Frico ICSR Series User manual

ICSR

.... 6

SE ....38

.... 22

NO .... 30

.... 14

.... 54

ES .... 70

.... 62

.... 46

ICSR

209

238

ICSR

Type A

ICSR20 854

ICSR30 1070

ICSR

Type E-nr [SE] EL-nr [NO]

ICPP20 L: 2 m

ICPB

ICAP15 85 701 55 L: 1,5 m

ICAP20 85 701 56 L: 2 m

ICUB 85 701 57

ICAB 85 701 58

Accessories

ICPP20

ICAP

ICUB

ICPB

ICAB

ICSR

Wiring diagrams

ICSR

Relay

ICSR

Technical speciﬁcations | Carboninfra ICSR with directed heat distribution, remote, installation height 1,8 – 3,5 m 3

Type E-nr (SE) EL-nr (NO) Heat

output

[W]

Voltage

[V]

Amperage

[A]

Max. ﬁlament

temperature

[°C]

Weight

[kg]

ICSR20 85 701 59 2000 230V~ 8,7 1200 +/-100 6,2

ICSR30 85 701 60 3000 230V~ 13 1200 +/-100 7, 1

Protection class IC, horizontal position: (IP44), splash-proof design.

CE compliant.

ICSR

General Instructions

Read these instructions carefully before

installation and use. Keep this manual for

future reference.

The product may only be used as set out in

the assembly and operating instructions. The

guarantee is only valid if the product is used

in the manner intended and in accordance

with the instructions.

Application

Carboninfra IC provides a smooth and direct

heat that ﬁts well on terraces and balconies.

IC is also ideal for spot heating, both indoors

and in more protected areas outdoors. The

heat lamps in the IC have a very long service

life, the operating time is up to 10 000 h.

ICSR has a focused heat spread and is

intended for higher installation height. ICSR

can be controlled using a remote control or

the control panel on the heater.

All models can be installed vertically as well

as horizontally and have an integrated output

selector and thermostat.

Protection class, horizontal position: IP44

Assembly and operating instructions

ICSR

Control

Remote control

LED Red

Red

L2 Red

Yellow

Display Green

Battery (AAA) 1,5V x 2

Open lid

LED Description

Red L1 Standby

Red L2 Lower heating element ON

Red L3 Upper heating element ON

Red L2 + red L3 Both elements ON

Yellow L4 Timer active

Red L5 Temperature in °C

Green L6 Indication Automatic mode

Blinking Manual mode

Remote control Description

1 Decrease temperature and time

2 Increase temperature and time

3 Choose timer mode

4 Choose manual or automatic mode

5 On/off

ICSR

Constituent parts

ICSR

Bracket

Reﬂector

Spot angle

50°

Universal

holder

Double

IR-carbon-

element

Medium wave

Horizontal

or vertical

mounting

Ventilating

body

Radiant angle

30° – 0° – 30°

Front grid

metal

Connection

box

Start up

1. Connect the plug (standby mode).

The heater can be controlled using the remote

control or the control panel on the heater.

2. Push the O/I- to activate the heater.

The prevailing temperature is shown in the

display (room temperature).

To switch on the heater the elements must be

activated by the output selector or a setpoint

must be registered.

SET

Activate manual or automatic mode.

When LED L6 is lit the heater is in automatic

mode. To switch to manual mode, push SET

repeatedly until L6 starts to blink. To choose

the heating power, push SET repeatedly in

manual mode (upper element element ON,

lower element ON, both elements ON).

To choose automatic mode push the SET-

button when both elements are ON in manual

mode.

Automatic mode

When the heater is on and in automatic

mode, press the + or - to set the desired set

point.

When the room temperature (actual value)

is less than 1 °C below the set point both

elements are on. When the actual value is

1 °C below the set point one element switches

off, when the actual value is equal to the set

point both elements switch off.

When the actual value falls below 1 °C the set

point two elements switch on.

Example:

• Set point: 22 °C, Room temperature

(actual value): 15 °C => Both elements

ON.

• The room temperature increases to 21 °C

=> one element OFF.

• The room temperature increases to 22 °C

=> both elements OFF.

• The room temperature decreases to below

21 °C => both elements ON.

Temperature setting: +10 – +40 °C (+/- 1 °C).

Manual mode

In manual mode the electronic thermostat is

not used. Select manually if upper element,

lower element or both elements should be

switched on.

Timer

The timer allows the desired operating time

0-20 hours to be set.

1. Push TIMER.

2. Select desired time with + and –.

LED L4 is lit when the timer is active.

ICSR

Rip for

horizontal

position Rip for

vertical

position

Bracket

Rotating to horizontal or vertical position on wall or stand

Rotating from

horizontal to vertical

position, 90°.

Note: Only clockwise.

The heater must

be off and the plug

pulled from the

socket. When rotating

the heater, the metal

body should be

carefully touched by

hand.

Rotating from

vertical to horizontal

position, 90°.

Note: Only

anticlockwise.

ICSR

Screw DIN 7505 D 5 x 60

Plug D 8 PE 8 x 40

Screw DIN 7505 D 5 x 60

Plug max 250 mm D 8 PE 8 x 40

After assembly and after the

radiation angle is set, tighten

the screws.

After assembly and after the

radiation angle is set, tighten

the screws.

Mounting

Wall or ceiling mounting with the bracket

Wall or ceiling mounting with the bracket and aluminium proﬁle ICAP

Mounting of bracket on post ICPP with stand foot ICPB

Max

250 mm

74 mm

102 mm

ø8 mm

Note: Please observe minimum mounting distance

in the manual.

This manual suits for next models

Table of contents

Other Frico Heater manuals

Frico

Frico Thermozone ADA Series User manual

Frico

Frico Thermozone AG4515A User manual

Frico

Frico PAECS User manual

Frico

Frico Thermozone ADR 200 E User manual

Frico

Frico Tiger 2 kW User manual

Frico

Frico SWT Series User manual

Frico

Frico INFRAFRAME IP24 User manual

Frico

Frico Thermocassette CTS User manual

Frico

Frico PA3500 Series User manual

Frico

Frico Infratower IHA30BP User manual

Frico

Frico Thermozone AG 4000 A Series User manual

Frico

Frico Thermozone AC 500 User manual

Frico

Frico Gliese GSE065 User manual

Frico

Frico Thermozone ADR300W Series User manual

Frico

Frico PA2510E05 User manual

$Frico Infracalm INC05E User manual$

Frico

Frico Infracalm INC05E User manual

Frico

Frico Thermozone SF WL Series User manual

Frico

Frico AGS5500 User manual

Frico

Frico Thermoplus EC Series User manual

Frico

Frico IRCF Series User manual

Frico

Frico PAEC3200C Series User manual

Frico

Frico Panther T Series User manual

Frico

Frico Thermowarm TWT User manual

Frico

Frico SH17521 User manual

Popular Heater manuals by other brands

oventrop

oventrop Regucor Series quick start guide

Blaze King

Blaze King CLARITY CL2118.IPI.1 Operation & installation manual

ELMEKO

ELMEKO ML 150 Installation and operating manual

BN Thermic

BN Thermic 830T instructions

KING

KING K Series Installation, operation & maintenance instructions

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Installation instructions and owner's manual

Well Straler

Well Straler RC-16B user guide

EUROM

EUROM 333299 instruction manual

Heylo

Heylo K 170 operating instructions

Eterna

Eterna TR70W installation instructions

Clarke

Clarke GRH15 Operation & maintenance instructions

IRSAP

IRSAP The Radiator Company Ovali Fitting instructions

Empire Heating Systems

Empire Heating Systems WCC65 Installation and owner's instructions

Wetekom

Wetekom 92 86 43 Original instructions

Desa

Desa SPC170-F owner's manual

Watlow

Watlow Watrod Electric Tubular Heaters Specifications

Haverland

Haverland ECO-DRY GPS Series Instruction & installation manual

Stelpro

Stelpro ASILVC2060 Series user guide