Foxwell NT200E User manual
NT200E OBDII/EOBD Code Reader User’s Guide_English Version_V1.0
1
Table of Contents
1. Safety Information....................................................................................................................3
1.1 Important Safety Instructions................................................................... 3
2. Introduction............................................................................................................................... 4
2.1 About the Code Reader.............................................................................4
3. OBDII/EOBD Diagnosis........................................................................................................ 14
3.1 Reading DTCs...........................................................................................17
3.2 Clearing DTCs...........................................................................................20
NT200E OBDII/EOBD Code Reader User’s Guide_English Version_V1.0
2
3.3 Viewing Datastream.................................................................................23
3.4 Viewing Freeze Data............................................................................... 25
3.5 Reading I/M Readiness Status Data....................................................28
3.6 Reading Vehicle Information..................................................................34
3.7 Exiting Test.................................................................................................38
4. Updating the Code Reader...................................................................................................39
5. Troubleshooting..................................................................................................................... 46
NT200E OBDII/EOBD Code Reader User’s Guide_English Version_V1.0
3
1. Safety Information
For your safety, and to prevent damage to the equipment and vehicles, read this manual
thoroughly before operating your NT200E code reader. The safety messages presented
below and throughout this user manual are reminders to the operator to exercise extreme
care when using this device. Always refer to and follow safety messages and test
procedures provided by the manufacturer of the vehicle or equipment being tested. Read,
understand and follow all safety messages and instructions in this manual.
1.1 Important Safety Instructions
Always use this code reader as described in the user manual, and follow all safety
messages.
Do not route the test cable in a manner that would interfere with driving controls.
Do not exceed voltage limits between inputs specified in this user manual.
NT200E OBDII/EOBD Code Reader User’s Guide_English Version_V1.0
4
Always wear ANSI approved goggles to protect your eyes from propelled objects
as well as hot or caustic liquids.
Keep a dry chemical fire extinguisher suitable for gasoline, chemical and electrical
fires in work area.
Make sure to turn off ignition before connecting or disconnecting the code reader.
2. Introduction
The NT200E has been developed by leading industry experts. It is specially designed to
read/clear codes, read live data, retrieve freeze data and request vehicle information on
OBDII/EOBD compliant cars, SUVs, light-duty trucks and mini-vans sold worldwide since
1996.
2.1 About the Code Reader
2.1.1Code Reader Controls
NT200E OBDII/EOBD Code Reader User’s Guide_English Version_V1.0
5
NT200E OBDII/EOBD Code Reader User’s Guide_English Version_V1.0
6
A. OBD II Cable - provides communication for vehicle DLC.
B. LCD Display - shows menus, test results and operation tips.
C. UP Key - moves selection up.
D. ESC Key - returns to previous screen or level.
E. ENTER Key - confirms an action or enter system setup menu from home screen
F. DOWN Key - moves selection down
G. USB Port – provides a USB connection for the PC or laptop.
2.1.2Specifications
1.Display:Backlit, 128 x 64 pixel display with contrast adjustment.
2.Working Temperature: 0 to 60℃(32 to 140℉)
3.Storage Temperature: -20 to 70℃(-4 to 158℉)
4.Power: 8-18 Volts powered by vehicle battery
5.Dimensions(L*W*H): 120*75*20mm (4.7*2.96*0.78in)
6.Weight: 300g
NT200E OBDII/EOBD Code Reader User’s Guide_English Version_V1.0
7
2.1.3 Display Indicators
Below is a list indicators used to help navigate through menus.
1 $ Indicates the control unit number.
2 Indicates more than one screen of information is available.
2.1.4 System Setup
System Setup allows you to:
● Select menu languages.
● Change measurement unit.
● Adjust display contrast.
√System Setup settings remain until changes to the existing setups are made.
NT200E OBDII/EOBD Code Reader User’s Guide_English Version_V1.0
8
To do system setup:
1. Press the UP/DOWN key to enter System Setup from home screen.
√Follow on-screen instructions to program the code reader to meet your specific
needs.
2.1.5 Changing Language
√The code reader is set to display English menus by default.
System Setup
Language
Measurement Unit
Contrast
NT200E OBDII/EOBD Code Reader User’s Guide_English Version_V1.0
9
To change menu language:
1. Use the UP/DOWN key to pick Language from System Setup screen.
2. Press the ENTER key to confirm.
3. Use the UP/DOWN key to select desired language
System Setup
Language
Measurement Unit
Contrast
NT200E OBDII/EOBD Code Reader User’s Guide_English Version_V1.0
10
4. Press the ENTER key to save language setting and return.
2.1.6 Changing Measurement Unit
√Metric is the default measurement unit.
To change measurement unit:
1. Use the UP/DOWN key to select Measurement Unit from System Setup
screen.
2. Press the ENTER key to confirm.
Language
English
Espanol
Francais
Other manuals for NT200E
1
Table of contents
Other Foxwell Barcode Reader manuals
