Froggit WH6000 PRO User manual
1
WH6000 PRO
WiFi Internet Wireless Weather
Station
Manual (EN)
Support/Updates/Manuals/Spare parts/compatible
products:
www.froggit.de
2
Table of contents
Overview 4
Displa Console 4
LCD displa 5
Thermo-h grometer indoor radio sensor 5
7-In-1 wireless outdoor sensor 6
Intelligent fan 7
Installation and set-up 7
Install 7-In-1 Wireless Sensor 7
Inserting batteries 8
Alignment of mounting post and direction 8
Install wireless indoor sensor 8
Placement of the wireless indoor sensor 9
Setting up the console 10
S nchronization of wireless 7-In-1 sensor &
Indoor sensor(s) 11
reate weather server account & set up WiFi connection 12
Setting up a WiFi connection 13
Setting up the weather server connection 14
Create a Wunderground account 17
Create WeatherCloud account 17
Live weather data 18
Firmware Update 18
Other console settings and functions
Manual setting of the clock 19
Moon phase 20
Sunrise and sunset time 20
Setting the alarm time 21
Activation of alarm and temperature pre-alarm function 21
Function Temperature / Humidit 22
3
Trend indicator 23
Wind 23
Dew point 24
Heat Index 24
Wind Chill 24
Weather Forecast 25
Barometric pressure 25
Rain 25
Light intensit , UV index & sunburn time 26
MAX/MIN data record 27
Historical data for the last 24 hours 27
Weather alarm setting 28
Backlighting 28
Maintenance 29
Troubleshooting 29
Specifications 31
General safety instructions 35
4
OVERVIEW
DISPLAY ONSOLE
1 Alarm/Snooze ke 9 Rain ke
2 LCD displa 10 Clock set ke 16 Index ke
3 Histor ke 11 Wall mounting holder 17 ˄ ke
4 MAX/MIN ke 12 Refresh ke 18 °C/°F ke
5 Channel ke 13 Sensor/WiFi ke 19 Reset ke
6 Baro ke 14 OFF/HI/LO slide 20 Alert ke
7 Wind ke switch 21 Batter door
8 Sun ke 15 Alarm ke 22 Table stand
23 Power jack
5
L D DISPLAY
Display section:
1 Outdoor temperature & humidit 7 Barometer
2 Wind direction & speed 8 Rainfall & Rain rate
3 Indoor (CH) temperture & humidit 9 Calendar
4 Weather index 10 Time / alarm
5 UV index & light intensit (Sun) 11 Moon phase &
6 Weather forecast Sunrise & Sunset time
THERMO-HYGRO INDOOR SENSOR
1 Transmission status LED 4 Reset ke
2 Wall mounting holder 5 Batter compartment
3 Channel slide switch
6
7-IN-1 OUTDOOR SENS
1Wind vane 8 Reset ke
2 Wind cups 9 Transmission LED
3 Antenna 10 Bubble level
4 Radiation shield 11Rain collector
5 Thermo-H gro sensor and Ventilating fan 12 UV/light sensor
6 Mounting parts 13 Solar panel
7 Batter door
7
SMART VENTILATING FAN
A fan is installed inside the radiation shields to reduce the effects of
solar heat.
The fan is driven b a solar panel and rotates automaticall under 2
conditions:
1. when the sun shines on the solar panel, and 2. the average wind
speed is less than 5 m/s for 1
minute.
INSTALLATION AND SETUP
Your console can be linked to a 7-in-1 wireless outdoor sensor and
up to 7 wireless indoor sensors.
(1 wireless indoor sensor is included)
INSTALL 7-IN-1 WIRELESS SENSOR
Your wireless 7-IN-1 sensor measures wind speed, wind direction,
precipitation, UV, light intensit , temperature and humidit for ou.
The sensor is alread calibrated and assembled.
8
INSERTING BATTERIES
Unscrew the batter cover on the bottom of the unit and insert the
batteries according to the +/- polarit indicated. Screw the batter
cover on tightl .
NOTE:
The red LED will start flashing ever 12 seconds.
ALIGNMENT OF MOUNTING POST AND DIRE TION
Install the 7-IN-1 wireless sensor in an open
Position without obstacles above and around the sensor for accurate
rain and wind measurements.
Install the sensor so that the smaller end is facing north to correctl
align the wind direction flag.
Attach the mounting stand and bracket (supplied) to correctl align
the wind vane.
INSTALL WIRELESS INDOOR SENSOR
Remove the batter compartment of the sensor.
9
Set the channel number for the sensor with the channel slide switch.
(e.g. channel 1)
Insert 2 x AA size batteries into the batter compartment and close
the batter cover according to the polarit indicated on the batter
compartment.
4. the sensor is in s nchronisation mode and will be automaticall
detected b the displa console within the next few minutes The
transmission status LED will start flashing ever 1 minute.
NOTE:
- If ou need to reassign the sensor channel, slide the channel slide
switch to the new channel.
position. To make the new channel number effective, press the [
RESET ] ke on the sensor.
- Avoid placing the sensors in direct sunlight, rain or snow.
- To prevent the sensor(s) and the console from not being able to be
connected to each other during the setup of the new console, please
turn
first select the sensor(s), and then press the [ RESET ] ke on the
main unit (not required for sensors).
PLA EMENT OF THE WIRELESS INDOOR SENSOR
Attach a screw to the wall where ou want to hang the sensor.
Use the wall bracket to hang the sensor on the screw. You can also
place the sensor on a table b itself.
10
SETTING UP THE ONSOLE
INSTALLING THE FUSE BATTERY
NOTE:
The emergenc batter can be used as a backup: Time & date,
Max/Min & weather records of the last 24 hours, Alarm
Setting values, offset value of weather data and sensor(s) channel
progression.
The built-in memor can save: Router setting and weather server
setting
SWITCH ON THE CONSOLE
Plug the supplied adapter into the power socket on the back of the
console.
Once the console is switched on, all segments of the LCD screen
are displa ed briefl .
The console will automaticall switch to Sensor S nc mode and AP
mode (see Setting up WI-FI connection).
NOTE:
If no displa appears on the LCD screen after the adapter is
inserted, press the [ RESET ] ke using a pointed object.
Table of contents
Other Froggit Weather Station manuals
Froggit
Froggit WH3000SE Installation manual
Froggit
Froggit WH2600 PRO User manual
Froggit
Froggit WH4000 User manual
Froggit
Froggit WH2800 User manual
Froggit
Froggit HP1000SE User manual
Froggit
Froggit WH5300SE Installation manual
Froggit
Froggit WH3000SE User manual
Froggit
Froggit WH3000 User manual
Froggit
Froggit DP2000 User manual
Froggit
Froggit WH3900 User manual
Popular Weather Station manuals by other brands
National Geographic
National Geographic VA Colour RC instruction manual
Renkforce
Renkforce 1208067 operating instructions
Levenhuk
Levenhuk Discovery Report WA40 quick start guide
Instant Transmission
Instant Transmission MA 10410 instruction manual
Lutron Electronics
Lutron Electronics PHB-318 Operation manual
WAREMA
WAREMA EWFS Weather station eco Operating and installation instructions