Franke 2152 00 23 User manual

Installation and operating instructions Istruzioni per il montaggio e l’uso

Notice de montage et de mise en service Montage- en bedrijfsinstructies

Instrucciones de montaje y uso

18-05.098d-Exp.fm/07.04.04

Franke Aquarotter AG, Germany

EA-Nr.: 76 12982 000485

FAR-Best.-Nr.: 2152 00 23

EA-Nr.: 76 12982 000492

FAR-Best.-Nr.: 2154 00 23

Inhaltsverzeichnis.fm

................................................................. 3

Please refer to the graphics in the German Instal-

lation and Operating Instructions.

................................................................. 10

Les graphiques sont disponibles dans la notice

de montage et de mise en service allemande.

................................................................. 17

Por favor, consulte los gráficos en las instruc-

ciones alemanas de montaje y uso.

................................................................. 24

Per le grafiche fare riferimento alle Istruzioni per il

montaggio e l’uso in tedesco.

................................................................. 31

De tekeningen kunt u in de Duitse montage- en

bedrijfsinstructies vinden.

18-05.098d-GB.fm

0English

76 12982 000485 ........AQUAMIX single-lever mixer for wall mounting

with angled outlet

76 12982 000492 ........AQUAMIX single-lever mixer for wall mounting

with swivel outlet

Please refer to the graphics in the German Installation and Operating Instructions.

0Contents

1. Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2. Abbreviations and terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

3. Important notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

4. Technical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

5. Scope of Delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

6. Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

7. Installation example. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

8. Assembly Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

9. Function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

10. Adjusting flow duration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

11. Adjusting the temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

12. Replacing the functional part. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

13. Swivel limit (model with a swivel outlet). . . . . . . . . . . . . . . . . . . . . . . 6

14. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

15. Fault correction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

16. Replacement parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

1. Warranty

Liability is accepted according to the general terms of agreement and supply.

Only use original replacement parts!

18-05.098d-GB.fm

2. Abbreviations and terminology

3. Important notes

• Installation, commissioning and maintenance are to be performed only by a qualified

technician according to the instructions provided.

• Legal requirements and the technical connection regulations of the local water supply

companies must be complied with.

• Before assembling and installing the equipment, flush the supply pipes in accordance

with DIN 1988!

• Only operate this valve in conjunction with the correct grit filters.

• If the temperature of the hot water supply is above 45 °C, the temperature limiter

must be set to prevent scalding (see Chapter 11.).

• Use suitable cleaning agents that are not harmful to the fittings in a proper manner

and rinse with water after use. High-pressure cleaners must not be used for cleaning.

4. Technical specifications

TWW Warm drinking-water

TW Drinking-water

SW Width A/F

DN Nominal diameter in mm

FAR Order No. Franke-AQUAROTTER Order No.

EA No. European article number

Conversion 1 mm = 0.03937 inches

1inch=25.4mm

All length specifications in the graphics are in mm.

Minimum flow pressure 1.0 bar

Calculation flow rate TW 0.07 l/s (4.2 l/min), TWW 0.07 l/s (4.2 l/min)

Volume flow 2152 00 23 0.10 l/s (6 l/min) at 3 bar flow pressure

Volume flow 2154 00 23 0.13 l/s (7.8 l/min) at 3 bar flow pressure

Flow time at 38 °C 1 – 30 s adjustable

18-05.098d-GB.fm

5. Scope of Delivery

6. Dimensions

7. Installation example

8. Assembly Instructions

8.1

Flush the pipes in compliance with DIN 1988.

8.2

Install the offset-type screw connector.

8.3

Install the screw rosettes.

8.4

Install the fitting.

!Caution!!

Do not forget the mesh washer.

9. Function

9.1

Open both water flow volume regulators (a) SW 3.

9.2

Actuate the push-cap handle to start the flow of water.

☞Water flow stops automatically, depending on the flow duration that has been set.

9.3

Turn the push-cap handle to select the desired temperature.

10. Adjusting flow duration

10.1

Use a screwdriver to carefully prise up the plug.

10.2

Remove the plug.

10.3

Use an Allan key (SW 2.5) to loosen the set screw.

10.4

Remove the push-cap handle.

10.5

Use a screwdriver to adjust the flow time.

a: Blade width 3 mm

+longerflowtime(max.50s)

Quantity Description

2 Offset-type screw connector, with mesh washers

and screw rosette

1 AQUAMIX self-closing single-lever mixer

1 Installation and operating instructions

18-05.098d-GB.fm

– shorter flow time (min. 1 s)

10.6

To measure the flow time, trigger water flow from the fitting by pressing the handle jack.

10.7

After setting the required flow time, replace the push-cap handle.

☞Important!!

When refitting the push-cap handle, ensure that the attachment rib locks in the

appropriate groove.

11. Adjusting the temperature

11.1

Remove the push-cap handle (see Chapter 10.).

11.2

Use a screwdriver to carefully prise off the stop ring and then use your hand to pull it off

from the teeth.

11.3

Mount the push-cap handle and trigger the fitting.

11.4

Turn the push-cap handle until the desired maximum hot-water temperature is reached.

11.5

Push the stop ring back on the teeth so that the nose of the stop ring is positioned up

against the right-hand stop of the housing.

11.6

Reassemble in the reverse order.

☞Important!!

While fitting the push-cap handle, make sure that the driving lug locks properly into the

corresponding groove.

12. Replacing the functional part

12.1

Close both water flow volume regulators (see Chapter 14.1).

12.2

Drain the fitting (see Chapter 14.2).

12.3

Remove the push-cap handle (see Chapter 10.).

12.4

Pull off the circlip.

12.5

Remove the circlip, the handle jack and the pressure spring.

12.6

Use a socket spanner to remove the functional part.

12.7

Reassemble in the reverse order.

☞Important!!

When refitting the push-cap handle, ensure that the attachment rib locks in the

appropriate groove.

13. Swivel limit (model with a swivel outlet)

Depending on the position in which the stop ring is fitted (see diagram), the swivel arm

can be either fixed in a rigid position or it can be moved within a swivel range of 150°.

If the stop ring is removed, the swivel arm could theoretically be rotated through 360°.

18-05.098d-GB.fm

14. Maintenance

Cleaning or replacing if necessary

14.1

Close both water flow volume regulators (a) SW 3.

14.2

Drain the fitting.

14.3

Use an SW 22 open-end spanner to unscrew and remove the aerator.

14.4

Clean the aerator or replace it if necessary.

Replacing the return-flow inhibitor

14.5

Close both water flow volume regulators (see Chapter 14.1).

14.6

Drain the fitting (see Chapter 14.2).

14.7

Remove the union nuts.

14.8

Pull off the fitting.

14.9

Use an SW 12 Allan key to unscrew the seating completely.

14.10

Remove the defective return-flow inhibitor and replace it with a new one.

14.11

Reassemble in the reverse order.

☞Important!!

Make absolutely sure to install the return-flow inhibitor pointing in the right direction.

Replacing the mesh washers

14.12

Close both water flow volume regulators (see Chapter 14.1).

14.13

Drain the fitting (see Chapter 14.2).

14.14

Remove the union nuts.

14.15

Pull off the fitting.

14.16

Replace the mesh washers (b).

18-05.098d-GB.fm

15. Fault correction

If you are unable to correct a fault or if the fault is not described in the fault correction

section, please inform our service department!!

Fault Cause Remedy

Water does not flow – Water flow regulator closed ➯Restore

–Functionalpartfaulty ➯Replace it

Water flows

continuously

–Functionalpartfaulty ➯Replace it

– Valve seat dirty ➯Clean it

Water flow too weak – Aerator calcified ➯Clean it

– Supply pressure too low ➯Check it

– Grit filter/return-flow inhibitor is

contaminated

➯Clean it

– Water flow volume regulator not fully

opened

➯Open it

Flow time too short or

too long

– Incorrect setting ➯Adjust it

– Mesh washer contaminated ➯Clean it

– Aerator calcified ➯Clean it

– Functional part defective ➯Replace it

Water is too hot – Temperature limit is incorrectly set or

not set at all

➯Adjust it

– Cold water is turned off ➯Open it

– Return flow inhibitor in the cold

water connection is faulty

➯Replace it

Water is too cold – Return flow inhibitor in the cold

water connection is faulty

➯Replace it

– Hot water is turned off ➯Open it

18-05.098d-GB.fm

16. Replacement parts

Designation Order No.

1 Push-cap handle . . . . . . . . . . . . . . . . 82-100-20.021

2 Functional part . . . . . . . . . . . . . . . . . . 82-100-20.390

3 Stop ring . . . . . . . . . . . . . . . . . . . . . . 82-039-05.134

4 Aerator (PU 10 pcs.) . . . . . . . . . . . . . 81-013-03.057

5 Swivel outlet, only for 2154 00 23

115 mm projection . . . . . . . . . . . 90-1017 23

075 mm projection . . . . . . . . . . . 90-1016 23

175 mm projection . . . . . . . . . . . 90-1018 23

6 Installation kit comprising:

Mesh washers

Return-flow inhibitors

Rubber parts

Seal . . . . . . . . . . . . . . . . . . . . . . . 81-500-02.001

Replacement kit comprising:

Rubber parts

Spring

Circlip

Sealing plug

Set screw . . . . . . . . . . . . . . . . . . . 82-500-01.011

Designation Order No.

Theft-proof aerator

with flow controller 6l/min . . . . .81-013-03.058

Special spanner for

theft-proof aerator . . . . . . . . . . . . 90-1002 03

18-05.098d-F.fm

0Français

76 12982 000485 ........AQUAMIX - Mitigeur monocommande comme

batterie murale avec bec oblique

76 12982 000492 ........AQUAMIX - Mitigeur monocommande comme

batterie murale avec bec orientable

Les graphiques sont disponibles dans la notice de montage et de mise en service

allemande.

0Table des matières

1. Garantie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

2. Abréviations et unités . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

3. Remarques importantes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

4. Données techniques. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

5. Volume de livraison . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

6. Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

7. Exemple d’installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

8. Montage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

9. Fonctionnement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

10. Réglage de la durée d’écoulement . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

11. Réglage de la limitation de température. . . . . . . . . . . . . . . . . . . . . . . 13

12. Remplacement de l’élément fonctionnel . . . . . . . . . . . . . . . . . . . . . . 13

13. Limitation de butée (seulement pour les modèles avec bec orientable) 14

14. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

15. Elimination des pannes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

16. Pièces de rechange. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

1. Garantie

La responsabilité est conforme à celle décrite dans les conditions générales et de

livraison.

Utiliser exclusivement des pièces de rechange d’origine AQUA !

This manual suits for next models

Table of contents

Languages:

Other Franke Bathroom Fixture manuals

Franke

Franke STRATOS STRX611E User manual

Franke

Franke STRATOS STRX672 User manual

Franke

Franke F5L-Mix 2030039446 User manual

Franke

Franke FRESNO FSG 611-88 User manual

Franke

Franke ZEXOS611 User manual

Franke

Franke MUENCHEN SHMU0011 User manual

Franke

Franke AQCT0050 User manual

Franke

Franke RODAN RODX604 User manual

Franke

Franke AQUALINE-THERM SWV AQLT0036 User manual

Franke

Franke CMPX502N User manual

Franke

Franke ACXX2007 User manual

Franke

Franke 7612210067174 User manual

Franke

Franke KWC F5ST2003 2030036209 User manual

Franke

Franke AQUATIMER A3000 User manual

Franke

Franke F3EV1006 2030039462 User manual

Franke

Franke EXOS611X User manual

Franke

Franke ACXX2021 User manual

Franke

Franke AQRE133 User manual

Franke

Franke SANW200 User manual

Franke

Franke FAID0006 User manual

Franke

Franke MIRANIT F5LM2025 User manual

Franke

Franke F5ST2023 User manual

Franke

Franke ACLM2001 User manual

Franke

Franke MIRANIT F5ST2025 User manual

Popular Bathroom Fixture manuals by other brands

DURAVIT

DURAVIT C.1 C15240 0090 Instructions for mounting and use

Heatstore

Heatstore HSTRL500WTN Installation and operating instructions

Sunshower

Sunshower PURE SOLO manual

Delabie

Delabie Delabie Sporting 714700 manual

Kohler

Kohler K-13056 Homeowner's guide

ESS

ESS Container TCL-11 installation manual

Mustee

Mustee 22C installation instructions

VITRA

VITRA V-Flow manual

baliv

baliv DUK-80.30 T manual

Malmet

Malmet B105BT Operation, maintenance and installation manual

bathstore

bathstore Transition H1690MM Installation, Care & Adjustment Instructions

BELLOSTA

BELLOSTA Edward 0800/M Installation instruction

baliv

baliv DU-5160 manual

Gessi

Gessi RILIEVO 59011 manual

noken

noken VITAE 100188525-N299998810 manual

Allen + Roth

Allen + Roth 1142VA-30-201 manual

Britex

Britex HBDA installation guide

GRE

GRE DSALC32W instruction manual