Fortessa FTDEV1 Series User manual

USER MANUAL

• Please read this manual carefully to ensure safe and correct operation.

• Keep this manual well for future reference.

FTDEV1 FTDEV2P

FTDEV1 Series

2 WIRE SYSTEM

CONTENTS

PARTS AND FUNCTIONS..................................................................................... 1

Part Names............................................................................................................. 1

Mounting................................................................................................................. 1

External Motion Detection ...................................................................................... 2

SETUP INSTRUCTIONS........................................................................................ 3

Functions Setting Up .............................................................................................. 3

Setting Door Station Address ................................................................................. 4

Setting Door Station Calling Mode ......................................................................... 4

Setting Unlock Mode .............................................................................................. 6

Setting Unlock Time................................................................................................ 6

Setting Nameplate Illumination Mode..................................................................... 7

Setting Night View LED Illumination Mode............................................................. 7

Setting Ring-back Tone .......................................................................................... 8

WIRING .................................................................................................................. 9

Connecting Electric Lock........................................................................................ 9

Connecting Basic One-to-one ............................................................................... 10

Connecting Multi Door Stations............................................................................. 10

Connecting Multi Monitors..................................................................................... 11

APPENDIX ............................................................................................................ 13

Precautions............................................................................................................ 13

Specication .......................................................................................................... 13

Cables and Requirments....................................................................................... 14

-1-

Part Names

PARTS AND FUNCTIONS

[11] [10]

[9]

[1]

[3]

[4]

[8]

[7]

[6]

[5]

[12]

[13]

[2]

[1] Microphone

[2] UNLOCK indicator

[3] CALL indicator

[4] Call button

[5] Nameplate

[6] Front panel

[7] Speaker

[8] Night view LED

[9] Camera lens

[10] Rain shield

[11] Mounting bracket

[12] Connection

[13] Front Panel Screw

Mounting

1 2 3 4 5

AcDbMLeader (ACDB_MLEADER_CLASS)

Rainy cover

The distance between

the top of main unit

and rain cover should

be not less than 3mm.

Main unit

≥3mm

1. Connect the cable correctly.

2. Use the appropiate xing, then attach the rain shield and main unit to the wall, the distance

between the top of main unit and rain cover should be not less than 3mm.

3. Install the name plate.

4. Attach the front panel to the main unit.

5. Use the special screwdriver and the screw to x the panel.

The installation height is suggested to 145~160cm.

-2-

PARTS AND FUNCTIONS

Terminal description

Lock Control Jumper: To select the lock type.

Motion Detector Terminals: To connect external PIR motion detector. * (compatible monitor

required)

Terminal Connections: To connect the bus line and the electronic locks.

• L1,L2: Connect to the bus line, Non polarity.

• PL: External lock power input, connect to the power positive (power +).

• S+: Lock power (+) output.

• S-: Lock power (-) output, connect to the power (-) input of locks (only use and connect if the

door panel is powering the lock directly. DO NOT use if a remote PSU is powering the lock).

1 2 3

Lock Control Jumper

PIR Motion Detector

Terminal

* (compatible monitor required)

+12V

GND

PIR

L1 L2

S+ S-

Terminal Connections

External Motion Detection

* Note: The supplied monitor (FTDEVM43) in the

kit does not support motion detection function.

The door station is equipped with a terminal to

connect external motion detector.

If the external motion detector is connected to

the system,following functions will be effective:

If detect someone passing by, the door station can be activated operation to unlock or turn on

light.

12V

Motion

detector

GND

PIR

-3-

SETUP INSTRUCTIONS

Functions Set Up

KEY_1

KEY_2

KEY_3

KEY_4

KEY_SET

LED_UNLOCK

LED_TALK

LED_NAME

This section explains the settings of each

function, please refer to the following ta-

ble:

To perform the function settings, remove

the metal front panel.

Each operation is indicated by the lighting

up of the LED indicator on the unit, and by

the sound of the buzzer.

Order Setting items Setting range Default value

1 Setting door station address 0~3 0

2Setting door station

calling mode Standard/Group calling mode Standard calling mode

3 Setting the unlock mode 0:opened/1:closed 0:opened

4 Setting the unlock time 01 to 99 seconds 1 seconds

5Setting the nameplate

illumination mode On/Off/Auto On

6Setting night view LED

illumination mode On/Off/Auto Auto

7 Setting ring-back tone

Ring Once

Ring continuously

No ring-back tone

Ring Once

-4-

Setting Door Station Address

Setting Door Station Calling Mode

A maximum of 4 door station can be addressed and congured. This can be modied either be-

fore or after installation.

0 is default, to change the setting, please follow the steps:

UNLOCK Indicator:OFF

TALK Indicator:OFF Buzzer Beep+, Beep

UNLOCK Indicator:OFF

TALK Indicator:OFF

Buzzer Beep+

In standby mode, press

KEY_SET button once

Press KEY_1 button to set

the first door station.

Press KEY_2 button to set

the second door station.

Press KEY_3 button to set

the third door station.

Press KEY_4 button to set

the fourth door station.

UNLOCK Indicator:OFF

TALK Indicator:OFF

Buzzer Beep,Beep

UNLOCK Indicator:OFF

TALK Indicator:OFF

Buzzer Beep,Beep,Beep

UNLOCK Indicator:OFF

TALK Indicator:OFF

Buzzer Beep,Beep,Beep,Beep

ID=0,1st door station ID=1,2nd door station ID=2,3rd door station ID=3,4th door station

SETUP INSTRUCTIONS

• During Setting Mode, you can change the address of door station by pressing KEY1~4 at any time.

• The LED_NAME indicator will continue to blink while in Setting mode.

• The Setting Mode will exit 10 seconds after the last button has been pressed.

• To exit Setting Mode, press KEY_SET button four times.

There are two calling modes for door station,Standard calling mode and Group calling mode.

The door station default is Standard Calling mode.

-5-

• During Setting Mode, you can change the calling mode by pressing KEY1 repeatedly.

• The LED_NAME indicator will continue to blink while in Setting mode.

• The Setting Mode will exit 10 seconds after the last button has been pressed.

• To exit Setting Mode, press KEY_SET button three times.

SETUP INSTRUCTIONS

* More details about code setting for monitor, please refer to corresponding user manual .

Each call button will respond to different addresses when set in different calling mode. Refer to

the followings for more informations.

Call buttonA: call the monitor with address 01 by default.

Call buttonB: call the monitor with address 02 by default.

Call buttonA: Call all monitors in group address from

00~15.(one of the monitor should be set to 00)

Call buttonB: Call all monitors in group address from

16~31. (one of the monitor should be set to 16)

UNLOCK Indicator:OFF

TALK Indicator:ON

Buzzer Beep+, Beep

In standby mode, press

KEY_SET button twice.

UNLOCK Indicator:OFF

TALK Indicator:ON

Buzzer Beep+

Press KEY_1 button to

activate Standard calling

mode for door station.

UNLOCK Indicator:OFF

TALK Indicator:ON

Buzzer Beep, Beep

Press KEY_1 button again

to activate Group calling

mode for door station.

Press KEY_1

A A

1.Standard calling mode(Address range 01-04

by default)

2.Group calling mode

To change this setting:

-6-

SETUP INSTRUCTIONS

Setting Unlock Mode

There are 2 unlock modes, Normally open and Normally closed.

Normally open is default, to change the setting:

UNLOCK Indicator:ON

TALK Indicator:OFF

Buzzer Beep+, Beep

In standby mode, press

KEY_SET button three

times.

UNLOCK Indicator:ON

TALK Indicator:OFF

Buzzer Beep+

Press KEY_1 button to set

the unlock mode to

Normally open.

UNLOCK Indicator:ON

TALK Indicator:OFF

Buzzer Beep, Beep

Press KEY_1 button again

to set the unlock mode to

Normally closed.

Press KEY_1

• During Setting Mode, you can change the unlock mode by pressing KEY1 repeatedly.

• The LED_NAME indicator will continue to blink while in Setting mode.

• The Setting Mode will exit 10 seconds after the last button has been pressed.

• To exit Setting Mode, press KEY_SET button twice.

Setting Unlock Time

By default, the unlock time is 1s, this can be altered from 1s~99s.

Follow the steps:

UNLOCK Indicator:ON

TALK Indicator:OFF

Buzzer Beep+, Beep

In standby mode, press

KEY_SET button three

times.

UNLOCK Indicator:ON

TALK Indicator:OFF

Buzzer Beep,Beep......

Press and hold on KEY_2

button. The time you holding

on is the new unlock time.

• When entering time delayed setting, the buzzer sounds once for every second.

• The LED_NAME indicator will continue to blink while in Setting mode.

• The Setting Mode will exit 10 seconds after the last button has been pressed.

• To exit Setting Mode, press KEY_SET button twice.

-7-

SETUP INSTRUCTIONS

Setting Nameplate Illumination Mode

There are 3 illumination modes for nameplate indicator, Normally on, Normally off and Auto.

Normally on is default, to change the setting, please follow the steps:

UNLOCK Indicator:ON

TALK Indicator:OFF

Buzzer Beep+, Beep

In standby mode, press

KEY_SET button three

times.

UNLOCK Indicator:ON

TALK Indicator:OFF

Buzzer Beep+

Press KEY_3 button to set

the nameplate illumination

mode to Normally on.

UNLOCK Indicator:ON

TALK Indicator:OFF

Buzzer Beep, Beep

Press KEY_3 button again

to set the nameplate illumina-

tion mode to Normally off.

UNLOCK Indicator:ON

TALK Indicator:OFF

Buzzer Beep, Beep,Beep

Press KEY_3 button again

and again to set the nameplate

illumination mode to Auto.

Press KEY_3

• If setting mode has not been exited, you can change the nameplate illumination mode by pressing KEY3

repeatedly.

• The LED_NAME indicator will continue to blink while in Setting mode.

• The Setting Mode will exit 10 seconds after the last button has been pressed.

• To exit Setting Mode, press KEY_SET button twice.

Setting Night View LED Illumination Mode

There are 3 working modes for night view LED indicator, Normally on, Normally off and Auto.

Auto is default, to change the setting:

UNLOCK Indicator:ON

TALK Indicator:OFF

Buzzer Beep+, Beep

In standby mode, press

KEY_SET button three

times.

UNLOCK Indicator:ON

TALK Indicator:OFF

Buzzer Beep+

Press KEY_4 button to set

the night view LED mode

to Normally on.

UNLOCK Indicator:ON

TALK Indicator:OFF

Buzzer Beep, Beep

Press KEY_4 button again

to set the night view LED

mode to Normally off.

UNLOCK Indicator:ON

TALK Indicator:OFF

Buzzer Beep, Beep,Beep

Press KEY_4 button again

and again to set the night

view LED mode to Auto.

Press KEY_4

• If setting mode has not been exited, you can change the night view LED illumination mode by pressing

KEY4 repeatedly.

• The LED_NAME indicator will continue to blink while in Setting mode.

• The Setting Mode will exit 10 seconds after the last button has been pressed.

• To exit Setting Mode, press KEY_SET button twice.

This manual suits for next models

Table of contents

Other fortessa Intercom System manuals

fortessa

fortessa FTDEV1P User manual

fortessa

fortessa DIGI-2 User manual

fortessa

fortessa FTDEVM2 User manual

Popular Intercom System manuals by other brands

Bticino

Bticino LINEA 3000 Installation

MSI

MSI MSI-140 owner's manual

golmar

golmar Stadio Plus instruction manual

CyberData

CyberData 011211 series Installation quick reference

Vidos

Vidos duo M1021 user manual

Vimar

Vimar ELVOX 7539/E Installation and operation manual

SSS Siedle

SSS Siedle BTSV 850-03 operating instructions

Dahua

Dahua VTO Series quick start guide

Elvox

Elvox 5651 Wiring instructions

Videx

Videx VIDEOKIT Series owner's manual

Rocom

Rocom Doortello Business FW T2.05W2.04 user guide

Viking

Viking E-35-EWP product manual

Safeguard Supply

Safeguard Supply LRA-EX1000 user manual

SSS Siedle

SSS Siedle BFCV 850 Series operating instructions

GRD

GRD MAX V2 user manual

Alecto

Alecto ADI-250 user manual

Aiphone

Aiphone IE-8MD Installation & operation manual

Perel

Perel EDB4 user manual

fortessa FTDEV1 Series User manual

Popular Intercom System manuals by other brands