Fortin EVO-ONE User manual

OMEGALINK GUIDE # 90791 - REV.: 20211102

OL-RF-52-SST

2-way

5-button RF Kit

OL-RF-15-SST

2-way

1-button RF Kit

OL-RF-42-SST

2-way

5-button RF Kit

OL-RF-12-SST

1-way

1-button RF Kit

OL-RF-32-SST

1-way

5-button RF Kit

Parts required (not included):

1x FLASH-LINK UPDATER

1x Microsoft Windows Computer with Internet connection

1Plug in the FLASH-LINK UPDATER into the computer’s USB port with the

provided USB cable.

2Run Flash Link Manager Software.

PAGE 2 / 4 OMEGALINK

3Plug in the EVO-ONE into the FLASH-LINK UPDATER with provided

DATALINK cable.

CLICK on the remote starter tab.

5CLICK on VIEW OTHER FIRMWARE,

scroll down.

6SELECT and ash version

OM 0.44 FOR OMEGALINK.

6CLICK on CONFIRM.

PAGE 3 / 4 OMEGALINK

DCBHIJ

Red White Blue Blue Black

CONNECT the OMEGALINK in the Blue 4pin connector with clip of the

EVO-ONE using a 4pin connector with clip.

Do not force in an incompatible connector.

WITH IGNITION SWITCH WITH VALET SWITCH

8Turn the

Ignition ON.

Turn the

Ignition ON.

9Turn the Ignition OFF. Press and hold the Valet button until the RED

light ashes on EVO-ONE, then release it

10 Turn the

Ignition ON. x5

Press and release the valet switch ve time.

The parking lights will ash and the horn/siren

will chirp each time to conrm.

11 x4 Press and release the brake pedal four

times. x1 Press and release the brake pedal once.

On each Transmitter press and release the LOCK button

On each Transmitter press and release the START button

13 Turn the Ignition OFF. Turn the Ignition OFF.

PAGE 4 / 4 OMEGALINK

MODE 1 - LOCK

MODE 2 - UNLOCK

MODE 3 - TRUNK

MODE 4 - START

MODE 5 - AUX.1

MODE 6 - AUX.2

If you want to change EVO-ONE options, use the following button

mapping.S

WARNING

NOTICE The manufacturer will accept no responsibility for any electrical damage resulting from improper installation of the product,

including either damage to the vehicle itself or to the remote-starter module. This module must be installed by a certied technician

including all of the supplied safety devices. Please note that this guide has been written for trained professional technicians, a certain

level of skills and knowledge is therefore assumed.

Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this mo-

dule, except for the replacement of this module in case of manufacturing defects. This module must be install by qualied technician.

This instruction guide may change without notice.

To download the installation guide, user guide, or the latest quick installation guide, visit: www.fortin.ca

Technical support: TEL: 514-255-4357 / 1-877-336-7797

Other manuals for EVO-ONE

This manual suits for next models

Popular Remote Starter manuals by other brands

AstroStart

AstroStart 803U user manual

Durite

Durite 0-649-20 Leaflet

EINHELL

EINHELL BT-PS 1000 Directions for use

Linear

Linear ACCESS AK-21 Installation and programming instructions

Soundstream

Soundstream TARANTULA RS.2 installation guide

Jaycar Electronics

Jaycar Electronics MB3752 instruction manual

Ultra Start

Ultra Start 72 Series owner's manual

ADS

ADS FLASHLOGIC FLRSVW1 Product guide

Selecta

Selecta JS012 instruction manual

Black Widow Security

Black Widow Security BW RAS 400 installation manual

Vector

Vector Power City DK080706 Owner's manual & warranty

Code Alarm

Code Alarm CA-535 owner's manual

Ozito

Ozito OJS-800 instruction manual

Profi-Partner

Profi-Partner 46387 instruction manual

EZ STARTER

EZ STARTER EZ-45 user guide

Viper

Viper 4204 owner's guide

Essex Electronics

Essex Electronics KE-1701 user guide

EINHELL

EINHELL EGS 3600 Directions for use