Fosmon HD8192 User manual
Thank you for purchasing this Fosmon product. For optimum performance and safety, please read this user manual
carefully before operating and keep it for future reference.
Fosmon’s 5x1 HDMI Switch allows you to switch between 5 HDMI inputs and display to 1 output.
Product Diagram
Disclaimer Statement
We are not liable for any damage or destruction to personal properties that are contained inside or outside of the Fosmon
product.
Installation and Safety Precautions
• Cables must be placed well, where it would not be stepped on or pinched. Make sure cables are fully inserted into ports.
• To provide sucient ventilation during use, make sure there is at least 1inch of clearance on each side of the device
(except the side where it rests on a at surface).
• Do not set up this product adjacent to a water source or an environment that has excessive moisture.
• Do not operate the product when hands are wet.
• Place this product on a at surface and keep it out of reach of children.
• Unplug the product when it is not in used for an extended period of time.
• Do not attempt to dismantle the product on your own.
INPUT 4 INPUT 3 INPUT 2
INPUT 1 OUTPUT INPUT 5
INPUT 1
INPUT 2
INPUT 3
INPUT 4
INPUT 5
SELECT
DC 5V IR
1
2
3
8
7
4 5 6
1. HDMI Input Ports 2 to 4
2. HDMI Input LED Indicators
3. HDMI Input Select Button
4. HDMI Input Port 5
5. HDMI Output Port
6. HDMI Input Port 1
7. Power Input Port
8. Infrared Red Receiver Port
5x1 HDMI Switch
How to Connect
1. Use a HDMI cable to connect a HD source to the HDMI Input Port.
2. Use the built-in HDMI cable to connect a HD display.
3. Connect USB Power Cable to a Power Adapter (not included).
4. Connect other end of USB Power Cable into switch.
Remote Control
HDMI x 5
HDMI x 1
4K x 2K @24/25/30/60 fps@60Hz, 3D(1080p@60fps
@60Hz) 1080p@60fps@120Hz
DTS-HD, Dolby-trueHD, LPCM7.1, DTS,
Dolby-AC3, DSD
300 MHz max
8 Gbps max
Yes
Yes
Yes, via HDMI to DVI adapter (not included)
≤50ft/15m AWG24 HDMI standard cable
32°F to 158°F / 0°C to 70°C
5% to 90% RH (No Condensation)
Audio and Video
Environmental
Input
Output
Resolution
Up to 36-bit deep color
Color Depth
Audio Format
Pixel Clock Rate
Total TMDS Throughput
Signal Retiming
EDID RAM
Digital Visual Interface (DVI)
Input Cable Recommendation
≤66ft/20m AWG24 HDMI standard cable
Output Cable Recommendation
Operating Temperature Range
Operating Humidity Range
200mA
Mechanical
Power
Maximum Working Current
3.98 x 3.35 x 0.81in / 101 x 85 x 20.5mm
1.76oz / 50g
Dimension (L x W x H)
Weight
Package IncludesSpecications
•1x Fosmon 5x1 HDMI Switch
• 1x USB Power Cable
• 1x Infrared Red Receiver
• 1x Remote Control
•1x User Manual
1 2
3
4 5
Front Back
Remote Battery Installation
1. Pull out remote and battery
2. Use ngernail to pull out battery tray
3. Place Battery into tray, matching (+) symbols
4. Push tray back into remote
Using Remote
1. Connect IR blaster into HD8192
2. Button < toggles Input sources in descending order
3. Button > toggles Input sources in ascending order
4. Buttons 1, 2, 3, 4, 5 correspond to the Input sources respectively
Follow Us On Social Media Limited Lifetime Warranty
Recycling the Product
FCC Information
This Fosmon product includes a limited lifetime warranty. Please visit our
Fosmon website for more details.
www.fosmon.com
© 2018 Fosmon Technology All rights reserved.
To dispose this product properly, please follow
the recycling process regulated in your area.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
DO NOT RETURN THE PRODUCT
There are good days and there are bad days. It is our BAD if the
product is not working, or if you are not happy with it. PLEASE
GIVE US A CHANCE and WE WILL MAKE IT RIGHT.
1-833-3-Fosmon (833-336-7666)
(612) 435-7508
Troubleshooting
Issue Possible Solution
No Power 1. Check if the USB Power Cable is connected properly.
No Audio or Bad
Quality Audio
1. Check if the audio equipment is on.
2. Check if the input source is on.
3. Check if the input source audio output setting is set up correctly. Please refer to your input source user manual
on how to change this setting.
4. Check all cables and make sure they are fully seated into ports.
5. Try changing to a dierent known good cable.
No Video or Bad
Quality Video
1. Check if the display is on.
2. Check if the input source is on.
3. Check all cables and make sure they are fully seated into ports.
4. Try changing to a dierent known good cable.
Remote Control
Unresponsive
1. Check if the plastic lm has been removed from the back cover.
2. Check if the battery needs to be replaced.
3. Check if the IR Receiver is connected properly.
4. Check if the IR Receiver is facing towards the right direction where it can detect the remote control’s signal.
INPUT 1
INPUT 2
INPUT 3
INPUT 4
INPUT 5
SELECT
5x1 SWITCH
HDTV
Media Player
USB Power Cable
Power Adapter
(not included)
Example Connection
Other Fosmon Switch manuals
