FS S5800 Series User manual
S5850 and S8050 Series
Switches Reset and Recovery
System Configuration Guide
Models: S5850-24T16S; S5850-24T16B; S5850-32S2Q
S5850-48S6Q; S5850-48T4Q; S5850-48S2Q4C
S8050-20Q4C
S5850 AND S8050 SERIES SWITCHESRESET AND RECOVERY SYSTEM CONFIGURATION GUIDE
I
www.fs.com
Contents
1. Configuration Considerations.............................................................................................................................................................. 1
2. NetworkTopology.................................................................................................................................................................................. 1
3. Operation Steps......................................................................................................................................................................................1
3.1 Connection Equipment....................................................................................................................................................................1
3.2 Download Configuration Software..................................................................................................................................................1
3.3 Switch on and Use Login Software.................................................................................................................................................. 1
3.4 Restoration System.......................................................................................................................................................................... 2
3.5 Switch to Factory Reset....................................................................................................................................................................3
S5850 AND S8050 SERIES SWITCHESRESET AND RECOVERY SYSTEM CONFIGURATION GUIDE
1
www.fs.com
1. Configuration Considerations
Table 1 products and versions for example.
Series
Product
S5800 Series,
S5850 and S8050 Series
S5800-8TF12S/S5800-48F4S/S5800-48F4SR/S5800-48T4S
S5850-24T16S/S5850-24T16B/S5850-48S2Q4C
S5850-48S6Q/S5850-32S2Q/S5850-48T4Q/S8050-20Q4C
2. Network Topology
3. Operation Steps
3.1 Connection Equipment
#According to the way of networking topo to connect PC and switch to network cable and Console. One end of the RJ-45
network cable is connected to the PC NIC, and the other end is connected to the SW's network port. Connect one end of
Console line USB to PC's USB interface, and the other end of RJ-45 is connected to console interface of front panel of switch.
3.2 Download Configuration Software
#After the connection is completed, there we recommend the super terminal, putty or Secure CRT tool to configure the switch.
3.3 Switch on and Use LoginSoftware
#Energizing the switch, then open the installed login software, select the serial port of login mode, port through the device
manager to determine. Baud rate :115200, Data bits: 8, Parity: None, Stop bits: 1. (Reference below)
S5850 AND S8050 SERIES SWITCHESRESET AND RECOVERY SYSTEM CONFIGURATION GUIDE
2
www.fs.com
NOTE: COM Number can be viewed through device manager. (right click on my computer.>manage>device manager>port (COM
and LPT). If it displays an unrecognized USB device, please download and install the corresponding driver.
3.4 Restoration System
*Set PC ip address
*Then prepare tftp
S5850 AND S8050 SERIES SWITCHESRESET AND RECOVERY SYSTEM CONFIGURATION GUIDE
3
www.fs.com
*After the connection is completed, power the switch (or power off and restart). During startup, when a
countdown prompt appears to enter Uboot mode (as shown in Figure 2), press "Ctrl + B" to enter Uboot
mode.
*Set ip address
bootrom:> setenv ipaddr 192.168.1.1
bootrom:> saveenv
bootrom:> setenv netmask 255.255.255.0
bootrom:> saveenv
*Specify the IP of the TFTP server
bootrom:> setenv serverip 192.168.1.2
bootrom:> saveenv
bootrom:> setenv gatewayip 192.168.1.2
bootrom:> saveenv
*Load the mirror boot system from the TFTP server
bootrom:> boot_tftp FSOS-S5850-Series-v6.2.27.r.bin
*Enter the system.
..........
Loading startup configuration file…… Done!
Mon Jan 1 00:01:20 UTC 2001
Ready to service!
Switch> enable
Switch#
S5850 AND S8050 SERIES SWITCHESRESET AND RECOVERY SYSTEM CONFIGURATION GUIDE
4
www.fs.com
NOTE:
1. Attention should be paid to the following issues when loading images through TFTP servers :
Ensure that you are properly configured as a TFTP server;
Ensure that Switch routes to TFTP servers are accessible. If there is no router for routing communication between
subnetworks, switches and TFTP servers must be in the same network;
Make sure that the configuration files you want to download are in the correct directory on the TFTP server;
Download operation to ensure that the file's permissions are set correctly.
2. After successfully entering the system, it is still necessary to download the upgrade package from the TFTP server to the
switch system folder according to the routine process. And specify the upgrade package as the next load project for the
system to start. For more information, please refer to the S5850 and S8050 Series Switches FSOS Software Upgrade Guide.
3.5 Switch to FactoryReset
Switch# clear startup-config
Are you sure to delete startup configuration file? [yes/no]: yes
Switch# reboot
Building configuration...
Startup config file is not exist. Copy running config to Startup config? [yes/no]:no
Reboot system? [confirm]
Other manuals for S5800 Series
1
This manual suits for next models
13
Table of contents
Other FS Switch manuals
FS
FS SC9405 Series User manual
FS
FS S1900-8T User manual
FS
FS S5500-48T8SP Operating instructions
FS
FS PoE+ Series User manual
FS
FS S5850-48S8C User manual
FS
FS S5860 Series Operating manual
FS
FS N Series User manual
FS
FS S5850-24S2C-DC User manual
FS
FS PoE+ Series Operating instructions
FS
FS S3900 Series User manual
FS
FS S3700-24T4F Instruction Manual
FS
FS S3700-24T4F User manual
FS
FS S5850-24S2Q User manual
FS
FS NC8400 Series User manual
FS
FS MANAGED L2 User manual
FS
FS Fiberstore S8050-20Q4C User manual
FS
FS S3910 Series User manual
FS
FS PoE+ Series User manual
FS
FS S5500-48T8SP User manual
FS
FS S3410 Series User manual
