Franke FTC 522 Operation manual

Instructions for use and installation

Cooker Hood

Istruzioni per l’uso e l’installazione

Cappa

Mode d’emploi et installation

Hotte de Cuisine

Bedienungsanleitung und Installation

Dunstabzugshaube

FTC 522

FTC 622

FTC 922

INDEX

RECOMMENDATIONS AND SUGGESTIONS..................................................................................................................... 3

CHARACTERISTICS.............................................................................................................................................................6

INSTALLATION...................................................................................................................................................................... 7

USE........................................................................................................................................................................................ 9

MAINTENANCE...................................................................................................................................................................10

INDICE

CONSIGLI E SUGGERIMENTI............................................................................................................................................11

CARATTERISTICHE............................................................................................................................................................ 14

INSTALLAZIONE.................................................................................................................................................................15

USO......................................................................................................................................................................................17

MANUTENZIONE ................................................................................................................................................................ 18

SOMMAIRE

CONSEILS ET SUGGESTIONS.......................................................................................................................................... 19

CARACTERISTIQUES......................................................................................................................................................... 22

INSTALLATION....................................................................................................................................................................23

UTILISATION....................................................................................................................................................................... 25

ENTRETIEN......................................................................................................................................................................... 26

INHALTSVERZEICHNIS

EMPFEHLUNGEN UND HINWEISE................................................................................................................................... 27

CHARAKTERISTIKEN......................................................................................................................................................... 30

MONTAGE........................................................................................................................................................................... 31

BEDIENUNG........................................................................................................................................................................ 33

WARTUNG........................................................................................................................................................................... 34

EN 3

RECOMMENDATIONS AND SUGGESTIONS

The Instructions for Use apply to several versions of this appliance.

Accordingly, you may find descriptions of individual features that do not

apply to your specific appliance.

INSTALLATION

•The manufacturer will not be held liable for any damages resulting from

incorrect or improper installation.

• The minimum safety distance between the cooker top

and the extractor hood is 650 mm (some models can

be installed at a lower height, please refer to the

paragraphs on working dimensions and installation).

• Check that the mains voltage corresponds to that

indicated on the rating plate fixed to the inside of the

hood.

• For Class I appliances, check that the domestic

power supply guarantees adequate earthing.

Connect the extractor to the exhaust flue through a pipe of minimum

diameter 120 mm. The route of the flue must be as short as possible.

• Do not connect the extractor hood to exhaust ducts carrying combustion

fumes (boilers, fireplaces, etc.).

• If the extractor is used in conjunction with non-

electrical appliances (e.g. gas burning

appliances), a sufficient degree of aeration must

be guaranteed in the room in order to prevent the

backflow of exhaust gas. The kitchen must have

an opening communicating directly with the open

air in order to guarantee the entry of clean air.

When the cooker hood is used in conjunction with

appliances supplied with energy other than electric, the negative pressure in

the room must not exceed 0,04 mbar to prevent fumes being drawn back

into the room by the cooker hood.

• In the event of damage to the power cable, it must be replaced by the

manufacturer or by the technical service department, in order to prevent any

risks.

2°

EN 4

• If the instructions for installation for the gas hob specify a greater distance

specified above, this has to be taken into account. Regulations concerning

the discharge of air have to be fulfilled.

• Use only screws and small parts in support of the hood.

Warning: Failure to install the screws or fixing device in accordance with

these instructions may result in electrical hazards.

• Connect the hood to the mains through a two-pole switch having a contact

gap of at least 3 mm.

USE

• The extractor hood has been designed exclusively for domestic use to

eliminate kitchen smells.

• Never use the hood for purposes other than for which it has been designed.

• Never leave high naked flames under the hood when it is in operation.

• Adjust the flame intensity to direct it onto the bottom of the pan only, making

sure that it does not engulf the sides.

• Deep fat fryers must be continuously monitored

during use: overheated oil can burst into flames.

• Do not flambè under the range hood; risk of fire.

• This appliance can be used by children aged from

8 years and above and persons with reduced

physical, sensory or mental capabilities or lack of

experience and knowledge if they have been given supervision or instruction

concerning use of the appliance in a safe way and understand the hazards

involved. Children shall not play with the appliance. Cleaning and user

maintenance shall not be made by children without supervision.

EN 5

• “CAUTION: Accessible parts may become hot when used with cooking

appliances.”

MAINTENANCE

•Switch off or unplug the appliance from the mains supply before carrying out

any maintenance work.

• Clean and/or replace the Filters after the specified time period (Fire hazard).

• The Grease filters must be cleaned every 2 months of operation, or more

frequently for particularly heavy usage, and can be washed in a dishwasher.

• The Activated charcoal filter is not washable and cannot be regenerated,

and must be replaced approximately every 4 months of operation, or more

frequently for particularly heavy usage.

• "Failure to carry out cleaning as indicated will result in a fire hazard".

• Clean the hood using a damp cloth and a neutral liquid detergent.

The symbol on the product or on its packaging indicates that this product

may not be treated as household waste. Instead it shall be handed over to the

applicable collection point for the recycling of electrical and electronic

equipment. By ensuring this product is disposed of correctly, you will help

prevent potential negative consequences for the environment and human

health, which could otherwise be caused by inappropriate waste handling of

this product. For more detailed information about recycling of this product,

please contact your local city office, your household waste disposal service or

the shop where you purchased the product.

EN 6

CHARACTERISTICS

Dimensions

Components

Ref. Q.ty Product Components

11 Hood Body, complete with: Controls, Light,

Blower, Filters

81 Directional Air Outlet grille

91 Flange ø 150 mm

10a 1 Flange ø 120 mm

10b 1 Adapting ring ø 120-125 mm

20 1 Closing element

Ref. Q.ty Installation Components

7.1 2 Hood Body Fixing Brackets

12a 8 Screws 3,5 x 16

12e 2 Screws 2,9 x 12,7

12f 5 Screws 2,9 x 9,5

Q.ty Documentation

1 Instruction Manual

12e

12a

12f

10a

10b

12a

7.1

12a

7.1

EN 7

12a

10a

10b

INSTALLATION

Drilling the Support surface and Fitting the Hood

• The Hood can be installed directly on the

underside of wall-mounted units (650 mm

min. from the Cooker Top) using the snap-

on side supports.

• According to requirements, fit two of the

support brackets for the hood (see table fig.

1) at a distance of 125 mm from the front of

the wall-mounted unit.

• According to the chosen air outlet diameter,

insert the appropriate flange into the upper

exhaust outlet. (fig.2)

• Measure the depth of the wall-mounted unit.

(fig.3)

• Measure the depth of the hood plus the fas-

tening profile depth 20. (fig. 3)

• Adjust the depth of profile 20 accordingly,

cutting it to size.

• Screw the fastening profile 20 to the rear

part of the hood using screws 12f

(2.9 x 9.5) provided. (fig.4)

• Open the ducting carriage.

• Remove the metal grease filters one at a

time, releasing the fasteners provided.

• Close the ducting carriage.

• Insert the Hood until it connects with the

snap-on side Supports. (fig.5)

• Open the ducting carriage.

• Lock it in position by tightening screws Vf

from underneath the Hood. (fig.5)

• Should it be necessary to make adjustments

to the inside of the filter holder element,

proceed as follows:

• Loosen the four adjustment screws Vr

and close the carriage again. (fig.6)

• Move the whole filter holder element un-

til it is properly aligned with the wall-

mounted unit. (fig.7)

• Holding the hood canopy still, extract the

carriage and tighten the adjustment

screws Vr. (fig.6)

• It is now possible to fasten the hood to the

wall-mounted unit using the screws 12a

(3.5 x 16) provided. (fig.8)

• Replace the metal grease filters.

• Close the ducting carriage.

Nische / Niche /

Nicchia/ Niche Haltewinkel /

Cornières /

Staffe / Bra-

ckets X

SMS 550 mm 25 mm

518-512 mm 9 mm

EN 8

Connections

DUCTING VERSION AIR EXHAUST SYSTEM

When installing the hood in ducting version, a rigid or a

flexible pipe with the diameter corresponding to the

flange diameter is used in order to connect the hood to

the air outlet piping.

• Fix the pipe with an adequate quantity of pipe

clamps (not supplied).

• Remove possible charcoal filters.

RECIRCULATION VERSION AIR OUTLET

• Cut a hole ø 125 mm in any shelf that may be posi-

tioned over the hood.

• Insert the flange 10a on the hood body outlet.

• Connect the flange to the outlet on the shelf over the

hood using a flexible or rigid pipe ø120 mm.

• Fix the pipe in position using sufficient pipe clamps

(not supplied).

• Fix the directional grille 8on the recirculation air

outlet using the 2 screws 12e (2,9 x 12,7) provided.

• Ensure that the activated charcoal filters have been

inserted.

12e

ELECTRICAL CONNECTION

• Connect the hood to the mains through a two-pole switch having a contact gap of at least 3

mm..

EN 9

USE

By pulling out the sliding panel it is possible to automatically activate all the hood functions.

By simply closing the sliding panel all the functions are switched off.

SWITCH FUNCTIONS

LLight Switches the lighting system on and off

MMotor Switches the extractor motor on and off

1. Low speed, used for a continuous and silent air change in the presence

of light cooking vapour.

2. Medium speed, suitable for most operating conditions, thanks to an op-

timum relation between hood performance and noise.

3. Maximum speed, suitable when the highest cooking vapour emission

has to be eliminated for longer periods.

EN 1

MAINTENANCEGrease filters

CLEANING METAL CASSETTE GREASE FILTERS

• The filters must be cleaned every 2 months, or more frequently

in case of particularly heavy use of the hood. Filters can be

washed in a dishwasher.

• Pull out the sliding suction panel.

• Remove the filters one by one, after having disconnected the

relative fastening elements.

• Wash the filters, taking care not to bend them. Let them get dry

before refitting them. (The colour of the filter surface may

change throughout the time but this has no influence to the fil-

ter efficiency).

• When refitting the filters, make sure that the handle is visible

on the outside.

• Close the sliding suction panel.

Charcoal filter (Recycling version)

REPLACING CHARCOAL FILTERS

Warning: Turn the lights off and wait until the lamps cool down

before you change the odour filter.

• These filters are not washable and cannot be regenerated, and

must be replaced approximately every four months or more

frequently by particularly heavy use.

• Pull out the sliding suction panel.

• Remove the grease filters.

• Remove the saturated carbon filter by releasing the fixing

hooks

• Fit the new filter by hooking it into its seating.

• Replace the grease filters.

• Close the sliding suction panel.

Lighting unit

Warning: This appliance is fitted with a white LED lamp classed

as 1M according to EN 60825-1: 1994 + A1:2002 + A2:2001

standards; maximum optical power emitted @439nm: 7µW. Do

not look directly at the light through optical devices (binoculars,

magnifying glasses…).

• For replacement contact technical support ("To purchase con-

tact technical support").

This manual suits for next models

Table of contents

Languages:

Other Franke Ventilation Hood manuals

Franke

Franke FTU PLUS 3707 I BK User manual

Franke

Franke FBI 537 XS User manual

Franke

Franke FMA 2.0 PRO 807 BK User manual

Franke

Franke FGC 925 I XS NP User manual

Franke

Franke FGC 925 I XS NP User manual

Franke

Franke Retro 710 FDR 906 BK/XS User manual

Franke

Franke FSMD 508 User manual

Franke

Franke FNE 915 XS ECS Operation manual

Franke

Franke FBI 362 XS RB User manual

Franke

Franke FSMD 508 User manual

Franke

Franke FRO 908 BK/XS Operation manual

Franke

Franke Cooker Hood Operation manual

Franke

Franke CONCERTO FCO 520 User manual

Franke

Franke Imagine FIM/2 900 W XS Operation manual

Franke

Franke FSMA 605 User manual

Franke

Franke 1292B-10 User manual

Franke

Franke FCR 925 TC User manual

Franke

Franke FNE 605 Operation manual

Franke

Franke Opal 762-17 User manual

Franke

Franke FLI 625 XS Operation manual

Franke

Franke FTU 3807 I XS 77H Operation manual

Franke

Franke FRO 908 BK/XS-CH Operation manual

Franke

Franke FTC 542 XS CH Operation manual

Franke

Franke FMY 606 User manual

Popular Ventilation Hood manuals by other brands

emmeti

emmeti RECUPA MED A-140 Installation and use manual

Nibe

Nibe F135 user manual

Kuppersberg

Kuppersberg INTRO 60 Technical Passport

Zephyr

Zephyr Spruce AK9834BS Use, care and installation guide

Hisense

Hisense MH6INBG manual

Miele

Miele DA 1255 Operating and installation instructions

Broan

Broan 46000 Specification sheet

GE Profile PV977 Owner's Manual & Installation Instructions

FALMEC

FALMEC FFRIA24W5FS Instruction booklet

Whirlpool

Whirlpool RH2600XL-1 SERIES installation instructions

Küppersbusch

Küppersbusch DX ISLA instruction manual

ETNA

ETNA AV360RVS Instructions for use

JUNO

JUNO JDF603E6 installation manual

Miele

Miele DA 6708 D Operating and installation instructions

Tricity Bendix

Tricity Bendix LE 150 Installation & operating instructions

AEG

AEG X68163BV1 user manual

AEG

AEG 125 D operating instructions

Smeg

Smeg KSEV97X instruction manual