Fortinet FortiSwitch-80-PoE User manual

QuickStart Guide

FortiSwitch-80-PoE

LED Description

Package Contents

LED State Description

PWR Green The unit is ready and has AC power.

Off The power switch is turned off or the power supply is not connected.

PoE Max Red The power budget has exceeded.

Off Power budget has not exceeded. This is the desired condition.

PoE LED port (1–4)

Green Indicates the port is sending PoE to a powered device.

Red Indicates there is a problem with the power feed to the port.

Off Indicates the PoE is not sourced due to either an issue with the wiring, an incompatible

powered device, or the connected device does not need PoE.

Port Link/Act/Speed LED

(1–8)

Green The interface is connected at Gigabit rate.

Amber The interface is connected at 10/100 Mb rate.

Off The interface is not connected.

Flashing Indicates trafc activity.

Step 1. Unpacking

Provides 62 Watts of dedicated PoE power

Open the shipping carton and carefully unpack its contents. The carton should contain the following items:

• One FS-80-PoE Switch

• One 90W AC-DC power adapter

• One country specic AC power cord

• One Quick Installation Guide (QSG)

• Four rubber feet to be used for shock cushioning

• Warranty Card

If any item is found missing or damaged, please contact your local reseller for replacement.

FortiSwitch-80-PoE User’s Guide is available from the Fortinet website at http://docs.fortinet.com/.

FortiGate-30B

Trademarks

QuickStart Guide

FMC-XG2

ACTIVE

SERVICE

1 (SFP +) 2 (SFP +)

Power adapter

FS-80-PoE switch Power supply

Setup the FortiSwitch-80-PoE using the following steps:

• The surface must support at least 1.5 Kg for the switch.

• The power outlet should be within 1.82 meters (6 feet) of the switch.

• Visually inspect the DC power jack and make sure that it is fully secured to the power adapter.

• Make sure there is adequate ventilation around the switch for proper heat dissipation.

• Do not place heavy objects on the switch.

Step 2. Installing

Products mentioned in this document are trademarks or registered trademarks

of their respective holders.

05 November 2010

11-100-0133349-20101112

Step 3. Connecting

Step 4. Powering on

Connect the switch to the power outlet and then turn the power switch on to activate the switch. The power switch is located at the back of the unit.

The FS-80-PoE can supply power to a PoE capable device over an existing Ethernet cable. If a device is not compatible, or does not operate on

PoE, then the port will not source power to this device. This feature allows users to freely and safely mix legacy and Power over LAN compatible

devices on their network.

The FS-80-PoE supports 8 10/100/1000M Ethernet ports. Ports 1 – 4 supply PoE automatically when connected to a 802.3af compatible device.

Ports 5 – 8 do not provide PoE, and are best suited for uplink ports, PCs and printers. These ports automatically detect and operate in half and full

duplex mode.

The FS-80-PoE provides auto MDI-II or MDI-X cable selection for easy connection using standard or crossover RJ45 cables.

Note

It is important that the PoE is used indoors only. Ensure that Ethernet cable carrying PoE power does not route outside of the building.

Ports 1 - 4 4 × 10/100/1000 Mbps Auto-MDIX RJ45 ports with

POE enabled

Port 5 - 8 4 × 10/100/1000 Mbps Auto-MDIX RJ45 ports

Other Fortinet Switch manuals

Fortinet

Fortinet FortiSwitch 624F Series User manual

Fortinet

Fortinet FortiSwitch-548B v. 5.2.0.2 Instruction Manual

Fortinet

Fortinet FortiSwitchRugged 124D User manual

Fortinet

Fortinet FortiSwitch 108F Series User manual

Fortinet

Fortinet FortiSwitchRugged 112D-POE User manual

Fortinet

Fortinet FortiBridge 3000 Series User manual

Fortinet

Fortinet FortiGate 310B-DC User manual

Fortinet

Fortinet FortiManager 1000D User manual

Fortinet

Fortinet FortiWeb 2000E User manual

Fortinet

Fortinet FortiGate 40F Series User manual

Fortinet

Fortinet FortiSwitch 2048F User manual

Fortinet

Fortinet Fortinet Switch 800F User manual

Fortinet

Fortinet FortiBridge-2002F User manual

Fortinet

Fortinet FortiBridge-2002 User manual

Fortinet

Fortinet MR1 User manual

Fortinet

Fortinet FortiSwitch 424E Series User manual

Fortinet

Fortinet FortiGate 310B User manual

Fortinet

Fortinet FortiSwitch 224D-FPOE User manual

Fortinet

Fortinet FortiSwitch-28C Instruction Manual

Fortinet

Fortinet 5003A Use and care manual

Fortinet

Fortinet FortiBridge-2002 User manual

Fortinet

Fortinet FortiSwitch 248D User manual

Fortinet

Fortinet FortiManager 3700F User manual

Fortinet

Fortinet FortiSwitch-1000 User manual

Popular Switch manuals by other brands

URC

URC Total Control MFS-8 installation manual

Azbil

Azbil HPQ-D11 user manual

Sony

Sony DFS-900M operating instructions

SICK

SICK i17S operating instructions

F&F

F&F SZR-277 quick start guide

Shure

Shure UAMS/BK user guide

Dräger

Dräger X-zone Switch Off Instructions for use

Asco

Asco Joucomatic 349 Series manual

BT Mini Hub user guide

D-Link

D-Link DES-1226G manual

Johnson Controls

Johnson Controls FS80-C installation instructions

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Configuration guide

MicroNet

MicroNet SP1200A user manual

Ruijie

Ruijie RG-PF2920 Series Hardware installation and reference guide

Altinex

Altinex DA1914SX user guide

MiLAN

MiLAN MIL-SM2401M user guide

RJM

RJM MASTERMIND PBC/6X user manual

Atlas

Atlas MMK-KVM8 owner's manual