Fortinet FortiAP U432F User manual

FortiAP U432F

FortiAP U234F

Quick Start Guide

About FAP-U432F

IMPORTANT: Supported only from FortiWLC Release 8.6.2 or later and FortiGate with FortiOS Release 6.4.4

and later.

The FAP-U432F is a tri-radio, dual band 802.11ax 2.4/5GHz outdoor access point and supports three 4x4 MIMO

radios. This high performance device complies with the 802.3bt, 802.3at, and 802.3af PoE specications and

supports BLE and ZigBee.

The FAP-U432F supports 11 external 5dBi 2.4/5GHz dual band omni antennas and operates with a default TX

power of (To be updated) dBm in 2.4GHz channels and (To be updated) dBm in 5.0GHz channels.

The FAP-U432F is compatible with FortiWLC enterprise wireless LAN controllers, integrated FortiGate

enterprise rewall LAN controllers, and FortiCloud controllers. This device can be wall mounted or pole

mounted. Use the supplied hardware components to complete installing the unit.

CAUTION:

There is a non-rechargeabe coin battery inside DUT for the RTC function. Do Not recharge the battery as it

may overheat and leak.

FortiAP-U432F QuickStart Guide

FAP-U432F Box Includes

Pole Mount Bracket

Wall Mount Bracket

Sector Antenna Bracket PIN060 POE Adapter

Power Cable

FAP-U432F Box Includes

Grounding Cable

2.4 GHz Antenna

5 GHz Antenna

Dual band (2.4/5GHz) Antenna

Mounting Kit

(Pole Straps, Mounting Bolts and Screws, Grounding Screws)

Ethernet Port (RJ-45) 1 Gigabit Ethernet port

with Power over Ethernet (PoE) support

Console Port (RJ-45)

Optional management computer

connection

Provides access to the Command-Line

Interface (CLI)

Serial Baud Rate 115200

AP Port (PoE output)

Network Port (RJ-45)

Gigabit Ethernet port for network

connection or internet

Power adapter connection

Ethernet Port (RJ-45) 2.5 Gigabit Ethernet port

with Power Sourcing Equipment (PSE) support

FAP-U432F Ports

5 - Bluetooth, ZigBee and Radio 3

No light: Radio 3, BLE, and ZigBee are powered o

Green: Radio 3, BLE, and Zigbee are enabled

Blinking Green: Data Tx/Rx on Radio 3, BLE, and Zigbee

Amber: Radio 3 is up. Blinking Amber: Data Tx/Rx on Radio 3

Blue: BLE is enabled Blinking Blue: Data Tx/Rx on BLE

Red: Zigbee is enabled Blinking Red: Data Tx/Rx on Zigbee

4 - WiFi (Radio 1 and 2)

No light: Radio 1 and 2 are powered O

Blue: Radio 1 is up. Blinking Blue: Data Tx/Rx on Radio 1.

Amber: Radio 2 is up. Blinking Orange : Data Tx/Rx on Radio 2.

Green: Both Radio 1 and 2 are up. Blinking Green: Data Tx/Rx on both Radio 1 and 2.

1 - Power

No light: Power O/Wireless controller not found.

Steady Green: Power On

Blinking Green: Data Tx/Rx at 1Gbps.

Blinking Amber: Data Tx/Rx at 100Mbps.

2 - LAN1 and LAN 2

No light: Link Down

Green: Link up

Blinking Green: Data Tx/Rx at 1Gbps

Blinking Orange: Data Tx/Rx at 100Mbps

FAP-U432F LED Status

FAP-U432F Antennas

The FortiAP unit provides dual concurrent radio signals. Use the 2.4GHz antennas to access 2.4GHz radio

(IEEE 802.11b/g/n) signals and the 5GHz antennas to access 5GHz radio (IEEE 802.11a/n/ac/ax) signals. To use

both radio frequencies concurrently, use all 11 WiFi antennas. Follow this procedure to install the antennas.

1. Insert the antenna base rmly into the appropriate antenna mount.

2. Securely hand tighten the fastening collar

3. Repeat for the remaining antennas

Follow this procedure to attach the unit to a wall using the supplied equipment.

1. Mark the location of the mounting bolt holes on a at wall surface, using the wall-mount base as a

template.

2. Drill mounting holes in the marked locations and hammer the bolts into the openings.

3. Attach the wall-mount base to the back of the access point using the mounting screws.

Wall Mounting FAP-U432F

4. Attach the access point onto the wall using the mounting bolts and secure the mounting base to the

wall.

This manual suits for next models

Table of contents

Other Fortinet Wireless Access Point manuals

Fortinet

Fortinet FortiAP 222C User manual

Fortinet

Fortinet FortiAP 321C User manual

Fortinet

Fortinet FortiAP 28C User manual

Fortinet

Fortinet FortiAP S423E User manual

Fortinet

Fortinet FortiAP 421E Owner's manual

Fortinet

Fortinet FortiAP U231F User manual

Fortinet

Fortinet FortiAP-S Series Quick reference guide

Fortinet

Fortinet FortiAP S322C Owner's manual

Fortinet

Fortinet FortiAP C23JD User manual

Fortinet

Fortinet FortiAP S421E Owner's manual

Fortinet

Fortinet FortiAP 224E User manual

Fortinet

Fortinet FortiAP 223B User manual

Fortinet

Fortinet FortiAP 231G Series User manual

Fortinet

Fortinet FortiAP 831F User manual

Fortinet

Fortinet FortiAP 221E User manual

Fortinet

Fortinet FortiAP U421EV User manual

Fortinet

Fortinet AP1000 User manual

Fortinet

Fortinet FortiAP 432FR User manual

Fortinet

Fortinet FortiAPCam-214B User manual

Fortinet

Fortinet FortiAP-210B User manual

Fortinet

Fortinet FortiAP 11C User manual

Fortinet

Fortinet FortiAP 112D User manual

Fortinet

Fortinet FortiGate FG-200F User manual

Fortinet

Fortinet AP832 User manual

Popular Wireless Access Point manuals by other brands

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Quick installation guide

Ubiquiti

Ubiquiti NanoStation NSM2 quick start guide

Cisco

Cisco Aironet 1550 Series Getting started guide

Aruba

Aruba IAP-335 user guide

Advantek Networks

Advantek Networks AWN-AP-54MR user manual

IP-COM

IP-COM AP355 user guide

Buffalo

Buffalo AirStation WLA-L11G user manual

EnGenius

EnGenius EnStationACv2 user manual

D-Link

D-Link DAP-3662 Quick installation guide

xG Technology

xG Technology xMax CN1300 installation guide

Widelink

Widelink ezWave WAP-1100 Series user guide

Edimax

Edimax CAP1200 user manual

Ubiquiti

Ubiquiti LBE-5AC-Gen2 quick start guide

Aruba

Aruba AP-203R installation guide

LuXout Shades

LuXout Shades LUXSHADE MOTION manual

CreatComm

CreatComm TB5F user manual

SineDigital

SineDigital MW-1500AP(H) installation guide

TP-Link

TP-Link AP9650 V1 Quick installation guide