FSR T3-IPS User manual

FSR 244 Bergen Boulevard, Woodland Park, NJ 07424, Phone: 973.785.4347 - Fax: 973.785.4207

43077 LIT1534

T3-IPS / HV-T3 CABLE RETRACTOR INSTALLATION INSTRUCTIONS

GUIDE BRACKET

T3-IPS (SOLD SEPERATELY)

HANGER SUPPORT

1. PRIOR TO INSTALLING T3-IPS ASSEMBLY (SOLD SEPERATELY) INTO

TABLE (SEE T3-IPS INSTALLATION INSTRUCTIONS), INSERT GUIDE

BRACKET INTO T3-IPS AND SECURE WITH #6 PAN HEAD SCREWS.

(4) #6 PAN HEAD SCREW

2. DETERMINE WHICH SIDE RETRACTOR WILL BE LOCATED

(LEFT-SIDE MOUNTING SHOWN) AND MOUNT HANGER SUPPORT

AGAINST FRONT SIDE OF T3 MOUNTING BRACKET AND CHASSIS

SIDE WITH #6 HARDWARE.

(2) #6 SELF TAPPING

SCREW

CHASSIS SIDE

BACK SIDE OF

T3 MOUNTING

BRACKET

EDGE AGAINST CHASSIS SIDE

FACE AGAINST FRONT SIDE

OF T3 MOUNTING BRACKET

BACK OF T3-IPS

ASSEMBLY

6a. ALIGN RING-PIN HOLES AND INSERT RING-PIN ON ASSEMBLY. FOR

THE ADDITIONAL SECURITY OF A TAMPER-PROOF INSTALLATION,

INSTALL #6-32 x 1/4 LONG FLAT HEAD SCREW, AS SHOWN.

RING-PIN

CLEVIS PIN

6b. LOOSEN ADJUSTABLE HANGER WINGNUT. ALIGN ADJUSTABLE

HANGER HOLES WITH RETRACTOR FLANGE HOLES, ENSURING THE

HANGER IS VERTICAL AS POSSIBLE, AND INSERTCLEVIS PIN. SECURE

CLEVIS PIN WITH HAIR-PIN COTTER.

6c. LIFT RETRACTOR ASSEMBLY TO TAKE UP ALL SLACK AND TIGHTEN

ADJUSTABLE HANGER WINGNUT TO ENSURE ASSEMBLY WEIGHT IS

CARRIED BY THE TABLE. HANGER NUT CAN BE TIGHTENED FOR

ADDITIONAL INSTALLATION SECURITY.

ADJUSTABLE HANGER

NUT LOCATED ON

OPPOSITE SIDE

OF WINGNUT

HAIRPIN-COTTER

#6 FLAT HEAD SCREW FOR

TAMPER-PROOF INSTALLATION

NOZZLE

CAPTURE

BRACKET

(RIGHT)

3. INSTALL ADJUSTABLE HANGER ONTO HANGER SUPPORT WITH CLEVIS

PIN AND SECURE WITH HAIR-PIN COTTER.

CLEVIS PIN

ADJUSTABLE HANGER

HAIR-PIN COTTER

NOTE WINGNUT LOCATION

NOZZLE

CAPTURE

BRACKET

(LEFT)

CHASSIS SUPPORT BRACKET

(2) #6 FLAT HEAD SCREW

#6 FLAT

HEAD

SCREW

#6 PAN HEAD SCREW

4. INSTALL NOZZLE CAPTURE AND SUPPORT BRACKETS

ONTO RETRACTOR WITH #6 HARDWARE.

RETRACTOR

5. SLIDE RETRACTOR ASSEMBLY UP INTO T3-IPS ASSEMBLY.

RING-PIN HOLE

RETRACTOR ASSEMBLY

THE RETRACTOR "NOZZLE" ASSEMBLY MAY REQUIRE

LOOSENING IN ORDER TO EASILY INSTALL THE

NOZZLE CAPTURE BRACKET. REMOVE THE UPPER

NOZZLE-FIXING SCREW AND LOOSEN THE LOWER

SCREW - THIS WILL ALLOW THE NOZZLE TO TILT AND

ALLOW INSTALLATION OF THE CAPTURE BRACKET.

ONCE THE CAPTURE BRACKET IS LOCATED, AND

BEFORE FASTENING IT IN PLACE, RE-INSTALL THE

UPPER NOZZLE-FIXING SCREW, AND TIGHTEN BOTH

FIXING SCREWS. INSTALL AND TIGHTEN THE

CAPTURE BRACKET SECURING SCREWS TO

COMPLETE THIS PART OF THE INSTALLATION.

NOTE:

RETRACTOR

NOZZLE

UPPER NOZZLE-

FIXING SCREW

(REMOVE)

LOWER NOZZLE-

FIXING SCREW

(LOOSEN)

This manual suits for next models

Table of contents

Other FSR Cable Box manuals

FSR

FSR FL-1550 User manual

Popular Cable Box manuals by other brands

FBS

FBS C01 installation instructions

peerless-AV

peerless-AV IBA2 Installation and assembly

Extron electronics

Extron electronics Cable Cubby 1202 installation guide

peerless-AV

peerless-AV IBA3AC Installation and assembly

Channel Vision

Channel Vision AFFINITY P-0328 instructions

Minebea Intec

Minebea Intec IE11357 operating instructions

StarTech.com

StarTech.com BOX4CABLE manual

Commercial Electric

Commercial Electric 5053-WH installation guide

Motorola

Motorola DCT6412 DUAL-TUNER DVR AND HD SET-TOP - MICROSOFT... User's reference manual

Renkforce

Renkforce 1395556 operating instructions

Huawei

Huawei FAT9102SD-32G Quick installation guide

VISSEM Electronics

VISSEM Electronics Opticube VSOF-OTB-E manual

Beta

Beta 1844 15-H05/SCK Instructions for use

Renkforce

Renkforce 1674559 operating instructions

Minebea Intec

Minebea Intec PR 6130/64Sa installation manual

KS Tools

KS Tools efuturo Wallbox operating instructions

Chatsworth Products

Chatsworth Products Evolution installation instructions

Minebea Intec

Minebea Intec Weighbridge PR 6021/68S installation manual