Foxgear
LLC,
2
East
Section
Baigang,
Lishui,
Nanhai
district,
Foshan
City
,
Guangdong,
China,
[email protected] - www.foxgeardistribution.comPower In 30VDC - 4A (positive TIP)
Power out 100W RMS @4Ohm max 3%THD
XLR out Impedance <20K Ohm
Speaker Output Impedance 4/8/16 Ohm
S/N ratio <90db
Larghezza (Width) 120mm. (4,7”)
Lunghezza (Length) 85mm. (3,3”)
Altezza (Height) 30mm. (1,1”)
Peso (Weight) 0,5Kg. (1p)
FOXGEAR product warranty covers 5 years from date of purchase The warranty does not cover damage caused by accident, misuse and / or neglect, failure to comply with the instruction manual, repair and attempted repair by personnel not
authorized by FOXGEAR LLC, any damage caused during transport and delivery, (claims must be presented to the carrier); damage to any product that has been altered or on which it has been removed, defaced or altered serial number;
damage caused by faulty connections or connections to equipment failures and/or defective power cables. Responsibility of FOXGEAR LLC for any defective product is limited to repair or replacement of the product at our discretion. The
FOXGEAR LLC not be liable for damages resulting from loss of use of the product, lost time operation interrupted by non-use of the product, loss of business or any other damages or incidental, consequential or otherwise; damage in transit or
damage caused by inadequate packaging or of poor quality. Assistance: Please contact us for information on how, where and when to ship the product after the return has been Authorized by FOXGEAR LLC . The repaired goods should be
packed carefully and we recommend not include any accessories such as cables, effects, manuals, etc. .. Please attach a copy of the original receipt of purchase (invoice or receipt) together with a problem description and your personal details.
THE WARRANTY IS NOT VALID 'WITHOUT A COPY OF YOUR RECEIPT OF SALE CERTIFYING THAT THE DATE OF PURCHASE. Foxgear pedals are designed in Italy and proudly handmade in our own factory in PRC.
PLEASE NOTE: no serviceable parts inside, do not open. Carefully read
indications on yellow card inside the box, and yellow label on the PSU’s
cable. ALWAYS connect the Amplifier first and then plug the main to
wall socket. DO NOT connect the speaker out to any grounded
devices.
The VARICAB control is an Analog Variable Cabinet Simulator that let you find
the right sweet spot when going direct to mixer console, audio interface, or
wherever you want to hear your guitar/pedalboard, sounds like it sounds with
your guitar cabinet. It’s not just an EQ control, it works on the Feedback of the
preamp, so: Adjust the preamp amount, and just rotate the VARICAB control to
change the tone, then enjoy the separate XLR Volume Level - MASTER Level
TIPS:
The image of a small combo on right and a full 4x12” on left, doesn’t mean just
Bright-Dark.. but express the complexity of harmonic content, and richness of
sound that is typical of different amps. Always check both sides to hear what it
changes, cause the Varicab is also meant to better fit different input impedance
of different kind of devices. The Varicab effect is strictly dependant by the
preamp volume, and our suggestion is to connect it to a line input, instead of a
pre-mic input on your Audio interface, to not sum 2 preamps.
