which focus zoom has been assigned
(at default settings, the center of the rear
command dial). Press the control again
to cancel zoom.
MM
Normal display Focus zoom
N
In focus mode S, zoom can be adjusted by rotating the
rear command dial when STANDARD or FOCUS PEAK
HIGHLIGHT is selected for GAF/MF SETTING> MF
ASSIST. Focus area selection using the focus stick is
available during focus zoom. Focus zoom is not avail-
able in focus mode Cor when GAF/MF SETTING>
PRE-AF is on or an option other than rSINGLE POINT
is selected for AF MODE.
Use
D
BUTTON/DIAL SETTING> Fn/AE-L/AF-L BUTTON
SETTING to change the function performed by the center
of the command dial or assign its default function to other
controls.
3
X-T2 (Version 2.10) Owner’s Manual: P175
The DISP/BACK Button
Viewing Photo Information
The photo information display changes
each time the selector is pressed up.
Basic data Histogram
12/31/2050 10:00 AM
BACK
1/4000
S.S
5.6
F400 +21/3
ISO
LENS
23.0
mm
F
5.6
FOCAL LENGTH
23.0
mm
COLOR SPACE sRGB
LENS MODULATION OPT.
ON
NEXT
12/31/2050 10:00 AM
Info display 2 Info display 1
4
X-T2 (Version 2.10) Owner’s Manual: P247
PC CONNECTION MODE
Adjust settings for connection to a computer.
Option
Option
Description
Description
USB CARD READER
Connecting the camera to a computer via USB
automatically enables data transfer mode, al-
lowing data to be copied to the computer. The
camera functions normally when not connected.
USB TETHER
SHOOTING AUTO
Connecting the camera to a computer via USB
automatically enables tethered shooting mode.
You can also use FUJIFILM X Acquire to save and
load camera settings, allowing you to reconfi
gure the camera in an instant or share settings
with other cameras of the same type. The camera
functions normally when not connected.
USB TETHER
SHOOTING FIXED
The camera functions in tethered shooting
mode even when not connected to a comput-
er. At default settings, pictures are not saved to
the memory card, but pictures taken while the
camera is not connected will be transferred to
the computer when it is connected.
WIRELESS TETHER
SHOOTING FIXED
Choose this option for wireless remote photogra-
phy. Select a network using DCONNECTION
SETTING> WIRELESS SETTINGS.
5
Option
Option
Description
Description
USB RAW CONV./
BACKUP RESTORE
Connecting the camera to a computer via USB
automatically enables USB RAW conversion/
backup restore mode. The camera functions nor-
mally when not connected.
• USB RAW CONV. (requires FUJIFILM X RAW STUDIO):
Use the camera’s image processing engine to
rapidly convert RAW files to high-quality JPEG
images.
• BACKUP RESTORE (requires FUJIFILM X Acquire):
Save and load camera settings. Reconfigure
the camera in an instant or share settings with
other cameras of the same type.
O
DPOWER MANAGEMENT> AUTO POWER OFF also
apply during tethered shooting. Select OFF to prevent
the camera turning o automatically.
N
Tethered shooting is available with software such as
Hyper-Utility Software HS-V5 (available separately) or
FUJIFILM X Acquire (available for free download from the
FUJIFILM website) or when the FUJIFILM Tether Shooting
Plug-in PRO or Tether Shooting Plug-in (both available
separately) is used with Adobe® Photoshop® Lightroom®.
6
X-T2 (Version 2.10) Owner’s Manual: P265
Flash Settings
Third-party studio ash commanders compatible
with the FUJIFILM ash system can now be used. For
more information, see the documentation provided
your studio ash unit.
7
X-T2 (Version 2.10) Owner’s Manual: P307
Accessories from FUJIFILM
instax SHARE printers
instax SHARE printers
SP-1/SP-2/SP-3: Connect via wireless LAN to print pictures on instax
film.
Other manuals for X-T2
3
Table of contents
Other FujiFilm Digital Camera manuals
FujiFilm
FujiFilm XQ1 User manual
FujiFilm
FujiFilm X-A20 User manual
FujiFilm
FujiFilm FinePix E550 Assembly instructions
FujiFilm
FujiFilm Finepix SL1000 series User manual
FujiFilm
FujiFilm Finepix S700 User manual
FujiFilm
FujiFilm Discovery S1200 User manual
FujiFilm
FujiFilm FinePix T300 Series User manual
FujiFilm
FujiFilm X-T2 User manual
FujiFilm
FujiFilm FinePix F11 User manual
FujiFilm
FujiFilm FINEPIX S91 00 Series User manual
FujiFilm
FujiFilm FinePix Z33WP User manual
FujiFilm
FujiFilm FINEPIX JZ310 series User manual
FujiFilm
FujiFilm X-T3 User manual
FujiFilm
FujiFilm FinePix S304 User manual
FujiFilm
FujiFilm X70 User manual
FujiFilm
FujiFilm FinePix 40i User manual
FujiFilm
FujiFilm X100T User manual
FujiFilm
FujiFilm FinePix Z30 User manual
FujiFilm
FujiFilm DS-330 User manual
FujiFilm
FujiFilm FUJICA STX-1 User manual
