Fortinet FortiSandbox 1000D User manual
FortiSandbox 1000D
QuickStart Guide
April 01, 2014
34-110-214953-20140401
Copyright© 2014 Fortinet, Inc. All rights reserved. Fortinet®, FortiGate®,
FortiCare® and FortiGuard®, and certain other marks are registered trademarks
of Fortinet, Inc., and other Fortinet names herein may also be registered and/or
common law trademarks of Fortinet. All other product or company names may be
trademarks of their respective owners. Performance and other metrics contained
herein were attained in internal lab tests under ideal conditions, and actual
performance and other results may vary. Network variables, different network
environments and other conditions may affect performance results. Nothing
herein represents any binding commitment by Fortinet, and Fortinet disclaims
all warranties, whether express or implied, except to the extent Fortinet enters a
binding written contract, signed by Fortinet’s General Counsel, with a purchaser
that expressly warrants that the identified product will perform according to
certain expressly-identified performance metrics and, in such event, only the
specific performance metrics expressly identified in such binding written contract
shall be binding on Fortinet. For absolute clarity, any such warranty will be limited
to performance in the same ideal conditions as in Fortinet’s internal lab tests.
Fortinet disclaims in full any covenants, representations,and guarantees pursuant
hereto, whether express or implied. Fortinet reserves the right to change, modify,
transfer, or otherwise revise this publication without notice, and the most current
version of the publication shall be applicable.
Table of Contents
Package Contents 1
Installation 2
SFP Transceivers 4
Configuring Your Device 6
Technical Specifications 8
LED Specifications 1 9
LED Specifications 2 10
Cautions and Warnings 11
Regulatory Notices 13
Documentation and Links 14
Register Your Product 15
Product License Agreement 16
This page intentionally left blank.
Package Contents
Tools and Documentation
FortiSandbox 1000D
QuickStart Guide
Tools and
Documentation
CD
QuickStart Guide
2 Rack-Mount
Brackets
2 Power Cables Console Cable
4 Rubber
Feet
12 Bracket
Screws
2 Grounding
Screws
Ethernet Cable
Fortinet’s consolidated security solutions provide an integrated set
of core security and network services in a single, easy-to-manage,
high-performance appliance that is capable of supporting a wide
range of deployment scenarios.
Your box contains the following:
FortiSandbox 1000D Ethernet Cable
QuickStart Guide 4 Rubber Feet
Tools and Documentation CD 2 Grounding Screws
2 Power Cables 12 Bracket Screws
Console Cable 2 Rack-Mount Brackets
Page 1
Note: Accessories may not be exactly as shown.
The FortiSandbox unit can be placed on any flat surface, or mounted in any
standard 19 inch rack unit with the provided rack-mount brackets and screws.
Please read the Cautions and Warnings section prior to installing your device.
Caution: Electrostatic discharge (ESD) can damage your Fortinet equipment.
Caution: Do not place heavy objects on the unit.
To install the FortiSandbox unit into a rack:
Caution: To avoid personal injury or damage to the unit, it is recommended that
two or more people install the unit into the rack.
1. Ensure that the FortiSandbox unit is placed on a stable surface prior to rack-
mount installation.
2. Attach the provided rack-mount brackets to the sides of the unit using the
provided screws.
a. If you are installing the unit into a four-post rack, attach the rack-mount brackets
with the handles aligned with the front of the unit.
b. If you are installing the unit into a two-post rack, attach the rack-mount brackets
with the handles aligned with the middle of the unit.
Installation
Page 2
3. Position the FortiSandbox unit in the rack. Ensure there is enough room around
the unit to allow for sufficient air flow.
4. Line up the rack-mount bracket holes to the holes on the rack and ensure that the
FortiSandbox unit is level.
5. Finger tighten four rack-mount screws to attach the unit to the rack.
6. Verify that the spacing around the FortiSandbox unit conforms to requirements
and that the unit is level, then tighten the rack-mount screws with an appropriate
screwdriver.
7. Using the provided power cables, plug the cables into the rear of the unit, and
then into a grounded electrical outlet or a separate power source such as an
uninterruptible power supply (UPS) or a power distribution unit (PDU).
Note: If the unit has a redundant power supply, each power cable should be
connected to a different power source. In this way, if one power source fails, the
other may still be operational and the unit will not lose power.
To install the unit on a flat surface:
1. Ensure that the surface onto which the FortiSandbox unit to be installed is clean,
level, and stable and that there is at least 1.5in (3.8cm) of clearance on all sides to
allow for adequate airflow.
2. Attach the provided rubber feet to the bottom of the FortiSandbox unit.
3. Place the unit in the designated location.
4. Verify that the spacing around the FortiSandbox unit conforms to requirements
and that the unit is level.
5. Using the provided power cables, plug the cables into the rear of the unit, and
then into a grounded electrical outlet or a separate power source such as an
uninterruptible power supply (UPS) or a power distribution unit (PDU).
Note: If the unit has a redundant power supply, each power cable should be
connected to a different power source. In this way, if one power source fails, the
other may still be operational and the unit will not lose power.
Page 3
1.5in 1.5in
Caution: SFP transceivers are static sensitive devices. Use an ESD wrist strap or
similar grounding device when handling transceivers.
Caution: Do not install or remove SFP transceivers while fiber-optic cables are still
attached. This can cause damage to the cables, cable connectors, and the optical
interfaces. It may also prevent the transceiver from latching correctly into the socket
connector.
Note: Installing and removing SFP transceivers can shorten their useful life. Do not
install or remove transceivers more than is necessary.
To install the SFP transceivers:
1. Ensure that you are properly grounded.
2. Remove the caps from SFP cage sockets on the front panel of the unit.
3. Position the SFP transceiver in front of the cage socket opening and ensure that
the transceiver is correctly oriented.
When the transceiver is correctly oriented, the extraction lever will be level with
the socket latch.
Note: SFP cage socket orientation may vary. Ensure that the SFP transceiver
module is correctly oriented each time that you are inserting a transceiver.
4. Hold the sides of the SFP transceiver and slide it into the cage socket until it clicks
into place.
SFP Transceivers
Extraction Lever
Transmit
Optical Bore
Receive
Optical Bore Socket Latch
SFP Cage Sockets
Page 4
Caution: Do not force the SFP transceivers into the cage slots. If the transceiver
does not easily slide in and click into place, it may not be aligned correctly or may
be upside down. If this happens, remove the SFP transceiver, realign it or rotate it
and slide it in again.
5. Press the transceiver firmly into the cage socket with your thumb.
6. Verify that the transceiver is latched correctly by grasping the sides of the
transceiver and trying to pull it out without lowering the extraction lever.
If the transceiver cannot be removed, it is installed and latched correctly.
If the transceiver can be removed, reinsert it and press harder with your thumb.
If necessary, repeat this process until the transceiver is securely latched into the
cage socket.
To remove the SFP transceivers:
1. Ensure that you are properly grounded.
2. If applicable, disconnect the fiber-optic cable from the transceiver connector and
install a clean dust plug in the transceiver’s optical bores.
3. Pull the extraction lever out and down to eject the transceiver.
If you are unable to use your finger to open the lever, use a small flat-head
screwdriver or other similar tool to open the lever.
4. Hold the sides of the transceiver and carefully pull it away from the cage socket.
5. Replace the cap on the SFP cage socket and place the removed SFP transceiver
into an antistatic bag.
Note: Follow proper fiber-optic handling procedures when installing and removing
SFP transceivers to ensure the devices remain clean and are not damaged.
Page 5
Configuring Your Device
The FortiSandbox unit requires some basic configuration to add it to
your network. These basic steps include assigning IP addresses, DNS
settings, and the default gateway. Until these steps are completed
traffic will not flow through the device.
The FortiSandbox unit can be configured using the Web-based
Manager.
To connect to the Web-based Manager:
1. Connect the FortiSandbox unit Ethernet port 1 to a management
computer using the provided Ethernet cable.
2. Configure the management computer to be on the same subnet as
the internal interface of the FortiSandbox unit:
• IP address: 192.168.0.2
• Netmask: 255.255.255.0
3. To access the FortiSandbox unit Web-based Manager, start a
browser of your choice and browse to https://192.168.0.99.
4. Type admin in the Name field, leave the Password field blank, and
select Login.
You can now proceed with configuring your FortiSandbox unit.
Note: The FortiSandbox uses Ethernet port 3 to provide scanned
executable files outgoing communication. This is done to help
determine if the file is malicious. For this reason, Ethernet port 3
should be connected to an isolated network behind a firewall.
Note: Ethernet port 1 only supports HTTPS, HTTP, SSH, and Telnet
services. With the exception of https, these services can be disabled
using the Web-based Manager.
Page 6
Table of contents
Other Fortinet Gateway manuals
Fortinet
Fortinet FortiGate 310B User manual
Fortinet
Fortinet FortiGate 30B User manual
Fortinet
Fortinet FortiVoice FVG-GT01 User manual
Fortinet
Fortinet FortiADC 60F User manual
Fortinet
Fortinet FortiGate-60M User manual
Fortinet
Fortinet FortiGate 60M User manual
Fortinet
Fortinet FortiGate-600C User manual
Fortinet
Fortinet FortiGate 3040B User manual
Fortinet
Fortinet FortiGate 110C User manual
Fortinet
Fortinet FortiVoice FXO Quick reference guide
Fortinet
Fortinet FortiGate 60B User manual
Fortinet
Fortinet FortiGate-600C-LENC User manual
Fortinet
Fortinet FortiGate 620B User manual
Fortinet
Fortinet FortiGate 4000 User manual
Fortinet
Fortinet FortiGate-200B-POE User manual
Fortinet
Fortinet FortiGate 3140B User manual
Fortinet
Fortinet FortiVoice FVG-GO08 User manual
Fortinet
Fortinet FortiGate 80C-LENC User manual
Fortinet
Fortinet FortiVoice Gateway GT01 Quick reference guide
Fortinet
Fortinet FortiVoice GO08 Instruction Manual
Popular Gateway manuals by other brands
LST
LST M500RFE-AS Specification sheet
Kinnex
Kinnex Media Gateway quick start guide
2N Telekomunikace
2N Telekomunikace 2N StarGate user manual
Mitsubishi Heavy Industries
Mitsubishi Heavy Industries Superlink SC-WBGW256 Original instructions
ZyXEL Communications
ZyXEL Communications ZYWALL2 ET 2WE user guide
Telsey
Telsey CPVA 500 - SIP Technical manual
